Multiple crack propagation by DBEM in a riveted butt-joint: a simplified bidimensional approach

A Multi-Site Damage (MSD) crack growth simulation is presented, carried out by means of Dual Boundary Element Method (DBEM), in a two-dimensional analysis of a cracked butt-joint made of aluminium 2024 T3. An equivalent crack length is proposed for an approximated 2D analysis of a 3D problem where the crack front assumes a part elliptical shape due to secondary bending effects. The assumptions made to perform such simplified bidimensional analyses are validated by comparing numerical results with experimental data, the latter obtained from a fatigue tested riveted butt-joint

Residual strength evaluation by DBEM for a cracked lap joint

The present work summarizes a numerical procedure aimed at the evaluation of the residual strength of a cracked lap joint, based on the competing failure mechanisms regulated by the R-curve analysis and plastic collapse. The model adopted for Stress Intensity Factors (SIFs) evaluation is based on the use of the Dual Boundary Element Method (DBEM) within the theoretical frame of Linear Elastic Fracture Mechanics (LEFM). The value of failure load was available from experiments, allowing a comparison with numerical results and consequent validation of the described procedure

BEM Simulation and Experimental Test of a FML Full Scale Aeronautic Panel Undergoing Biaxial Static Load

This paper concerns the numerical and experimental characterization ofthe static and fatigue strength of a flat stiffened panel, designed as a fiber metal laminates (FML) and made of Aluminum alloy and Fiber Glass FRP. The panel is full scale and was tested under both static and fatigue biaxial loads, applied by means of an in house designed and built multi-axial fatigue machine. The static test is simulated by the Boundary Element Method (BEM) in a two-dimensional approach (only allowance for membrane stresses). The strain gauge outcomes are compared with corresponding numerical results, getting a satisfactory correlation. After the static test, an initial notch is created in the panel and the aforementioned biaxial fatigue load is applied, causing a crack initiation and propagation; the related experimental initiation times and crack growth rates are provided

Multiple crack propagation by DBEM in a riveted butt-joint: a simplified bidimensional approach

A Multi-Site Damage (MSD) crack growth simulation is presented, carried out by means of Dual Boundary Element Method (DBEM), in a two-dimensional analysis of a cracked butt-joint made of aluminium 2024 T3. An equivalent crack length is proposed for an approximated 2D analysis of a 3D problem where the crack front assumes a part elliptical shape due to secondary bending effects. The assumptions made to perform such simplified bidimensional analyses are validated by comparing numerical results with experimental data, the latter obtained from a fatigue tested riveted butt-joint

Retardation effects due to overloads in aluminium-alloy aeronautical components

Fatigue data are generally derived under constant-amplitude loading conditions, but aircraft components are subjected to variable-amplitude loading. Without interaction effects, caused by overloads and underloads intermingled in a loading sequence, it could be relatively easy to establish a crack growth curve by means of a cycle-by-cycle integration. However, load-spectrum effects largely complicate a crack growth under variable-amplitude cycling. In this paper, fatigue crack growth behaviour of aeronautical aluminium alloy 2024-T3 was studied. Effects of various loading conditions such as stress ratio and amplitude loadings were investigated. In particular, the effect of different overloads on the fatigue crack growth was simulated using Zencrack code. Preliminary analyses on Compact Tension (CT) specimens proved that the numerical results generated were in agreement with the results provided by an afgrow code for the same conditions. A case study was carried out on a helicopter component, undergoing repeated overloads, to compare numerical results obtained implementing yield zone models in Zencrack.N/

Coupled FEM-DBEM method to assess crack growth in magnet system of Wendelstein 7-X

The fivefold symmetric modular stellarator Wendelstein 7-X (W7-X) is currently under construction in Greifswald, Germany. The superconducting coils of the magnet system are bolted onto a central support ring and interconnected with five so-called lateral support elements (LSEs) per half module. After welding of the LSE hollow boxes to the coil cases, cracks were found in the vicinity of the welds that could potentially limit the allowed number N of electromagnetic (EM) load cycles of the machine. In response to the appearance of first cracks during assembly, the Stress Intensity Factors (SIFs) were calculated and corresponding crack growth rates of theoretical semi-circular cracks of measured sizes in potentially critical position and orientation were predicted using Paris’ law, whose parameters were calibrated in fatigue tests at cryogenic temperature. In this paper the Dual Boundary Element Method (DBEM) is applied in a coupled FEM-DBEM approach to analyze the propagation of multiple cracks with different shapes. For this purpose, the crack path is assessed with the Minimum Strain Energy density criterion and SIFs are calculated by the Jintegral approach. The Finite Element Method (FEM) is adopted to model, using the commercial codes Ansys or Abaqus;, the overall component whereas the submodel analysis, in the volume surrounding the cracked area, is performed by FEM (“FEM-FEM approach”) or alternatively by DBEM (“FEM-DBEM approach”). The “FEM-FEM approach” considers a FEM submodel, that is extracted from the FEM global model; the latter provide the boundary conditions for the submodel. Such approach is affected by some restrictions in the crack propagation phase, whereas, with the “FEM-DBEM approach”, the crack propagation simulation is straightforward. In this case the submodel is created in a DBEM environment with boundary conditions provided by the global FEM analysis; then the crack is introduced and a crack propagation analysis has been performed to evaluate the effects of the crack shape and of the presence of nearby cracks on the allowed number of EM load cycles

Residual stress effects and damage tolerance behaviour of integral lightweight structures manufactured by FSW and HSM

Estágio realizado na empresa Airbus Operations GmbH, orientado pelo Mr. Marco PacchioneTese de Programa Doutoral. Engenharia Mecânica. Universidade do Porto. Faculdade de Engenharia. 201