986 research outputs found
Rate-Splitting Robustness in Multi-Pair Massive MIMO Relay Systems
Relay systems improve both coverage and system capacity. Toward this direction, a full-duplex (FD) technology, being able to boost the spectral efficiency by transmitting and receiving simultaneously on the same frequency and time resources, is envisaged to play a key role in future networks. However, its benefits come at the expense of self-interference (SI) from their own transmit signal. At the same time, massive multiple-input massive multiple-output systems, bringing unconventionally many antennas, emerge as a promising technology with huge degrees-of-freedom. To this end, this paper considers a multi-pair decode-and-forward FD relay channel, where the relay station is deployed with a large number of antennas. Moreover, the rate-splitting (RS) transmission has recently been shown to provide significant performance benefits in various multi-user scenarios with imperfect channel state information at the transmitter (CSIT). Engaging the RS approach, we employ the deterministic equivalent analysis to derive the corresponding sum-rates in the presence of interferences. Initially, numerical results demonstrate the robustness of RS in half-duplex (HD) systems, since the achievable sum-rate increases without bound, i.e., it does not saturate at high signal-to-noise ratio. Next, we tackle the detrimental effect of SI in FD. In particular, and most importantly, not only FD outperforms HD, but also RS enables increasing the range of SI over which FD outperforms HD. Furthermore, increasing the number of relay station antennas, RS appears to be more efficacious due to imperfect CSIT, since SI decreases. Interestingly, increasing the number of users, the efficiency of RS worsens and its implementation becomes less favorable under these conditions. Finally, we verify that the proposed DEs, being accurate for a large number of relay station antennas, are tight approximations even for realistic system dimensions.Peer reviewedFinal Accepted Versio
Joint Relay Selection and Power Allocation in Large-Scale MIMO Systems with Untrusted Relays and Passive Eavesdroppers
In this paper, a joint relay selection and power allocation (JRP) scheme is
proposed to enhance the physical layer security of a cooperative network, where
a multiple antennas source communicates with a single-antenna destination in
presence of untrusted relays and passive eavesdroppers (Eves). The objective is
to protect the data confidentially while concurrently relying on the untrusted
relays as potential Eves to improve both the security and reliability of the
network. To realize this objective, we consider cooperative jamming performed
by the destination while JRP scheme is implemented. With the aim of maximizing
the instantaneous secrecy rate, we derive a new closed-form solution for the
optimal power allocation and propose a simple relay selection criterion under
two scenarios of non-colluding Eves (NCE) and colluding Eves (CE). For the
proposed scheme, a new closed-form expression is derived for the ergodic
secrecy rate (ESR) and the secrecy outage probability as security metrics, and
a new closed-form expression is presented for the average symbol error rate
(SER) as a reliability measure over Rayleigh fading channels. We further
explicitly characterize the high signal-to-noise ratio slope and power offset
of the ESR to highlight the impacts of system parameters on the ESR. In
addition, we examine the diversity order of the proposed scheme to reveal the
achievable secrecy performance advantage. Finally, the secrecy and reliability
diversity-multiplexing tradeoff of the optimized network are provided.
Numerical results highlight that the ESR performance of the proposed JRP scheme
for NCE and CE cases is increased with respect to the number of untrustworthy
relays.Comment: 18 pages, 10 figures, IEEE Transactions on Information Forensics and
Security (In press
Dispensing with channel estimation: differentially modulated cooperative wireless communications
As a benefit of bypassing the potentially excessive complexity and yet inaccurate channel estimation, differentially encoded modulation in conjunction with low-complexity noncoherent detection constitutes a viable candidate for user-cooperative systems, where estimating all the links by the relays is unrealistic. In order to stimulate further research on differentially modulated cooperative systems, a number of fundamental challenges encountered in their practical implementations are addressed, including the time-variant-channel-induced performance erosion, flexible cooperative protocol designs, resource allocation as well as its high-spectral-efficiency transceiver design. Our investigations demonstrate the quantitative benefits of cooperative wireless networks both from a pure capacity perspective as well as from a practical system design perspective
A Simple Cooperative Diversity Method Based on Network Path Selection
Cooperative diversity has been recently proposed as a way to form virtual
antenna arrays that provide dramatic gains in slow fading wireless
environments. However most of the proposed solutions require distributed
space-time coding algorithms, the careful design of which is left for future
investigation if there is more than one cooperative relay. We propose a novel
scheme, that alleviates these problems and provides diversity gains on the
order of the number of relays in the network. Our scheme first selects the best
relay from a set of M available relays and then uses this best relay for
cooperation between the source and the destination. We develop and analyze a
distributed method to select the best relay that requires no topology
information and is based on local measurements of the instantaneous channel
conditions. This method also requires no explicit communication among the
relays. The success (or failure) to select the best available path depends on
the statistics of the wireless channel, and a methodology to evaluate
performance for any kind of wireless channel statistics, is provided.
Information theoretic analysis of outage probability shows that our scheme
achieves the same diversity-multiplexing tradeoff as achieved by more complex
protocols, where coordination and distributed space-time coding for M nodes is
required, such as those proposed in [7]. The simplicity of the technique,
allows for immediate implementation in existing radio hardware and its adoption
could provide for improved flexibility, reliability and efficiency in future 4G
wireless systems.Comment: To appear, IEEE JSAC, special issue on 4
A virtual MIMO dual-hop architecture based on hybrid spatial modulation
International audienceIn this paper, we propose a novel Virtual Multiple-Input-Multiple-Output (VMIMO) architecture based on the concept of Spatial Modulation (SM). Using a dual-hop and Decode-and-Forward protocol, we form a distributed system, called Dual-Hop Hybrid SM (DH-HSM). DH-HSM conveys information from a Source Node (SN) to a Destination Node (DN) via multiple Relay Nodes (RNs). The spatial position of the RNs is exploited for transferring information in addition to, or even without, a conventional symbol. In order to increase the performance of our architecture, while keeping the complexity of the RNs and DN low, we employ linear precoding using Channel State Information (CSI) at the SN. In this way, we form a Receive-Spatial Modulation (R-SM) pattern from the SN to the RNs, which is able to employ a centralized coordinated or a distributed uncoordinated detection algorithm at the RNs. In addition, we focus on the SN and propose two regularized linear precoding methods that employ realistic Imperfect Channel State Information at the Transmitter. The power of each precoder is analyzed theoretically. Using the Bit Error Rate (BER) metric, we evaluate our architecture against the following benchmark systems: 1) single relay; 2) best relay selection; 3) distributed Space Time Block Coding (STBC) VMIMO scheme; and 4) the direct communication link. We show that DH-HSM is able to achieve significant Signal-to-Noise Ratio (SNR) gains, which can be as high as 10.5 dB for a very large scale system setup. In order to verify our simulation results, we provide an analytical framework for the evaluation of the Average Bit Error Probability (ABEP)
Wireless transmission protocols using relays for broadcast and information exchange channels
Relays have been used to overcome existing network performance bottlenecks in meeting the growing
demand for large bandwidth and high quality of service (QoS) in wireless networks. This thesis
proposes several wireless transmission protocols using relays in practical multi-user broadcast and
information exchange channels. The main theme is to demonstrate that efficient use of relays provides
an additional dimension to improve reliability, throughput, power efficiency and secrecy. First,
a spectrally efficient cooperative transmission protocol is proposed for the multiple-input and singleoutput
(MISO) broadcast channel to improve the reliability of wireless transmission. The proposed
protocol mitigates co-channel interference and provides another dimension to improve the diversity
gain. Analytical and simulation results show that outage probability and the diversity and multiplexing
tradeoff of the proposed cooperative protocol outperforms the non-cooperative scheme. Second,
a two-way relaying protocol is proposed for the multi-pair, two-way relaying channel to improve the
throughput and reliability. The proposed protocol enables both the users and the relay to participate
in interference cancellation. Several beamforming schemes are proposed for the multi-antenna
relay. Analytical and simulation results reveal that the proposed protocol delivers significant improvements
in ergodic capacity, outage probability and the diversity and multiplexing tradeoff if compared
to existing schemes. Third, a joint beamforming and power management scheme is proposed for
multiple-input and multiple-output (MIMO) two-way relaying channel to improve the sum-rate. Network
power allocation and power control optimisation problems are formulated and solved using
convex optimisation techniques. Simulation results verify that the proposed scheme delivers better
sum-rate or consumes lower power when compared to existing schemes. Fourth, two-way secrecy
schemes which combine one-time pad and wiretap coding are proposed for the scalar broadcast channel
to improve secrecy rate. The proposed schemes utilise the channel reciprocity and employ relays
to forward secret messages. Analytical and simulation results reveal that the proposed schemes are
able to achieve positive secrecy rates even when the number of users is large. All of these new wireless
transmission protocols help to realise better throughput, reliability, power efficiency and secrecy
for wireless broadcast and information exchange channels through the efficient use of relays
Performance analysis of diversity techniques in wireless communication systems: Cooperative systems with CCI and MIMO-OFDM systems
This Dissertation analyzes the performance of ecient digital commu- nication systems, the performance analysis includes the bit error rate (BER) of dier- ent binary and M-ary modulation schemes, and the average channel capacity (ACC) under dierent adaptive transmission protocols, namely, the simultaneous power and rate adaptation protocol (OPRA), the optimal rate with xed power protocol (ORA), the channel inversion with xed rate protocol (CIFR), and the truncated channel in- version with xed transmit power protocol (CTIFR). In this dissertation, BER and ACC performance of interference-limited dual-hop decode-and-forward (DF) relay- ing cooperative systems with co-channel interference (CCI) at both the relay and destination nodes is analyzed in small-scale multipath Nakagami-m fading channels with arbitrary (integer as well as non-integer) values of m. This channel condition is assumed for both the desired signal as well as co-channel interfering signals. In addition, the practical case of unequal average fading powers between the two hops is assumed in the analysis. The analysis assumes an arbitrary number of indepen- dent and non-identically distributed (i.n.i.d.) interfering signals at both relay (R) and destination (D) nodes. Also, the work extended to the case when the receiver employs the maximum ratio combining (MRC) and the equal gain combining (EGC) schemes to exploit the diversity gain
- …