Motor Energy Management Based on Non-Intrusive Monitoring Technology and Wireless Sensor Networks

This paper proposes a motor energy management architecture, which is composed of a data acquisition platform, a condition monitoring platform, an energy consumption and saving analysis platform, a communication platform, and a motor energy data management platform. Under the guidance of the architecture, an in-service motor monitoring and energy management system is developed based on non intrusive monitoring technologies and wireless sensor networks. The system has two subsystems: a data acquiring and analysis subsystem, and a condition monitoring and energy management subsystem. To evaluate the in-service motor energy usage, motor efficiency estimation methods are discussed. And a motor monitoring front-end device is developed with the implement of the methods introduced. The device is designed as three separate units, including a sensing unit, a processing unit, and a communication unit. Such a flexible design could meet various requirements in the application. The wireless sensor network is a self-organized network with dynamic topology. As a lowcost, robust, and reliable communication network, it is used to connect the front-end devices with the central supervisory station. A WSN node is designed and implemented for the inservice motor monitoring system, which can also be used as a unit of the front-end device. The laboratory tests and plant application show that the system can help the plant managers to improve motor-driven systems

Remote machine condition monitoring based on power supply measurements

The most widely used rotating machines in the industry are three phase alternative current (AC) induction machines. With the advances in variable speed drive (VSD) technology, they have become even more reliable than their direct current (DC) counterpart. However, inevitably these motors soon begin to fail with time due to mechanical, electrical or thermal stress hence the need for condition monitoring (CM). Condition monitoring systems help keep machines running productively by detecting potential equipment failures before it actually fails. Many condition monitoring methods exist on the market including vibration monitoring; acoustic emission monitoring, thermal monitoring, chemical monitoring, current monitoring but most of these methods require additional sensors and expensive data acquisition system on top of a specialise software tool. This all increases the cost of ownership and maintenance. For more efficient monitoring of induction motor drive systems, this research investigates an innovative remote monitoring system using existing data available in AC drives based on AC motor operating process. This research uses standard automation components already present in most automated control systems. A remote data communication platform is developed, allowing access to the control data remotely over a wireless network and internet using PLC and SCADA system. Remote machine condition monitoring is not a new idea but its application to machine monitoring based on power supply parameters indirectly measured by an inverter is new. To evaluate the basic performance of the platform, the monitoring of shaft misalignment, a typical fault in mechanical system is investigated using an in-house gearbox test rig. It has resulted in a model based detection method based on different speed and load settings against the motor current feedback read by the inverter. The results have demonstrated that the platform is reliable and effective. In addition the monitoring method can be employed to detect and diagnose different degrees of misalignment in real time. This dissertation has major contributions to knowledge which includes: Understanding of real life machine condition monitoring problems for this application, including use of wireless sensor, communication over Industrial Ethernet and network security. The use of standard automation components (PLC and SCADA) in machine condition monitoring. MSc Research (Engineering) Thesis x An improved gearbox test rig platform which has the capability of remote control, acquiring and transferring data for monitoring induction machine drive system. The presented work shows that any machine using automated components such as PLC and SCADA and incorporating motor drive systems and other actuators has the potential to use the automated components for control, condition monitoring and reporting but this will require more tests to be done using the proposed platform

Energy Management

Forecasts point to a huge increase in energy demand over the next 25 years, with a direct and immediate impact on the exhaustion of fossil fuels, the increase in pollution levels and the global warming that will have significant consequences for all sectors of society. Irrespective of the likelihood of these predictions or what researchers in different scientific disciplines may believe or publicly say about how critical the energy situation may be on a world level, it is without doubt one of the great debates that has stirred up public interest in modern times. We should probably already be thinking about the design of a worldwide strategic plan for energy management across the planet. It would include measures to raise awareness, educate the different actors involved, develop policies, provide resources, prioritise actions and establish contingency plans. This process is complex and depends on political, social, economic and technological factors that are hard to take into account simultaneously. Then, before such a plan is formulated, studies such as those described in this book can serve to illustrate what Information and Communication Technologies have to offer in this sphere and, with luck, to create a reference to encourage investigators in the pursuit of new and better solutions

The use of passive telemetry in rotor fault diagnosis

The sensors most commonly used for monitoring machine health are wired accelerometers because of their high performances and good stability. However, these transducers are usually large in size; require an external power source. Hence, there is a need for cheaper and reliable alternative for the conventional accelerometers. This thesis reports the development of a wireless accelerometer based on Micro-Electro-Mechanical System (MEMS) inertial sensor and off-the-shelf digital RF communication modules. It is small enough to be installed on the rotating shaft of a machine. In addition, it has a high enough resolution to be used to analyse the dynamic behaviour of rotating shaft. The wireless sensor is mounted with its sensitive axis in the tangential direction with respect to the centre of the rotor. This position allows the sensor to perform high resolution tangential acceleration measurements and nullifies the centripetal acceleration. To assist in the validation of the wireless sensor, a mathematical model was derived to simulate the vibration signals from the test rig. Experimental and simulated results both confirmed the effectiveness of the wireless sensor in detecting different degrees of misalignments and unbalance of a flexible rotor system. The wireless sensor has been confirmed to possess the capability of detecting small degrees of misalignment using the spectral amplitude of the peak at 2X running speed compared to other conventional sensors (wired accelerometers, laser vibrometers). In addition, the results of the experiment and simulation have also confirmed the capacity of the wireless sensor to detect different shaft unbalance grades at 1X running speed using spectral and order magnitudes. However, the wired sensors used for comparison failed to show any clear separation of the different grades of shaft unbalance. Moreover, it has been observed that the instantaneous angular speed (IAS) derived directly from the wireless sensor correlates well with that obtained from a shaft encoder and showed the capacity to detect the main features of rotor dynamics. An advanced algorithm has been developed to remove the gravity effect. The application of the algorithm has made the IAS computed from the wireless sensor more indicative to that obtained by a shaft encoder

Fault detection and diagnosis of a multistage helical gearbox using magnitude and phase information from vibration signals

Vibration generated by a gearbox carries a great deal of information regarding its health condition. This research aims primarily on the detection and diagnosis of tooth defects in a multistage gearbox based on advanced vibration analysis. Time synchronised averaging (TSA) analysis is effective at removing noise but it is inefficient in implementation and in diagnosing different types of faults such as bearing defects other than gears. Conventional bispectrum (CB) can eliminate Gaussian noise while it preserves the signal’s phase information, however its overpopulated contents can still provide inaccurate information regarding to different types of gear faults. Recently developed modulation signal bispectrum (MSB) has the high potential to lead to the high accuracy of diagnostics of gearboxes as it more effectively characterises modulation signals such as gearbox vibrations. Therefore, the research takes MSB as the fundamental tool for analysing gearbox vibration signals and developing accurate diagnostic techniques. Firstly, it has realised that conventional techniques often ignore the effect of phase information in gearbox diagnostics. This thesis then focuses on developing CB and MSB based techniques for detecting and diagnosing of gearbox faults. Secondly, it has found that vibration responses from a multiple stage gearbox have high interferences between amplitude modulation (AM) and phase modulation (PM) which can be formalised from both gear faults and inherent manufacturing errors. However, the faults can induce wider bandwidth vibrations. Correspondingly, optimal component based schemes are also developed based on the use of MSB coherence results. Then the proposed MSB method allows an effective gearbox diagnosis using the signals in a narrower frequency band that is below twice the rotational frequency plus the highest meshing frequency amongst different gear transmission stages, being more suitable for wireless network condition monitoring systems. It has also found that the signals at resonance frequencies has a higher signal-to-noise ratio and more effective for obtaining accurate diagnosis. Also software encoder based TSA was found to be not robust and accurate due to the influences of noise and referencing components on obtaining a reliable phase signal for implementing TSA. Finally, the diagnostics carried out upon different fault cases using both CB and MSB have verified the proposed approaches can provide accurate diagnostic results, and with the new MSB based detector and estimator being more effective in differentiating between diffident fault locations for two local and one non-uniformly distributed tooth damages in a two stage helical gearbox

ReSCon '09, Research Student Conference: Book of Abstracts

The second SED Research Student Conference (ReSCon2009) was hosted over three days, 22-24 June 2009, in the Lecture Centre at Brunel University. The conference consisted of technical presentations, a poster session and social events. The abstracts and presentations were the result of ongoing research by postgraduate research students from the School of Engineering and Design at Brunel University. The conference is held annually, and ReSCon plays a key role in contributing to research and innovations within the School

Design of an intelligent embedded system for condition monitoring of an industrial robot

PhD ThesisIndustrial robots have long been used in production systems in order to improve productivity, quality and safety in automated manufacturing processes. There are significant implications for operator safety in the event of a robot malfunction or failure, and an unforeseen robot stoppage, due to different reasons, has the potential to cause an interruption in the entire production line, resulting in economic and production losses. Condition monitoring (CM) is a type of maintenance inspection technique by which an operational asset is monitored and the data obtained is analysed to detect signs of degradation, diagnose the causes of faults and thus reduce maintenance costs. So, the main focus of this research is to design and develop an online, intelligent CM system based on wireless embedded technology to detect and diagnose the most common faults in the transmission systems (gears and bearings) of the industrial robot joints using vibration signal analysis. To this end an old, but operational, PUMA 560 robot was utilized to synthesize a number of different transmission faults in one of the joints (3 - elbow), such as backlash between the gear pair, gear tooth and bearing faults. A two-stage condition monitoring algorithm is proposed for robot health assessment, incorporating fault detection and fault diagnosis. Signal processing techniques play a significant role in building any condition monitoring system, in order to determine fault-symptom relationships, and detect abnormalities in robot health. Fault detection stage is based on time-domain signal analysis and a statistical control chart (SCC) technique. For accurate fault diagnosis in the second stage, a novel implementation of a time-frequency signal analysis technique based on the discrete wavelet transform (DWT) is adopted. In this technique, vibration signals are decomposed into eight levels of wavelet coefficients and statistical features, such as standard deviation, kurtosis and skewness, are obtained at each level and analysed to extract the most salient feature related to faults; the artificial neural network (ANN) is then used for fault classification. A data acquisition system based on National Instruments (NI) software and hardware was initially developed for preliminary robot vibration analysis and feature extraction. The transmission faults induced in the robot can change the captured vibration spectra, and the robot’s natural frequencies were established using experimental modal analysis, and also the fundamental fault frequencies for the gear transmission and bearings were obtained and utilized for preliminary robot condition monitoring. In addition to simulation of different levels of backlash fault, gear tooth and bearing faults which have not been previously investigated in industrial robots, with several levels of ii severity, were successfully simulated and detected in the robot’s joint transmission. The vibration features extracted, which are related to the robot healthy state and different fault types, using the data acquisition system were subsequently used in building the SCC and ANN, which were trained using part of the measured data set that represents the robot operating range. Another set of data, not used within the training stage, was then utilized for validation. The results indicate the successful detection and diagnosis of faults using the key extracted parameters. A wireless embedded system based on the ZigBee communication protocol was designed for the application of the proposed CM algorithm in real-time, using an Arduino DUE as the core of the wireless sensor unit attached on the robot arm. A Texas Instruments digital signal processor (TMS320C6713 DSK board) was used as the base station of the wireless system on which the robot’s fault diagnosis algorithm is run. To implement the two stages of the proposed CM algorithm on the designed embedded system, software based on the C programming language has been developed. To demonstrate the reliability of the designed wireless CM system, experimental validations were performed, and high reliability was shown in the detection and diagnosis of several seeded faults in the robot. Optimistically, the established wireless embedded system could be envisaged for fault detection and diagnostics on any type of rotating machine, with the monitoring system realized using vibration signal analysis. Furthermore, with some modifications to the system’s hardware and software, different CM techniques such as acoustic emission (AE) analysis or motor current signature analysis (MCSA), can be applied.Iraqi government, represented by the Ministry of Higher Education and Scientific Research, the Iraqi Cultural Attaché in London, and the University of Technology in Baghda

30th International Conference on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2017)

Proceedings of COMADEM 201

Advances in Intelligent Robotics and Collaborative Automation

This book provides an overview of a series of advanced research lines in robotics as well as of design and development methodologies for intelligent robots and their intelligent components. It represents a selection of extended versions of the best papers presented at the Seventh IEEE International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications IDAACS 2013 that were related to these topics. Its contents integrate state of the art computational intelligence based techniques for automatic robot control to novel distributed sensing and data integration methodologies that can be applied to intelligent robotics and automation systems. The objective of the text was to provide an overview of some of the problems in the field of robotic systems and intelligent automation and the approaches and techniques that relevant research groups within this area are employing to try to solve them.The contributions of the different authors have been grouped into four main sections:• Robots• Control and Intelligence• Sensing• Collaborative automationThe chapters have been structured to provide an easy to follow introduction to the topics that are addressed, including the most relevant references, so that anyone interested in this field can get started in the area