Non-intrusive on-the-fly data race detection using execution replay

This paper presents a practical solution for detecting data races in parallel programs. The solution consists of a combination of execution replay (RecPlay) with automatic on-the-fly data race detection. This combination enables us to perform the data race detection on an unaltered execution (almost no probe effect). Furthermore, the usage of multilevel bitmaps and snooped matrix clocks limits the amount of memory used. As the record phase of RecPlay is highly efficient, there is no need to switch it off, hereby eliminating the possibility of Heisenbugs because tracing can be left on all the time.Comment: In M. Ducasse (ed), proceedings of the Fourth International Workshop on Automated Debugging (AAdebug 2000), August 2000, Munich. cs.SE/001003

The Case for Execution Replay using a Virtual Machine

International audienceDebugging grid systems is complex, mainly because of the probe effect and non reproducible execution. The probe effect arises when an attempt to monitor a system changes the behavior of that system. Moreover, two executions of a distributed system with identical inputs may behave differ- ently due to non determinism. Execution replay is a tech- nique developed to facilitate the debugging of distributed systems: a debugger first monitors the execution of a dis- tributed system and then replays it identically. Existing approaches to execution replay only partially address the probe effect and irreproducibility problem. In this paper, we argue for execution replay of distributed sys- tems using a virtual machine approach. The VM approach addresses the irreproducibility problem, it does not com- pletely avoid the probe effect. Nevertheless, we believe that the full control of the virtual hardware addresses the probe issue well enough to debug distributed system errors

Dynamic Analysis of Embedded Software

abstract: Most embedded applications are constructed with multiple threads to handle concurrent events. For optimization and debugging of the programs, dynamic program analysis is widely used to collect execution information while the program is running. Unfortunately, the non-deterministic behavior of multithreaded embedded software makes the dynamic analysis difficult. In addition, instrumentation overhead for gathering execution information may change the execution of a program, and lead to distorted analysis results, i.e., probe effect. This thesis presents a framework that tackles the non-determinism and probe effect incurred in dynamic analysis of embedded software. The thesis largely consists of three parts. First of all, we discusses a deterministic replay framework to provide reproducible execution. Once a program execution is recorded, software instrumentation can be safely applied during replay without probe effect. Second, a discussion of probe effect is presented and a simulation-based analysis is proposed to detect execution changes of a program caused by instrumentation overhead. The simulation-based analysis examines if the recording instrumentation changes the original program execution. Lastly, the thesis discusses data race detection algorithms that help to remove data races for correctness of the replay and the simulation-based analysis. The focus is to make the detection efficient for C/C++ programs, and to increase scalability of the detection on multi-core machines.Dissertation/ThesisDoctoral Dissertation Computer Science 201

MPSoC Zoom Debugging: A Deterministic Record-Partial Replay Approach

Accepté à EUC'2014International audienceThis work presents a debugging methodology for MPSoC based on deterministic record-replay. We propose a general model of MPSoC and define a debugging cycle targeting errors by applying temporal and spatial selection criteria. The idea behind spatial and temporal selection is to consider not the entire execution of the whole application but replay a part of the application during a specific execution interval. The proposed mechanisms are connected to GDB and allow for a visual representation of the considered part of the trace. The approach is validated on two execution platforms and two multimedia applications

Secure and efficient application monitoring and replication

Memory corruption vulnerabilities remain a grave threat to systems software written in C/C++. Current best practices dictate compiling programs with exploit mitigations such as stack canaries, address space layout randomization, and control-flow integrity. However, adversaries quickly find ways to circumvent such mitigations, sometimes even before these mitigations are widely deployed. In this paper, we focus on an "orthogonal" defense that amplifies the effectiveness of traditional exploit mitigations. The key idea is to create multiple diversified replicas of a vulnerable program and then execute these replicas in lockstep on identical inputs while simultaneously monitoring their behavior. A malicious input that causes the diversified replicas to diverge in their behavior will be detected by the monitor; this allows discovery of previously unknown attacks such as zero-day exploits. So far, such multi-variant execution environments (MVEEs) have been held back by substantial runtime overheads. This paper presents a new design, ReMon, that is non-intrusive, secure, and highly efficient. Whereas previous schemes either monitor every system call or none at all, our system enforces cross-checking only for security critical system calls while supporting more relaxed monitoring policies for system calls that are not security critical. We achieve this by splitting the monitoring and replication logic into an in-process component and a cross-process component. Our evaluation shows that ReMon offers same level of security as conservative MVEEs and run realistic server benchmarks at near-native speeds

Automated Debugging Methodology for FPGA-based Systems

Electronic devices make up a vital part of our lives. These are seen from mobiles, laptops, computers, home automation, etc. to name a few. The modern designs constitute billions of transistors. However, with this evolution, ensuring that the devices fulfill the designer’s expectation under variable conditions has also become a great challenge. This requires a lot of design time and effort. Whenever an error is encountered, the process is re-started. Hence, it is desired to minimize the number of spins required to achieve an error-free product, as each spin results in loss of time and effort. Software-based simulation systems present the main technique to ensure the verification of the design before fabrication. However, few design errors (bugs) are likely to escape the simulation process. Such bugs subsequently appear during the post-silicon phase. Finding such bugs is time-consuming due to inherent invisibility of the hardware. Instead of software simulation of the design in the pre-silicon phase, post-silicon techniques permit the designers to verify the functionality through the physical implementations of the design. The main benefit of the methodology is that the implemented design in the post-silicon phase runs many order-of-magnitude faster than its counterpart in pre-silicon. This allows the designers to validate their design more exhaustively. This thesis presents five main contributions to enable a fast and automated debugging solution for reconfigurable hardware. During the research work, we used an obstacle avoidance system for robotic vehicles as a use case to illustrate how to apply the proposed debugging solution in practical environments. The first contribution presents a debugging system capable of providing a lossless trace of debugging data which permits a cycle-accurate replay. This methodology ensures capturing permanent as well as intermittent errors in the implemented design. The contribution also describes a solution to enhance hardware observability. It is proposed to utilize processor-configurable concentration networks, employ debug data compression to transmit the data more efficiently, and partially reconfiguring the debugging system at run-time to save the time required for design re-compilation as well as preserve the timing closure. The second contribution presents a solution for communication-centric designs. Furthermore, solutions for designs with multi-clock domains are also discussed. The third contribution presents a priority-based signal selection methodology to identify the signals which can be more helpful during the debugging process. A connectivity generation tool is also presented which can map the identified signals to the debugging system. The fourth contribution presents an automated error detection solution which can help in capturing the permanent as well as intermittent errors without continuous monitoring of debugging data. The proposed solution works for designs even in the absence of golden reference. The fifth contribution proposes to use artificial intelligence for post-silicon debugging. We presented a novel idea of using a recurrent neural network for debugging when a golden reference is present for training the network. Furthermore, the idea was also extended to designs where golden reference is not present

MPSoC Zoom Debugging: A Deterministic Record-Partial Replay Approach

Accepté à EUC'2014International audienceThis work presents a debugging methodology for MPSoC based on deterministic record-replay. We propose a general model of MPSoC and define a debugging cycle targeting errors by applying temporal and spatial selection criteria. The idea behind spatial and temporal selection is to consider not the entire execution of the whole application but replay a part of the application during a specific execution interval. The proposed mechanisms are connected to GDB and allow for a visual representation of the considered part of the trace. The approach is validated on two execution platforms and two multimedia applications

Doctor of Philosophy

dissertationMessage passing (MP) has gained a widespread adoption over the years, so much so, that even heterogeneous embedded multicore systems are running programs that are developed using message passing libraries. Such a phenomenon is a shift in computing practices, since, traditionally MP programs have been developed specifically for high performance computing. With growing importance and the complexity of MP programs in today's times, it becomes absolutely imperative to have formal tools and sound methodologies that can help reason about the correctness of the program. It has been demonstrated by many researchers in the area of concurrent program verification that a suitable strategy to verify programs which rely heavily on nondeterminism, is dynamic verification. Dynamic verification integrates the best features of testing and model checking. In the area of MP program verification, however, there have been only a handful of dynamic verifiers. These dynamic verifiers, despite their strengths, suffer from the explosion in execution scenarios. All existing dynamic verifiers, to our knowledge, exhaustively explore the nondeterministic choices in an MP program. It is apparent that an MP program with many nondeterministic constructs will quickly inundate such tools. This dissertation focuses on the problem of containing the exponential space of execution scenarios (or interleavings) while providing a soundness and completeness guarantee over safety properties of MP programs (specifically deadlocks). We present a predictive verification methodology and an associated framework, called MAAPED(Messaging Application Analysis with Predictive Error Discovery), that operates in polynomial time over MP programs to detect deadlocks among other safety property violations. In brief, we collect a single execution trace of an MP program and without re-running other execution schedules, reliably construct the artifacts necessary to predict any mishappening in an unexplored execution schedule with the aforementioned formal guarantee. The main contributions of the thesis are the following: The Functionally Irrelevant Barrier Algorithm to increase program productivity and ease in verification complexity. A sound pragmatic strategy to reduce the interleaving space of existing dynamic verifiers which is complete only for a certain class of MPI programs. A generalized matches-before ordering for MP programs. A predictive polynomial time verification framework as an alternate solution in the dynamic MP verification landscape. A soundness and completeness proof for the predictive framework's deadlock detection strategy for many formally characterized classes of MP programs. In the process of developing solutions that are mentioned above, we also collected important experiences relating to the development of dynamic verification schedulers. We present those experiences as a minor contribution of this thesis