Multi-core devices for safety-critical systems: a survey

Multi-core devices are envisioned to support the development of next-generation safety-critical systems, enabling the on-chip integration of functions of different criticality. This integration provides multiple system-level potential benefits such as cost, size, power, and weight reduction. However, safety certification becomes a challenge and several fundamental safety technical requirements must be addressed, such as temporal and spatial independence, reliability, and diagnostic coverage. This survey provides a categorization and overview at different device abstraction levels (nanoscale, component, and device) of selected key research contributions that support the compliance with these fundamental safety requirements.This work has been partially supported by the Spanish Ministry of Economy and Competitiveness under grant TIN2015-65316-P, Basque Government under grant KK-2019-00035 and the HiPEAC Network of Excellence. The Spanish Ministry of Economy and Competitiveness has also partially supported Jaume Abella under Ramon y Cajal postdoctoral fellowship (RYC-2013-14717).Peer ReviewedPostprint (author's final draft

On the tailoring of CAST-32A certification guidance to real COTS multicore architectures

The use of Commercial Off-The-Shelf (COTS) multicores in real-time industry is on the rise due to multicores' potential performance increase and energy reduction. Yet, the unpredictable impact on timing of contention in shared hardware resources challenges certification. Furthermore, most safety certification standards target single-core architectures and do not provide explicit guidance for multicore processors. Recently, however, CAST-32A has been presented providing guidance for software planning, development and verification in multicores. In this paper, from a theoretical level, we provide a detailed review of CAST-32A objectives and the difficulty of reaching them under current COTS multicore design trends; at experimental level, we assess the difficulties of the application of CAST-32A to a real multicore processor, the NXP P4080.This work has been partially supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under grant TIN2015-65316-P and the HiPEAC Network of Excellence. Jaume Abella has been partially supported by the MINECO under Ramon y Cajal grant RYC-2013-14717.Peer ReviewedPostprint (author's final draft

Mixed-Criticality Systems on Commercial-Off-the-Shelf Multi-Processor Systems-on-Chip

Avionics and space industries are struggling with the adoption of technologies like multi-processor system-on-chips (MPSoCs) due to strict safety requirements. This thesis propose a new reference architecture for MPSoC-based mixed-criticality systems (MCS) - i.e., systems integrating applications with different level of criticality - which are a common use case for aforementioned industries. This thesis proposes a system architecture capable of granting partitioning - which is, for short, the property of fault containment. It is based on the detection of spatial and temporal interference, and has been named the online detection of interference (ODIn) architecture. Spatial partitioning requires that an application is not able to corrupt resources used by a different application. In the architecture proposed in this thesis, spatial partitioning is implemented using type-1 hypervisors, which allow definition of resource partitions. An application running in a partition can only access resources granted to that partition, therefore it cannot corrupt resources used by applications running in other partitions. Temporal partitioning requires that an application is not able to unexpectedly change the execution time of other applications. In the proposed architecture, temporal partitioning has been solved using a bounded interference approach, composed of an offline analysis phase and an online safety net. The offline phase is based on a statistical profiling of a metric sensitive to temporal interference’s, performed in nominal conditions, which allows definition of a set of three thresholds: 1. the detection threshold TD; 2. the warning threshold TW ; 3. the α threshold. Two rules of detection are defined using such thresholds: Alarm rule When the value of the metric is above TD. Warning rule When the value of the metric is in the warning region [TW ;TD] for more than α consecutive times. ODIn’s online safety-net exploits performance counters, available in many MPSoC architectures; such counters are configured at bootstrap to monitor the selected metric(s), and to raise an interrupt request (IRQ) in case the metric value goes above TD, implementing the alarm rule. The warning rule is implemented in a software detection module, which reads the value of performance counters when the monitored task yields control to the scheduler and reset them if there is no detection. ODIn also uses two additional detection mechanisms: 1. a control flow check technique, based on compile-time defined block signatures, is implemented through a set of watchdog processors, each monitoring one partition. 2. a timeout is implemented through a system watchdog timer (SWDT), which is able to send an external signal when the timeout is violated. The recovery actions implemented in ODIn are: • graceful degradation, to react to IRQs of WDPs monitoring non-critical applications or to warning rule violations; it temporarily stops non-critical applications to grant resources to the critical application; • hard recovery, to react to the SWDT, to the WDP of the critical application, or to alarm rule violations; it causes a switch to a hot stand-by spare computer. Experimental validation of ODIn was performed on two hardware platforms: the ZedBoard - dual-core - and the Inventami board - quad-core. A space benchmark and an avionic benchmark were implemented on both platforms, composed by different modules as showed in Table 1 Each version of the final application was evaluated through fault injection (FI) campaigns, performed using a specifically designed FI system. There were three types of FI campaigns: 1. HW FI, to emulate single event effects; 2. SW FI, to emulate bugs in non-critical applications; 3. artificial bug FI, to emulate a bug in non-critical applications introducing unexpected interference on the critical application. Experimental results show that ODIn is resilient to all considered types of faul

Development and certification of mixed-criticality embedded systems based on probabilistic timing analysis

An increasing variety of emerging systems relentlessly replaces or augments the functionality of mechanical subsystems with embedded electronics. For quantity, complexity, and use, the safety of such subsystems is an increasingly important matter. Accordingly, those systems are subject to safety certification to demonstrate system's safety by rigorous development processes and hardware/software constraints. The massive augment in embedded processors' complexity renders the arduous certification task significantly harder to achieve. The focus of this thesis is to address the certification challenges in multicore architectures: despite their potential to integrate several applications on a single platform, their inherent complexity imperils their timing predictability and certification. Recently, the Measurement-Based Probabilistic Timing Analysis (MBPTA) technique emerged as an alternative to deal with hardware/software complexity. The innovation that MBPTA brings about is, however, a major step from current certification procedures and standards. The particular contributions of this Thesis include: (i) the definition of certification arguments for mixed-criticality integration upon multicore processors. In particular we propose a set of safety mechanisms and procedures as required to comply with functional safety standards. For timing predictability, (ii) we present a quantitative approach to assess the likelihood of execution-time exceedance events with respect to the risk reduction requirements on safety standards. To this end, we build upon the MBPTA approach and we present the design of a safety-related source of randomization (SoR), that plays a key role in the platform-level randomization needed by MBPTA. And (iii) we evaluate current certification guidance with respect to emerging high performance design trends like caches. Overall, this Thesis pushes the certification limits in the use of multicore and MBPTA technology in Critical Real-Time Embedded Systems (CRTES) and paves the way towards their adoption in industry.Una creciente variedad de sistemas emergentes reemplazan o aumentan la funcionalidad de subsistemas mecánicos con componentes electrónicos embebidos. El aumento en la cantidad y complejidad de dichos subsistemas electrónicos así como su cometido, hacen de su seguridad una cuestión de creciente importancia. Tanto es así que la comercialización de estos sistemas críticos está sujeta a rigurosos procesos de certificación donde se garantiza la seguridad del sistema mediante estrictas restricciones en el proceso de desarrollo y diseño de su hardware y software. Esta tesis trata de abordar los nuevos retos y dificultades dadas por la introducción de procesadores multi-núcleo en dichos sistemas críticos: aunque su mayor rendimiento despierta el interés de la industria para integrar múltiples aplicaciones en una sola plataforma, suponen una mayor complejidad. Su arquitectura desafía su análisis temporal mediante los métodos tradicionales y, asimismo, su certificación es cada vez más compleja y costosa. Con el fin de lidiar con estas limitaciones, recientemente se ha desarrollado una novedosa técnica de análisis temporal probabilístico basado en medidas (MBPTA). La innovación de esta técnica, sin embargo, supone un gran cambio cultural respecto a los estándares y procedimientos tradicionales de certificación. En esta línea, las contribuciones de esta tesis están agrupadas en tres ejes principales: (i) definición de argumentos de seguridad para la certificación de aplicaciones de criticidad-mixta sobre plataformas multi-núcleo. Se definen, en particular, mecanismos de seguridad, técnicas de diagnóstico y reacción de faltas acorde con el estándar IEC 61508 sobre una arquitectura multi-núcleo de referencia. Respecto al análisis temporal, (ii) presentamos la cuantificación de la probabilidad de exceder un límite temporal y su relación con los requisitos de reducción de riesgos derivados de los estándares de seguridad funcional. Con este fin, nos basamos en la técnica MBPTA y presentamos el diseño de una fuente de números aleatorios segura; un componente clave para conseguir las propiedades aleatorias requeridas por MBPTA a nivel de plataforma. Por último, (iii) extrapolamos las guías actuales para la certificación de arquitecturas multi-núcleo a una solución comercial de 8 núcleos y las evaluamos con respecto a las tendencias emergentes de diseño de alto rendimiento (caches). Con estas contribuciones, esta tesis trata de abordar los retos que el uso de procesadores multi-núcleo y MBPTA implican en el proceso de certificación de sistemas críticos de tiempo real y facilita, de esta forma, su adopción por la industria.Postprint (published version

The CONCERTO methodology for model-based development of avionics SW

20th International Conference on Reliable Software Technologies - Ada-Europe 2015 (Ada-Europe 2015), 22 to 26, Jun, 2015, Madrid, Spain.The development of high-integrity real-time systems, including their certification, is a demanding endeavour in terms of time, skills and effort involved. This is particularly true in application domains such as the avionics, where composable design is to be had to allow subdividing monolithic systems into components of smaller complexity, to be outsourced to developers subcontracted down the supply chain. Moreover, the increasing demand for computational power and the consequent interest in multicore HW architectures complicates system deployment. For these reasons, appropriate methodologies and tools need to be devised to help the industrial stakeholders master the overall system design complexity, while keeping manufacturing costs affordable. In this paper we present some elements of the CONCERTO platform, a toolset to support the end-to-end system development process from system modelling to analysis and validation, prior to code generation and deployment. The approach taken by CONCERTO is demonstrated for an illustrative avionics setup, however it is general enough to be applied to a number of industrial domains including the space, telecom and automotive. We finally reason about the benefits to an industrial user by comparing to similar initiatives in the research landscape

Network-on-Chip -based Multi-Processor System-on-Chip: Towards Mixed-Criticality System Certification

L'abstract è presente nell'allegato / the abstract is in the attachmen