183 research outputs found
Non Data Aided Parameter Estimation for Multi-User ARGOS Receivers
In this paper, parameter estimators are analyzed in
the context of Successive Interference Cancelation (SIC) receivers for the ARGOS system. A Non Data Aided (NDA) feed forward estimator is proposed for the amplitude and the carrier phase parameters. Time delays are assumed to be known. A Window Accumulator (WA) is used to reduce the influence of the additive noise. In the presence of frequency offset, the window length L cannot be chosen arbitrarily large but an optimal length Lopt can be determined. However, because the estimator induces a different optimal length for each parameter, a trade-off must be made. We show that a window length of around 35 samples induces mean square errors (MSEs) lower than 0.012 for both parameters. The MSE of the proposed estimator is also compared to the Modified Cram´er Rao Bound (MCRB)
Recommended from our members
Analysis of millimeter wave and massive MIMO cellular networks
Millimeter wave (mmWave) communication and massive multiple-input multiple-output (MIMO) are promising techniques to increase system capacity in 5G cellular networks. The prior frameworks for conventional cellular systems do not directly apply to analyze mmWave or massive MIMO networks, as (i) mmWave cellular networks differ in the different propagation conditions and hardware constraints; and (ii) with a order of magnitude more antennas than conventional multi-user MIMO systems, massive MIMO systems will be operated in time-division duplex (TDD) mode, which renders pilot contamination a primary limiting factor. In this dissertation, I develop stochastic geometry frameworks to analyze the system-level performance of mmWave, sub-6 GHz massive MIMO, and mmWave massive MIMO cellular networks. The proposed models capture the key features of each technique, and allow for tractable signal-to-interference-plus-noise ratio (SINR) and rate analyses. In the first contribution, I develop an mmWave cellular network model that incorporates the blockage effect and directional beamforming, and analyze the SINR and rate distributions as functions of the base station density, blockage parameters, and antenna geometry. The analytical results demonstrate that with a sufficiently dense base station deployment, mmWave cellular networks are capable to achieve comparable SINR coverage and much higher rates than conventional networks. In my second contribution, I analyze the uplink SINR and rate in sub-6 GHz massive MIMO networks with the incorporation of pilot contamination and fractional power control. Based on the analysis, I show scaling laws between the number of antennas and scheduled users per cell that maintain the uplink signal-to-interference ratio (SIR) distributions are different for maximum ratio combining (MRC) and zero-forcing (ZF) receivers. In my third contribution, I extend the sub-6 GHz massive MIMO model to mmWave frequencies, by incorporating key mmWave features. I leverage the proposed model to investigate the asymptotic SINR performance, when the number of antennas goes to infinity. Numerical results show that mmWave massive MIMO outperforms its sub-6 GHz counterpart in cell throughput with a dense base station deployment, while the reverse can be true with a low base station density.Electrical and Computer Engineerin
On a wildlife tracking and telemetry system : a wireless network approach
Includes abstract.Includes bibliographical references (p. 239-261).Motivated by the diversity of animals, a hybrid wildlife tracking system, EcoLocate, is proposed, with lightweight VHF-like tags and high performance GPS enabled tags, bound by a common wireless network design. Tags transfer information amongst one another in a multi-hop store-and-forward fashion, and can also monitor the presence of one another, enabling social behaviour studies to be conducted. Information can be gathered from any sensor variable of interest (such as temperature, water level, activity and so on) and forwarded through the network, thus leading to more effective game reserve monitoring. Six classes of tracking tags are presented, varying in weight and functionality, but derived from a common set of code, which facilitates modular tag design and deployment. The link between the tags means that tags can dynamically choose their class based on their remaining energy, prolonging lifetime in the network at the cost of a reduction in function. Lightweight, low functionality tags (that can be placed on small animals) use the capabilities of heavier, high functionality devices (placed on larger animals) to transfer their information. EcoLocate is a modular approach to animal tracking and sensing and it is shown how the same common technology can be used for diverse studies, from simple VHF-like activity research to full social and behavioural research using wireless networks to relay data to the end user. The network is not restricted to only tracking animals – environmental variables, people and vehicles can all be monitored, allowing for rich wildlife tracking studies
Architectures and synchronization techniques for distributed satellite systems: a survey
Cohesive Distributed Satellite Systems (CDSSs) is a key enabling technology for the future of remote sensing and communication missions. However, they have to meet strict synchronization requirements before their use is generalized. When clock or local oscillator signals are generated locally at each of the distributed nodes, achieving exact synchronization in absolute phase, frequency, and time is a complex problem. In addition, satellite systems have significant resource constraints, especially for small satellites, which are envisioned to be part of the future CDSSs. Thus, the development of precise, robust, and resource-efficient synchronization techniques is essential for the advancement of future CDSSs. In this context, this survey aims to summarize and categorize the most relevant results on synchronization techniques for Distributed Satellite Systems (DSSs). First, some important architecture and system concepts are defined. Then, the synchronization methods reported in the literature are reviewed and categorized. This article also provides an extensive list of applications and examples of synchronization techniques for DSSs in addition to the most significant advances in other operations closely related to synchronization, such as inter-satellite ranging and relative position. The survey also provides a discussion on emerging data-driven synchronization techniques based on Machine Learning (ML). Finally, a compilation of current research activities and potential research topics is proposed, identifying problems and open challenges that can be useful for researchers in the field.This work was supported by the Luxembourg National Research Fund (FNR), through the CORE Project COHEsive SATellite (COHESAT): Cognitive Cohesive Networks of Distributed Units for Active and Passive Space Applications, under Grant FNR11689919.Award-winningPostprint (published version
Performance characterization of a real-time massive MIMO system with LOS mobile channels
The first measured results for massive MIMO performance in a line-of-sight
(LOS) scenario with moderate mobility are presented, with 8 users served in
real-time using a 100-antenna base Station (BS) at 3.7 GHz. When such a large
number of channels dynamically change, the inherent propagation and processing
delay has a critical relationship with the rate of change, as the use of
outdated channel information can result in severe detection and precoding
inaccuracies. For the downlink (DL) in particular, a time division duplex (TDD)
configuration synonymous with massive multiple-input, multiple-output (MIMO)
deployments could mean only the uplink (UL) is usable in extreme cases.
Therefore, it is of great interest to investigate the impact of mobility on
massive MIMO performance and consider ways to combat the potential limitations.
In a mobile scenario with moving cars and pedestrians, the massive MIMO channel
is sampled across many points in space to build a picture of the overall user
orthogonality, and the impact of both azimuth and elevation array
configurations are considered. Temporal analysis is also conducted for vehicles
moving up to 29km/h and real-time bit error rates (BERs) for both the UL and DL
without power control are presented. For a 100-antenna system, it is found that
the channel state information (CSI) update rate requirement may increase by 7
times when compared to an 8-antenna system, whilst the power control update
rate could be decreased by at least 5 times relative to a single antenna
system.Comment: Submitted to the 2017 IEEE JSAC Special Issue on Deployment Issues
and Performance Challenges for 5G, IEEE Journal on Selected Areas in
Communications, 2017, vol.PP, no.99, pp.1-
- …