13 research outputs found

    Image Simulation in Remote Sensing

    Get PDF
    Remote sensing is being actively researched in the fields of environment, military and urban planning through technologies such as monitoring of natural climate phenomena on the earth, land cover classification, and object detection. Recently, satellites equipped with observation cameras of various resolutions were launched, and remote sensing images are acquired by various observation methods including cluster satellites. However, the atmospheric and environmental conditions present in the observed scene degrade the quality of images or interrupt the capture of the Earth's surface information. One method to overcome this is by generating synthetic images through image simulation. Synthetic images can be generated by using statistical or knowledge-based models or by using spectral and optic-based models to create a simulated image in place of the unobtained image at a required time. Various proposed methodologies will provide economical utility in the generation of image learning materials and time series data through image simulation. The 6 published articles cover various topics and applications central to Remote sensing image simulation. Although submission to this Special Issue is now closed, the need for further in-depth research and development related to image simulation of High-spatial and spectral resolution, sensor fusion and colorization remains.I would like to take this opportunity to express my most profound appreciation to the MDPI Book staff, the editorial team of Applied Sciences journal, especially Ms. Nimo Lang, the assistant editor of this Special Issue, talented authors, and professional reviewers

    Radar Imaging in Challenging Scenarios from Smart and Flexible Platforms

    Get PDF
    undefine

    Remote Sensing

    Get PDF
    This dual conception of remote sensing brought us to the idea of preparing two different books; in addition to the first book which displays recent advances in remote sensing applications, this book is devoted to new techniques for data processing, sensors and platforms. We do not intend this book to cover all aspects of remote sensing techniques and platforms, since it would be an impossible task for a single volume. Instead, we have collected a number of high-quality, original and representative contributions in those areas

    Elevation and Deformation Extraction from TomoSAR

    Get PDF
    3D SAR tomography (TomoSAR) and 4D SAR differential tomography (Diff-TomoSAR) exploit multi-baseline SAR data stacks to provide an essential innovation of SAR Interferometry for many applications, sensing complex scenes with multiple scatterers mapped into the same SAR pixel cell. However, these are still influenced by DEM uncertainty, temporal decorrelation, orbital, tropospheric and ionospheric phase distortion and height blurring. In this thesis, these techniques are explored. As part of this exploration, the systematic procedures for DEM generation, DEM quality assessment, DEM quality improvement and DEM applications are first studied. Besides, this thesis focuses on the whole cycle of systematic methods for 3D & 4D TomoSAR imaging for height and deformation retrieval, from the problem formation phase, through the development of methods to testing on real SAR data. After DEM generation introduction from spaceborne bistatic InSAR (TanDEM-X) and airborne photogrammetry (Bluesky), a new DEM co-registration method with line feature validation (river network line, ridgeline, valley line, crater boundary feature and so on) is developed and demonstrated to assist the study of a wide area DEM data quality. This DEM co-registration method aligns two DEMs irrespective of the linear distortion model, which improves the quality of DEM vertical comparison accuracy significantly and is suitable and helpful for DEM quality assessment. A systematic TomoSAR algorithm and method have been established, tested, analysed and demonstrated for various applications (urban buildings, bridges, dams) to achieve better 3D & 4D tomographic SAR imaging results. These include applying Cosmo-Skymed X band single-polarisation data over the Zipingpu dam, Dujiangyan, Sichuan, China, to map topography; and using ALOS L band data in the San Francisco Bay region to map urban building and bridge. A new ionospheric correction method based on the tile method employing IGS TEC data, a split-spectrum and an ionospheric model via least squares are developed to correct ionospheric distortion to improve the accuracy of 3D & 4D tomographic SAR imaging. Meanwhile, a pixel by pixel orbit baseline estimation method is developed to address the research gaps of baseline estimation for 3D & 4D spaceborne SAR tomography imaging. Moreover, a SAR tomography imaging algorithm and a differential tomography four-dimensional SAR imaging algorithm based on compressive sensing, SAR interferometry phase (InSAR) calibration reference to DEM with DEM error correction, a new phase error calibration and compensation algorithm, based on PS, SVD, PGA, weighted least squares and minimum entropy, are developed to obtain accurate 3D & 4D tomographic SAR imaging results. The new baseline estimation method and consequent TomoSAR processing results showed that an accurate baseline estimation is essential to build up the TomoSAR model. After baseline estimation, phase calibration experiments (via FFT and Capon method) indicate that a phase calibration step is indispensable for TomoSAR imaging, which eventually influences the inversion results. A super-resolution reconstruction CS based study demonstrates X band data with the CS method does not fit for forest reconstruction but works for reconstruction of large civil engineering structures such as dams and urban buildings. Meanwhile, the L band data with FFT, Capon and the CS method are shown to work for the reconstruction of large manmade structures (such as bridges) and urban buildings

    Analysis of the 2015 Sagavanirktok River flood: associated permafrost degradation using InSAR and change detection techniques

    Get PDF
    Thesis (M.S.) University of Alaska Fairbanks, 2020In 2015, the Sagavanirktok River experienced a sequence of high, early-winter temperatures that lead to a buildup of aufeis. The buildup displaced the spring runoff causing widespread flooding. Flood waters inundated the surrounding tundra introducing heat into ground ice-baring soils. The Sagavanirktok River flood was caused by an extensive ice dam that developed the previous winter. The first flooding pulse started in April 2015, when an aufeis obstruction diverted river water to the surface. The obstruction caused flooding along 24 km of the Dalton Highway and its surroundings, necessitating a prolonged highway closure and emergency repairs. A second flooding pulse was caused by annual spring runoff in May 2015, which was driven by rapid snowmelt due to warm seasonal temperatures. The washed-out highway had to be closed again. Field investigations showed that thermal erosion of ice wedges in the tundra adjacent to the Dalton Highway caused local subsidence by several meters. However, the full environmental impact of the flood has not yet been quantified regionally or temporally. Thermokarst formation, can cause rapid ecological and environmental changes. Thawing of permafrost can lead to terrain instability as the melting of ground ice induces subsidence and loss of soil strength. The processes involved in permafrost degradation are complex, as is predicting terrain stability and the associated impacts to permafrost surrounding infrastructure. The immediate impact of the 2015 Sagavanirktok River flood is evident, which caused rapid terrain collapse in the vicinity of the Dalton Highway and the Trans-Alaska Pipeline near Deadhorse, North Slope Borough, Alaska. Thermal degradation of permafrost can be expressed as the change in the surfacemicrotopography over several years following a flood. Change detection, digital elevation model differencing, and InSAR were employed within the area of interest to understand the extent of the flood and deformation within inundated areas. To determine the likely impacted areas within the area of interest and expanse of the flood, an unsupervised change detection technique of high resolution TerraSAR-X and Sentinel-1 amplitude images was utilized. The topographic deformation analysis to determine the motion on the ground surface used a short baseline subset InSAR analysis of Sentinel-1 data during the summer season following the Sagavanirktok River flooding events. Additional deformation analysis was conducted with ALOS-2 data for annual comparison of the 2015 to 2019 summers. TanDEM-X digital elevation model differencing compared surface models generated from before and after the Sagavanirktok River flood. Elevation model differencing would identify the absolute change between the acquisition time of the surface models. A joint data analysis between deformation and differenced elevation models analyzed the contrast within inundated and flood-unaffected areas; thus, the changes and impact to the permafrost following the 2015 Sagavanirktok River flood. The Sagavanirktok River flood highlights the vulnerability of ice-rich permafrost to flooding. A change in the vicinity of the Sagavanirktok River Delta to the hydrological cycle led to widespread increases in terrain instability. Analysis of summer season deformation data suggested inundated permafrost areas showed lower seasonal deformation in years following the flood. Analysis of annual deformation shows permafrost subsidence intensified in inundated areas in the years following the flood. Digital elevation model differencing produced a statistically ambiguous result. This research illustrates the value of combining TerraSAR-X, TanDEM-X, Sentinel 1, and ALOS-2 microwave remote sensing missions for evaluating widespread surface changes in arctic environments. However, annual deformation data proved the most usable tool in observing the changing permafrost ecosystems around the Sagavanirktok River.Geomatics Office of the National Geospatial-Intelligence Agenc

    Metrics to evaluate compressions algorithms for RAW SAR data

    Get PDF
    Modern synthetic aperture radar (SAR) systems have size, weight, power and cost (SWAP-C) limitations since platforms are becoming smaller, while SAR operating modes are becoming more complex. Due to the computational complexity of the SAR processing required for modern SAR systems, performing the processing on board the platform is not a feasible option. Thus, SAR systems are producing an ever-increasing volume of data that needs to be transmitted to a ground station for processing. Compression algorithms are utilised to reduce the data volume of the raw data. However, these algorithms can cause degradation and losses that may degrade the effectiveness of the SAR mission. This study addresses the lack of standardised quantitative performance metrics to objectively quantify the performance of SAR data-compression algorithms. Therefore, metrics were established in two different domains, namely the data domain and the image domain. The data-domain metrics are used to determine the performance of the quantisation and the associated losses or errors it induces in the raw data samples. The image-domain metrics evaluate the quality of the SAR image after SAR processing has been performed. In this study three well-known SAR compression algorithms were implemented and applied to three real SAR data sets that were obtained from a prototype airborne SAR system. The performance of these algorithms were evaluated using the proposed metrics. Important metrics in the data domain were found to be the compression ratio, the entropy, statistical parameters like the skewness and kurtosis to measure the deviation from the original distributions of the uncompressed data, and the dynamic range. The data histograms are an important visual representation of the effects of the compression algorithm on the data. An important error measure in the data domain is the signal-to-quantisation-noise ratio (SQNR), and the phase error for applications where phase information is required to produce the output. Important metrics in the image domain include the dynamic range, the impulse response function, the image contrast, as well as the error measure, signal-to-distortion-noise ratio (SDNR). The metrics suggested that all three algorithms performed well and are thus well suited for the compression of raw SAR data. The fast Fourier transform block adaptive quantiser (FFT-BAQ) algorithm had the overall best performance, but the analysis of the computational complexity of its compression steps, indicated that it is has the highest level of complexity compared to the other two algorithms. Since different levels of degradation are acceptable for different SAR applications, a trade-off can be made between the data reduction and the degradation caused by the algorithm. Due to SWAP-C limitations, there also remains a trade-off between the performance and the computational complexity of the compression algorithm.Dissertation (MEng)--University of Pretoria, 2019.TM2019Electrical, Electronic and Computer EngineeringMEngUnrestricte

    Metrics to evaluate compressions algorithms for RAW SAR data

    Get PDF
    Modern synthetic aperture radar (SAR) systems have size, weight, power and cost (SWAP-C) limitations since platforms are becoming smaller, while SAR operating modes are becoming more complex. Due to the computational complexity of the SAR processing required for modern SAR systems, performing the processing on board the platform is not a feasible option. Thus, SAR systems are producing an ever-increasing volume of data that needs to be transmitted to a ground station for processing. Compression algorithms are utilised to reduce the data volume of the raw data. However, these algorithms can cause degradation and losses that may degrade the effectiveness of the SAR mission. This study addresses the lack of standardised quantitative performance metrics to objectively quantify the performance of SAR data-compression algorithms. Therefore, metrics were established in two different domains, namely the data domain and the image domain. The data-domain metrics are used to determine the performance of the quantisation and the associated losses or errors it induces in the raw data samples. The image-domain metrics evaluate the quality of the SAR image after SAR processing has been performed. In this study three well-known SAR compression algorithms were implemented and applied to three real SAR data sets that were obtained from a prototype airborne SAR system. The performance of these algorithms were evaluated using the proposed metrics. Important metrics in the data domain were found to be the compression ratio, the entropy, statistical parameters like the skewness and kurtosis to measure the deviation from the original distributions of the uncompressed data, and the dynamic range. The data histograms are an important visual representation of the effects of the compression algorithm on the data. An important error measure in the data domain is the signal-to-quantisation-noise ratio (SQNR), and the phase error for applications where phase information is required to produce the output. Important metrics in the image domain include the dynamic range, the impulse response function, the image contrast, as well as the error measure, signal-to-distortion-noise ratio (SDNR). The metrics suggested that all three algorithms performed well and are thus well suited for the compression of raw SAR data. The fast Fourier transform block adaptive quantiser (FFT-BAQ) algorithm had the overall best performance, but the analysis of the computational complexity of its compression steps, indicated that it is has the highest level of complexity compared to the other two algorithms. Since different levels of degradation are acceptable for different SAR applications, a trade-off can be made between the data reduction and the degradation caused by the algorithm. Due to SWAP-C limitations, there also remains a trade-off between the performance and the computational complexity of the compression algorithm.Dissertation (MEng)--University of Pretoria, 2019.Electrical, Electronic and Computer EngineeringMEngUnrestricte

    Merging digital surface models sourced from multi-satellite imagery and their consequent application in automating 3D building modelling

    Get PDF
    Recently, especially within the last two decades, the demand for DSMs (Digital Surface Models) and 3D city models has increased dramatically. This has arisen due to the emergence of new applications beyond construction or analysis and consequently to a focus on accuracy and the cost. This thesis addresses two linked subjects: first improving the quality of the DSM by merging different source DSMs using a Bayesian approach; and second, extracting building footprints using approaches, including Bayesian approaches, and producing 3D models. Regarding the first topic, a probabilistic model has been generated based on the Bayesian approach in order to merge different source DSMs from different sensors. The Bayesian approach is specified to be ideal in the case when the data is limited and this can consequently be compensated by introducing the a priori. The implemented prior is based on the hypothesis that the building roof outlines are specified to be smooth, for that reason local entropy has been implemented in order to infer the a priori data. In addition to the a priori estimation, the quality of the DSMs is obtained by using field checkpoints from differential GNSS. The validation results have shown that the model was successfully able to improve the quality of the DSMs and improving some characteristics such as the roof surfaces, which consequently led to better representations. In addition to that, the developed model has been compared with the Maximum Likelihood model which showed similar quantitative statistical results and better qualitative results. Perhaps it is worth mentioning that, although the DSMs used in the merging have been produced using satellite images, the model can be applied on any type of DSM. The second topic is building footprint extraction based on using satellite imagery. An efficient flow-line for automatic building footprint extraction and 3D model construction, from both stereo panchromatic and multispectral satellite imagery was developed. This flow-line has been applied in an area of different building types, with both hipped and sloped roofs. The flow line consisted of multi stages. First, data preparation, digital orthoimagery and DSMs are created from WorldView-1. Pleiades imagery is used to create a vegetation mask. The orthoimagery then undergoes binary classification into ‘foreground’ (including buildings, shadows, open-water, roads and trees) and ‘background’ (including grass, bare soil, and clay). From the foreground class, shadows and open water are removed after creating a shadow mask by thresholding the same orthoimagery. Likewise roads have been removed, for the time being, after interactively creating a mask using the orthoimagery. NDVI processing of the Pleiades imagery has been used to create a mask for removing the trees. An ‘edge map’ is produced using Canny edge detection to define the exact building boundary outlines, from enhanced orthoimagery. A normalised digital surface model (nDSM) is produced from the original DSM using smoothing and subtracting techniques. Second, start Building Detection and Extraction. Buildings can be detected, in part, in the nDSM as isolated relatively elevated ‘blobs’. These nDSM ‘blobs’ are uniquely labelled to identify rudimentary buildings. Each ‘blob’ is paired with its corresponding ‘foreground’ area from the orthoimagery. Each ‘foreground’ area is used as an initial building boundary, which is then vectorised and simplified. Some unnecessary details in the ‘edge map’, particularly on the roofs of the buildings can be removed using mathematical morphology. Some building edges are not detected in the ‘edge map’ due to low contrast in some parts of the orthoimagery. The ‘edge map’ is subsequently further improved also using mathematical morphology, leading to the ‘modified edge map’. Finally, A Bayesian approach is used to find the most probable coordinates of the building footprints, based on the ‘modified edge map’. The proposal that is made for the footprint a priori data is based on the creating a PDF which assumes that the probable footprint angle at the corner is 90o and along the edge is 180o, with a less probable value given to the other angles such as 45o and 135o. The 3D model is constructed by extracting the elevation of the buildings from the DSM and combining it with the regularized building boundary. Validation, both quantitatively and qualitatively has shown that the developed process and associated algorithms have successfully been able to extract building footprints and create 3D models

    Distributed agents for autonomous spacecraft

    Get PDF
    Space missions have evolved considerably in the last fifty years in both complexity and ambition. In order to enable this continued improvement in the scientific and commercial return of space missions new control systems are needed that can manage complex combinations of state of the art hardware with a minimum of human interaction. Distributed multi-agent systems are one approach to controlling complex multisatellite space missions. A distributed system is not enough on its own however,the spacecraft must be able to carry out complex tasks such as planning,negotiation and close proximity formation flying autonomously. It is the coupling of distributed control with autonomy that is the focus of this thesis. Three contributions to the state of the art are described herein. They all involve the innovative use of multi-agent systems in space missions. The first is the development of a multi-agent architecture, HASA, specifically for space missions. The second is to use embedded agents to autonomously control an interferometric type space telescope. The third is based on software agents that coordinate multiple Earth observation missions coupled with a global optimisation technique for data extraction. The HASA architecture was developed in reaction to the over generality of most multi-agent architectures in the computer science and robotics literature and the ad-hoc, case-by-case approach, to multi-agent architectures when developed and deployed for space missions. The HASA architecture has a recursive nature which allows for the multi-agent system to be completely described throughout its development process as the design evolves and more sub-systems are implemented. It also inherits a focus on the robust generation of a product and safe operation from architectures in use in the manufacturing industry. A multi-agent system was designed using the HASA architecture for an interferometric space telescope type mission. This type of mission puts high requirements on formation flying and cooperation between agents. The formation flying agents were then implemented using a Java framework and tested on a multi-platform distributed simulation suite developed especially for this thesis. Three different control methods were incorporated into the agents and the multi-agent system was shown to be able to acquire and change formation and avoid collisions autonomously. A second multi-agent system was designed for the GMES mission in collaboration with GMV, the industrial partner in this project. This basic MAS design was transferred to the HASA architecture. A novel image selection algorithm was developed to work alongside the GMES multi-agent system. This algorithm uses global optimisation techniques to suggest image parameters to users based on the output of the multi-agent system

    High-accuracy digital elevation model generation and ship monitoring from synthetic aperture radar images: innovative techniques and experimental results.

    Get PDF
    In this Thesis several state-of-the-art and innovative techniques for Digital Elevation Model (DEM) generation from Synthetic Aperture Radar (SAR) images are deeply analyzed, with a special focus on the methods which allow the improvement of the accuracy of the DEM product, which is directly related to the geolocation accuracy of geocoded images and is considered as an enabling factor for a large series of civilian and Defence applications. Furthermore, some of the proposed techniques, which are based both on phase and amplitude information, are experimented on real data, i.e. COSMO-SkyMed (CSK) data, assessing the achievable performances compared with the state-of-the-art, and pointing out and quantitatively highlighting the acquisition and processing strategies which would allow to maximize the quality of the results. Moreover, a critical analysis is performed about the main errors affecting the applied techniques, as well as the limitations of the orbital configurations, identifying several complementary techniques which would allow to overcome or mitigate the observed drawbacks. An innovative procedure for on-demand DEM production from CSK SAR data is elaborated and proposed, as well as an auto-validation technique which would enable the validation of the produced DEM also where vertical ground truths are not available. Based on the obtained results and on the consequent critical analysis, several interferometric specifications for new generation SAR satellites are identified. Finally, a literature review is proposed about the main state-of-the-art ship monitoring techniques, considered as one of the main fields of application which takes benefit from SAR data, based on single/multi-platform multi-channel SAR data, with a focus on TanDEM-X (TDX). In particular, in Chapter 1 the main concepts concerning SAR operating principles are introduced and the main characteristics and performances of CSK and TDX satellite systems are described; in Chapter 2 a review is proposed about the state-of-the-art SAR interferometric techniques for DEM generation, analyzing all the relevant processing steps and deepening the study of the main solutions recently proposed in the literature to increase the accuracy of the interferometric processing; in Chapter 3 complementary and innovative techniques respect to the interferometric processing are analyzed to mitigate disadvantages and to improve performances; in Chapter 4 experimental results are presented, obtained in the generation of high accuracy DEM by applying to a dataset of CSK images properly selected state-of-the-art interferometric techniques and innovative methods to improve DEM accuracy, exploring relevant limitations, and pointing out innovative acquisition and processing strategies. In Chapter 5, the basic principles of Ground Moving Target Indication (GMTI) are described, focusing on Displaced Phase Center Antenna (DPCA) and Along-Track Interferometry (ATI) techniques
    corecore