A case study for NoC based homogeneous MPSoC architectures

The many-core design paradigm requires flexible and modular hardware and software components to provide the required scalability to next-generation on-chip multiprocessor architectures. A multidisciplinary approach is necessary to consider all the interactions between the different components of the design. In this paper, a complete design methodology that tackles at once the aspects of system level modeling, hardware architecture, and programming model has been successfully used for the implementation of a multiprocessor network-on-chip (NoC)-based system, the NoCRay graphic accelerator. The design, based on 16 processors, after prototyping with field-programmable gate array (FPGA), has been laid out in 90-nm technology. Post-layout results show very low power, area, as well as 500 MHz of clock frequency. Results show that an array of small and simple processors outperform a single high-end general purpose processo

Design and implementation of the Quarc network on-chip

Networks-on-Chip (NoC) have emerged as alternative to buses to provide a packet-switched communication medium for modular development of large Systems-on-Chip. However, to successfully replace its predecessor, the NoC has to be able to efficiently exchange all types of traffic including collective communications. The latter is especially important for e.g. cache updates in multicore systems. The Quarc NoC architecture has been introduced as a Networks-on-Chip which is highly efficient in exchanging all types of traffic including broadcast and multicast. In this paper we present the hardware implementation of the switch architecture and the network adapter (transceiver) of the Quarc NoC. Moreover, the paper presents an analysis and comparison of the cost and performance between the Quarc and the Spidergon NoCs implemented in Verilog targeting the Xilinx Virtex FPGA family. We demonstrate a dramatic improvement in performance over the Spidergon especially for broadcast traffic, at no additional hardware cost

Fast, Accurate and Detailed NoC Simulations

Network-on-Chip (NoC) architectures have a wide variety of parameters that can be adapted to the designer's requirements. Fast exploration of this parameter space is only possible at a high-level and several methods have been proposed. Cycle and bit accurate simulation is necessary when the actual router's RTL description needs to be evaluated and verified. However, extensive simulation of the NoC architecture with cycle and bit accuracy is prohibitively time consuming. In this paper we describe a simulation method to simulate large parallel homogeneous and heterogeneous network-on-chips on a single FPGA. The method is especially suitable for parallel systems where lengthy cycle and bit accurate simulations are required. As a case study, we use a NoC that was modelled and simulated in SystemC. We simulate the same NoC on the described FPGA simulator. This enables us to observe the NoC behavior under a large variety of traffic patterns. Compared with the SystemC simulation we achieved a speed-up of 80-300, without compromising the cycle and bit level accuracy

Flexible Spare Core Placement in Torus Topology based NoCs and its validation on an FPGA

In the nano-scale era, Network-on-Chip (NoC) interconnection paradigm has gained importance to abide by the communication challenges in Chip Multi-Processors (CMPs). With increased integration density on CMPs, NoC components namely cores, routers, and links are susceptible to failures. Therefore, to improve system reliability, there is a need for efficient fault-tolerant techniques that mitigate permanent faults in NoC based CMPs. There exists several fault-tolerant techniques that address the permanent faults in application cores while placing the spare cores onto NoC topologies. However, these techniques are limited to Mesh topology based NoCs. There are few approaches that have realized the fault-tolerant solutions on an FPGA, but the study on architectural aspects of NoC is limited. This paper presents the flexible placement of spare core onto Torus topology-based NoC design by considering core faults and validating it on an FPGA. In the first phase, a mathematical formulation based on Integer Linear Programming (ILP) and meta-heuristic based Particle Swarm Optimization (PSO) have been proposed for the placement of spare core. In the second phase, we have implemented NoC router addressing scheme, routing algorithm, run-time fault injection model, and fault-tolerant placement of spare core onto Torus topology using an FPGA. Experiments have been done by taking different multimedia and synthetic application benchmarks. This has been done in both static and dynamic simulation environments followed by hardware implementation. In the static simulation environment, the experimentations are carried out by scaling the network size and router faults in the network. The results obtained from our approach outperform the methods such as Fault-tolerant Spare Core Mapping (FSCM), Simulated Annealing (SA), and Genetic Algorithm (GA) proposed in the literature. For the experiments carried out by scaling the network size, our proposed methodology shows an average improvement of 18.83%, 4.55%, 12.12% in communication cost over the approaches FSCM, SA, and GA, respectively. For the experiments carried out by scaling the router faults in the network, our approach shows an improvement of 34.27%, 26.26%, and 30.41% over the approaches FSCM, SA, and GA, respectively. For the dynamic simulations, our approach shows an average improvement of 5.67%, 0.44%, and 3.69%, over the approaches FSCM, SA, and GA, respectively. In the hardware implementation, our approach shows an average improvement of 5.38%, 7.45%, 27.10% in terms of application runtime over the approaches SA, GA, and FSCM, respectively. This shows the superiority of the proposed approach over the approaches presented in the literature.publishedVersio

Using an FPGA for Fast Bit Accurate SoC Simulation

In this paper we describe a sequential simulation method to simulate large parallel homo- and heterogeneous systems on a single FPGA. The method is applicable for parallel systems were lengthy cycle and bit accurate simulations are required. It is particularly designed for systems that do not fit completely on the simulation platform (i.e. FPGA). As a case study, we use a Network-on-Chip (NoC) that is simulated in SystemC and on the described FPGA simulator. This enables us to observe the NoC behavior under a large variety of traffic patterns. Compared with the SystemC simulation we achieved a factor 80-300 of speed improvement, without compromising the cycle and bit level accuracy

Performance Evaluation of XY and XTRANC Routing Algorithm for Network on Chip and Implementation using DART Simulator

In today’s world Network on Chip(NoC) is one of the most efficient on chip communication platform for System on Chip where a large amount of computational and storage blocks are integrated on a single chip. NoCs are scalable and have tackled the short commings of SoCs . In the first part of this project the basics of NoCs is explained which includes why we should use NoC , how to implement NoC ,various blocks of NoCs .The next part of the project deals with the implementation of XY routing algorithm in mesh (3*3) and mesh (4*4) network topologies. The throughput and latency curves for both the topologies were found and a through comparison was done by varying the no of virtual cannels. In the next part an improvised routing algorithm known as the extended torus(XTRANC) routing algorithm for NoCs implementation is explained. This algorithm is designed for inner torus mesh networks and provides better performance than usual routing algorithms. It has been implemented using the CONNECT simulator. Then the DART simulator was explored and two important components namely the flitqueue and the traffic generator was designed using this simulator

A study on hardware design for high performance artificial neural network by using FPGA and NoC

制度:新 ; 報告番号:甲3421号 ; 学位の種類:博士(工学) ; 授与年月日:2011/9/15 ; 早大学位記番号:新574