691 research outputs found
Downlink Training in Cell-Free Massive MIMO: A Blessing in Disguise
Cell-free Massive MIMO (multiple-input multiple-output) refers to a
distributed Massive MIMO system where all the access points (APs) cooperate to
coherently serve all the user equipments (UEs), suppress inter-cell
interference and mitigate the multiuser interference. Recent works demonstrated
that, unlike co-located Massive MIMO, the \textit{channel hardening} is, in
general, less pronounced in cell-free Massive MIMO, thus there is much to
benefit from estimating the downlink channel. In this study, we investigate the
gain introduced by the downlink beamforming training, extending the previously
proposed analysis to non-orthogonal uplink and downlink pilots. Assuming
single-antenna APs, conjugate beamforming and independent Rayleigh fading
channel, we derive a closed-form expression for the per-user achievable
downlink rate that addresses channel estimation errors and pilot contamination
both at the AP and UE side. The performance evaluation includes max-min
fairness power control, greedy pilot assignment methods, and a comparison
between achievable rates obtained from different capacity-bounding techniques.
Numerical results show that downlink beamforming training, although increases
pilot overhead and introduces additional pilot contamination, improves
significantly the achievable downlink rate. Even for large number of APs, it is
not fully efficient for the UE relying on the statistical channel state
information for data decoding.Comment: Published in IEEE Transactions on Wireless Communications on August
14, 2019. {\copyright} 2019 IEEE. Personal use of this material is permitted.
Permission from IEEE must be obtained for all other use
Massive MIMO for Next Generation Wireless Systems
Multi-user Multiple-Input Multiple-Output (MIMO) offers big advantages over
conventional point-to-point MIMO: it works with cheap single-antenna terminals,
a rich scattering environment is not required, and resource allocation is
simplified because every active terminal utilizes all of the time-frequency
bins. However, multi-user MIMO, as originally envisioned with roughly equal
numbers of service-antennas and terminals and frequency division duplex
operation, is not a scalable technology. Massive MIMO (also known as
"Large-Scale Antenna Systems", "Very Large MIMO", "Hyper MIMO", "Full-Dimension
MIMO" & "ARGOS") makes a clean break with current practice through the use of a
large excess of service-antennas over active terminals and time division duplex
operation. Extra antennas help by focusing energy into ever-smaller regions of
space to bring huge improvements in throughput and radiated energy efficiency.
Other benefits of massive MIMO include the extensive use of inexpensive
low-power components, reduced latency, simplification of the media access
control (MAC) layer, and robustness to intentional jamming. The anticipated
throughput depend on the propagation environment providing asymptotically
orthogonal channels to the terminals, but so far experiments have not disclosed
any limitations in this regard. While massive MIMO renders many traditional
research problems irrelevant, it uncovers entirely new problems that urgently
need attention: the challenge of making many low-cost low-precision components
that work effectively together, acquisition and synchronization for
newly-joined terminals, the exploitation of extra degrees of freedom provided
by the excess of service-antennas, reducing internal power consumption to
achieve total energy efficiency reductions, and finding new deployment
scenarios. This paper presents an overview of the massive MIMO concept and
contemporary research.Comment: Final manuscript, to appear in IEEE Communications Magazin
Ubiquitous Cell-Free Massive MIMO Communications
Since the first cellular networks were trialled in the 1970s, we have
witnessed an incredible wireless revolution. From 1G to 4G, the massive traffic
growth has been managed by a combination of wider bandwidths, refined radio
interfaces, and network densification, namely increasing the number of antennas
per site. Due its cost-efficiency, the latter has contributed the most. Massive
MIMO (multiple-input multiple-output) is a key 5G technology that uses massive
antenna arrays to provide a very high beamforming gain and spatially
multiplexing of users, and hence, increases the spectral and energy efficiency.
It constitutes a centralized solution to densify a network, and its performance
is limited by the inter-cell interference inherent in its cell-centric design.
Conversely, ubiquitous cell-free Massive MIMO refers to a distributed Massive
MIMO system implementing coherent user-centric transmission to overcome the
inter-cell interference limitation in cellular networks and provide additional
macro-diversity. These features, combined with the system scalability inherent
in the Massive MIMO design, distinguishes ubiquitous cell-free Massive MIMO
from prior coordinated distributed wireless systems. In this article, we
investigate the enormous potential of this promising technology while
addressing practical deployment issues to deal with the increased
back/front-hauling overhead deriving from the signal co-processing.Comment: Published in EURASIP Journal on Wireless Communications and
Networking on August 5, 201
Massive MU-MIMO Downlink TDD Systems with Linear Precoding and Downlink Pilots
We consider a massive MU-MIMO downlink time-division duplex system where a
base station (BS) equipped with many antennas serves several single-antenna
users in the same time-frequency resource. We assume that the BS uses linear
precoding for the transmission. To reliably decode the signals transmitted from
the BS, each user should have an estimate of its channel. In this work, we
consider an efficient channel estimation scheme to acquire CSI at each user,
called beamforming training scheme. With the beamforming training scheme, the
BS precodes the pilot sequences and forwards to all users. Then, based on the
received pilots, each user uses minimum mean-square error channel estimation to
estimate the effective channel gains. The channel estimation overhead of this
scheme does not depend on the number of BS antennas, and is only proportional
to the number of users. We then derive a lower bound on the capacity for
maximum-ratio transmission and zero-forcing precoding techniques which enables
us to evaluate the spectral efficiency taking into account the spectral
efficiency loss associated with the transmission of the downlink pilots.
Comparing with previous work where each user uses only the statistical channel
properties to decode the transmitted signals, we see that the proposed
beamforming training scheme is preferable for moderate and low-mobility
environments.Comment: Allerton Conference on Communication, Control, and Computing,
Urbana-Champaign, Illinois, Oct. 201
Sectoring in Multi-cell Massive MIMO Systems
In this paper, the downlink of a typical massive MIMO system is studied when
each base station is composed of three antenna arrays with directional antenna
elements serving 120 degrees of the two-dimensional space. A lower bound for
the achievable rate is provided. Furthermore, a power optimization problem is
formulated and as a result, centralized and decentralized power allocation
schemes are proposed. The simulation results reveal that using directional
antennas at base stations along with sectoring can lead to a notable increase
in the achievable rates by increasing the received signal power and decreasing
'pilot contamination' interference in multicell massive MIMO systems. Moreover,
it is shown that using optimized power allocation can increase 0.95-likely rate
in the system significantly
Massive MIMO for Internet of Things (IoT) Connectivity
Massive MIMO is considered to be one of the key technologies in the emerging
5G systems, but also a concept applicable to other wireless systems. Exploiting
the large number of degrees of freedom (DoFs) of massive MIMO essential for
achieving high spectral efficiency, high data rates and extreme spatial
multiplexing of densely distributed users. On the one hand, the benefits of
applying massive MIMO for broadband communication are well known and there has
been a large body of research on designing communication schemes to support
high rates. On the other hand, using massive MIMO for Internet-of-Things (IoT)
is still a developing topic, as IoT connectivity has requirements and
constraints that are significantly different from the broadband connections. In
this paper we investigate the applicability of massive MIMO to IoT
connectivity. Specifically, we treat the two generic types of IoT connections
envisioned in 5G: massive machine-type communication (mMTC) and ultra-reliable
low-latency communication (URLLC). This paper fills this important gap by
identifying the opportunities and challenges in exploiting massive MIMO for IoT
connectivity. We provide insights into the trade-offs that emerge when massive
MIMO is applied to mMTC or URLLC and present a number of suitable communication
schemes. The discussion continues to the questions of network slicing of the
wireless resources and the use of massive MIMO to simultaneously support IoT
connections with very heterogeneous requirements. The main conclusion is that
massive MIMO can bring benefits to the scenarios with IoT connectivity, but it
requires tight integration of the physical-layer techniques with the protocol
design.Comment: Submitted for publicatio
A Multi-cell MMSE Precoder for Massive MIMO Systems and New Large System Analysis
In this paper, a new multi-cell MMSE precoder is proposed for massive MIMO
systems. We consider a multi-cell network where each cell has users and
orthogonal pilot sequences are available, with and
being the pilot reuse factor over the network. In comparison with conventional
single-cell precoding which only uses the intra-cell channel estimates, the
proposed multi-cell MMSE precoder utilizes all channel directions that can
be estimated locally at a base station, so that the transmission is designed
spatially to suppress both parts of the inter-cell and intra-cell interference.
To evaluate the performance, a large-scale approximation of the downlink SINR
for the proposed multi-cell MMSE precoder is derived and the approximation is
tight in the large-system limit. Power control for the pilot and payload,
imperfect channel estimation and arbitrary pilot allocation are accounted for
in our precoder. Numerical results show that the proposed multi-cell MMSE
precoder achieves a significant sum spectral efficiency gain over the classical
single-cell MMSE precoder and the gain increases as or grows.
Compared with the recent M-ZF precoder, whose performance degrades drastically
for a large , our M-MMSE can always guarantee a high and stable performance.
Moreover, the large-scale approximation is easy to compute and shown to be
accurate even for small system dimensions.Comment: 6 pages, 4 figures, accepted by Globecom 2015. arXiv admin note: text
overlap with arXiv:1509.0175
- …