Cross-layer system reliability assessment framework for hardware faults

System reliability estimation during early design phases facilitates informed decisions for the integration of effective protection mechanisms against different classes of hardware faults. When not all system abstraction layers (technology, circuit, microarchitecture, software) are factored in such an estimation model, the delivered reliability reports must be excessively pessimistic and thus lead to unacceptably expensive, over-designed systems. We propose a scalable, cross-layer methodology and supporting suite of tools for accurate but fast estimations of computing systems reliability. The backbone of the methodology is a component-based Bayesian model, which effectively calculates system reliability based on the masking probabilities of individual hardware and software components considering their complex interactions. Our detailed experimental evaluation for different technologies, microarchitectures, and benchmarks demonstrates that the proposed model delivers very accurate reliability estimations (FIT rates) compared to statistically significant but slow fault injection campaigns at the microarchitecture level.Peer ReviewedPostprint (author's final draft

Review on suitable eDRAM configurations for next nano-metric electronics era

We summarize most of our studies focused on the main reliability issues that can threat the gain-cells eDRAM behavior when it is simulated at the nano-metric device range has been collected in this review. So, to outperform their memory cell counterparts, we explored different technological proposals and operational regimes where it can be located. The best memory cell performance is observed for the 3T1D-eDRAM cell when it is based on FinFET devices. Both device variability and SEU appear as key reliability issues for memory cells at sub-22nm technology node.Peer ReviewedPostprint (author's final draft

Analysis of SoftError Rates for future technologies

La fiabilitat s'ha convertit en un aspecte important del disseny de sistemes informàtics a causa de la miniaturització de la tecnologia. En aquest projecte s'analitza la fiabilitat de les tecnologies actuals i futures simulant els components bàsics d'un processador

Alternative Lithographic Methods for Variable Aspect Ratio Vias

The foundation of semiconductor industry has historically been driven by scaling. Device size reduction is enabled by increased pattern density, enhancing functionality and effectively reducing cost per chip. Aggressive reductions in memory cell size have resulted in systems with diminishing area between parallel bit/word lines. This affords an even greater challenge in the patterning of contact level features that are inherently difficult to resolve because of their relatively small area, a product of their two domain critical dimension image. To accommodate these trends there has been a shift toward the implementation of elliptical contact features. This empowers designers to maximize the use of free space between bit/word lines and gate stacks while preserving contact area; effectively reducing the minor via axis dimension while maintaining a patternable threshold in increasingly dense circuitry. It is therefore critical to provide methods that enhance the resolving capacity of varying aspect ratio vias for implementation in electronic design systems. This work separately investigates two unique, non-traditional lithographic techniques in the integration of an optical vortex mask as well as a polymer assembly system as means to augment ellipticity while facilitating contact feature scaling. This document affords a fundamental overview of imaging theory, details previous literature as to the technological trends enabling the resolving of contact features and demonstrates simulated & empirical evidence that the described methods have great potential to extend the resolution of variable aspect ratio vias using lithographic technologies

Scaling and variability in ultra thin body silicon on insulator (UTB SOI) MOSFETs

The main objective of this thesis is to perform a comprehensive simulation study of the statistical variability in well scaled fully depleted ultra thin body silicon on insulator (FD-UTB SOI) at nanometer regime. It describes the design procedure for template FDUTB SOI transistor scaling and the impacts of statistical variability and reliability the scaled template transistor. The starting point of this study is a systematic simulation analysis based on a welldesigned 32nm thin body SOI template transistor provided by the FP7 project PULLNANO. The 32nm template transistor is consistent with the International Technology Roadmap for Semiconductor (ITRS) 2009 specifications. The wellestablished 3D ‘atomistic’ simulator GARAND has been employed in the designing of the scaled transistors and to carry out the statistical variability simulations. Following the foundation work in characterizing and optimizing the template 32 nm gate length transistor, the scaling proceeds down to 22 nm, 16 nm and 11 nm gate lengths using typically 0.7 scaling factor in respect of the horizontal and vertical transistor dimensions. The device design process is targeted for low power applications with a careful consideration of the impacts of the design parameters choice including buried oxide thickness (TBOX), source/drain doping abruptness (σ) and spacer length (Lspa). In order to determine the values of TBOX, σ, and Lspa, it is important to analyze simulation results, carefully assessing the impact on manufacturability and to consider the corresponding trade-off between short channel effects and on-current performance. Considering the above factors, TBOX = 10nm, σ = 2nm/dec and Lspa = 7nm have been adopted as optimum values respectively. iv The statistical variability of the transistor characteristics due to intrinsic parameter fluctuation (IPF) in well-scaled FD-UTB SOI devices is systematically studied for the first time. The impact of random dopant fluctuation (RDF), line edge roughness (LER) and metal gate granularity (MGG) on threshold voltage (Vth), on-current (Ion) and drain induced barrier lowering (DIBL) are analysed. Each principal sources of variability is treated individually and in combination with other variability sources in the simulation of large ensembles of microscopically different devices. The introduction of highk/ metal gate stack has improved the electrostatic integrity and enhanced the overall device performance. However, in the case of fully depleted channel transistors, MGG has become a dominant variability factor for all critical electrical parameters at gate first technology. For instance, σVth due to MGG increased to 41.9 mV at 11nm gate length compared to 26.0 mV at 22nm gate length. Similar trend has also been observed in σIon, increasing from 0.065 up to 0.174 mA/μm when the gate length is reduced from 22 nm down to 11 nm. Both RDF and LER have significant role in the intrinsic parameter fluctuations and therefore, none of these sources should be overlooked in the simulations. Finally, the impact of different variability sources in combination with positive bias temperature instability (PBTI) degradation on Vth, Ion and DIBL of the scaled nMOSFETs is investigated. Our study indicates that BTI induced charge trapping is a crucial reliability problem for the FD-UTB SOI transistors operation. Its impact not only introduces a significant degradation of transistor performance, but also accelerates the statistical variability. For example, the effect of a late degradation stage (at trap density of 1e12/cm2) in the presence of RDF, LER and MGG results in σVth increase to 36.9 mV, 45.0 mV and 58.3 mV for 22 nm, 16 nm and 11 nm respectively from the original 29.0 mV, 37.9 mV and 50.4 mV values in the fresh transistors

Software-based and regionally-oriented traffic management in Networks-on-Chip

Since the introduction of chip-multiprocessor systems, the number of integrated cores has been steady growing and workload applications have been adapted to exploit the increasing parallelism. This changed the importance of efficient on-chip communication significantly and the infrastructure has to keep step with these new requirements. The work at hand makes significant contributions to the state-of-the-art of the latest generation of such solutions, called Networks-on-Chip, to improve the performance, reliability, and flexible management of these on-chip infrastructures

Carbon nanotubes as interconnect for next generation network on chip

Multi-core processors provide better performance when compared with their single-core equivalent. Recently, Networks-on-Chip (NoC) have emerged as a communication methodology for multi core chips. Network-on-Chip uses packet based communication for establishing a communication path between multiple cores connected via interconnects. Clock frequency, energy consumption and chip size are largely determined by these interconnects. According to the International Technology Roadmap for Semiconductors (ITRS), in the next five years up to 80% of microprocessor power will be consumed by interconnects. In the sub 100nm scaling range, interconnect behavior limits the performance and correctness of VLSI systems. The performance of copper interconnects tend to get reduced in the sub 100nm range and hence we need to examine other interconnect options. Single Wall Carbon Nanotubes exhibit better performance in sub 100nm processing technology due to their very large current carrying capacity and large electron mean free paths. This work suggests using Single Wall Carbon Nanotubes (SWCNT) as interconnects for Networks-on-Chip as they consume less energy and gives more throughput and bandwidth when compared with traditional Copper wires

Cross layer reliability estimation for digital systems

Forthcoming manufacturing technologies hold the promise to increase multifuctional computing systems performance and functionality thanks to a remarkable growth of the device integration density. Despite the benefits introduced by this technology improvements, reliability is becoming a key challenge for the semiconductor industry. With transistor size reaching the atomic dimensions, vulnerability to unavoidable fluctuations in the manufacturing process and environmental stress rise dramatically. Failing to meet a reliability requirement may add excessive re-design cost to recover and may have severe consequences on the success of a product. %Worst-case design with large margins to guarantee reliable operation has been employed for long time. However, it is reaching a limit that makes it economically unsustainable due to its performance, area, and power cost. One of the open challenges for future technologies is building ``dependable'' systems on top of unreliable components, which will degrade and even fail during normal lifetime of the chip. Conventional design techniques are highly inefficient. They expend significant amount of energy to tolerate the device unpredictability by adding safety margins to a circuit's operating voltage, clock frequency or charge stored per bit. Unfortunately, the additional cost introduced to compensate unreliability are rapidly becoming unacceptable in today's environment where power consumption is often the limiting factor for integrated circuit performance, and energy efficiency is a top concern. Attention should be payed to tailor techniques to improve the reliability of a system on the basis of its requirements, ending up with cost-effective solutions favoring the success of the product on the market. Cross-layer reliability is one of the most promising approaches to achieve this goal. Cross-layer reliability techniques take into account the interactions between the layers composing a complex system (i.e., technology, hardware and software layers) to implement efficient cross-layer fault mitigation mechanisms. Fault tolerance mechanism are carefully implemented at different layers starting from the technology up to the software layer to carefully optimize the system by exploiting the inner capability of each layer to mask lower level faults. For this purpose, cross-layer reliability design techniques need to be complemented with cross-layer reliability evaluation tools, able to precisely assess the reliability level of a selected design early in the design cycle. Accurate and early reliability estimates would enable the exploration of the system design space and the optimization of multiple constraints such as performance, power consumption, cost and reliability. This Ph.D. thesis is devoted to the development of new methodologies and tools to evaluate and optimize the reliability of complex digital systems during the early design stages. More specifically, techniques addressing hardware accelerators (i.e., FPGAs and GPUs), microprocessors and full systems are discussed. All developed methodologies are presented in conjunction with their application to real-world use cases belonging to different computational domains