5,443 research outputs found

    Fuzzy Sliding Mode Control of a Ball Screw Driven Stage

    Get PDF

    Modeling and Control of Piezoelectric Actuators

    Get PDF
    Piezoelectric actuators (PEAs) utilize the inverse piezoelectric effect to generate fine displacement with a resolution down to sub-nanometers and as such, they have been widely used in various micro- and nanopositioning applications. However, the modeling and control of PEAs have proven to be challenging tasks. The main difficulties lie in the existence of various nonlinear or difficult-to-model effects in PEAs, such as hysteresis, creep, and distributive vibration dynamics. Such effects can seriously degrade the PEA tracking control performances or even lead to instability. This raises a great need to model and control PEAs for improved performance. This research is aimed at developing novel models for PEAs and on this basis, developing model-based control schemes for the PEA tracking control taking into account the aforementioned nonlinear effects. In the first part of this research, a model of a PEA for the effects of hysteresis, creep, and vibration dynamics was developed. Notably, the widely-used Preisach hysteresis model cannot represent the one-sided hysteresis of PEAs. To overcome this shortcoming, a rate-independent hysteresis model based on a novel hysteresis operator modified from the Preisach hysteresis operator was developed, which was then integrated with the models of creep and vibration dynamics to form a comprehensive model for PEAs. For its validation, experiments were carried out on a commercially-available PEA and the results obtained agreed with those from model simulations. By taking into account the linear dynamics and hysteretic behavior of the PEA as well as the presliding friction between the moveable platform and the end-effector, a model of the piezoelectric-driven stick-slip (PDSS) actuator was also developed in the first part of the research. The effectiveness of the developed model was illustrated by the experiments on the PDSS actuator prototyped in the author's lab. In the second part of the research, control schemes were developed based on the aforementioned PEA models for tracking control of PEAs. Firstly, a novel PID-based sliding mode (PIDSM) controller was developed. The rational behind the use of a sliding mode (SM) control is that the SM control can effectively suppress the effects of matched uncertainties, while the PEA hysteresis, creep, and external load can be represented by a lumped matched uncertainty based on the developed model. To solve the chattering and steady-state problems, associated with the ideal SM control and the SM control with boundary layer (SMCBL), the novel PIDSM control developed in the present study replaces the switching control term in the ideal SM control schemes with a PID regulator. Experiments were carried out on a commercially-available PEA and the results obtained illustrate the effectiveness of the PIDSM controller, and its superiorities over other schemes of PID control, ideal SM control, and the SMCBL in terms of steady state error elimination, chattering suppression, and tracking error suppression. Secondly, a PIDSM observer was also developed based on the model of PEAs to provide the PIDSM controller with state estimates of the PEA. And the PIDSM controller and the PIDSM observer were combined to form an integrated control scheme (PIDSM observer-controller or PIDSMOC) for PEAs. The effectiveness of the PIDSM observer and the PIDSMOC were also validated experimentally. The superiority of the PIDSMOC over the PIDSM controller with σ-β filter control scheme was also analyzed and demonstrated experimentally. The significance of this research lies in the development of novel models for PEAs and PDSS actuators, which can be of great help in the design and control of such actuators. Also, the development of the PIDSM controller, the PIDSM observer, and their integrated form, i.e., PIDSMOC, enables the improved performance of tracking control of PEAs with the presence of various nonlinear or difficult-to-model effects

    A nano-stepping robotic instrumentation platform

    Get PDF
    Thesis: Ph. D., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2013.Cataloged from PDF version of thesis.Includes bibliographical references (pages 115-118).The development of an Autonomous Nano-stepping Tool (ANT) system is presented. Each ANT is a small, tripodal, robotic instrument capable of untethered precision motion within a quasi-three-dimensional workspace of arbitrary size. The project aimed to address limitations of conventional benchtop micro/nanoscale measurement and manipulation systems by offering a low-cost, scalable alternative with comparable performance and extended functionality and flexibility. The design, fabrication, and evaluation the various electrical, mechanical, and software subsystems are discussed. Device prototypes are introduced along with a platform-agnostic interface for remote monitoring and control. The device step size and its frequency dependence are examined. A novel, high-resolution capacitive probe concept is detailed and characterized as an example of an inexpensive, low-power, sensor technology with which an ANT may be equipped to perform scanning probe microscopy. Several positioning schemes are discussed, including a distributed vision-based approach which utilized a custom cross-correlation processor.by Adam Joseph Wahab.Ph. D

    A Review of Modeling and Control of Piezoelectric Stick-Slip Actuators

    Get PDF
    Piezoelectric stick-slip actuators with high precision, large actuating force, and high displacement resolution are currently widely used in the field of high-precision micro-nano processing and manufacturing. However, the non-negligible, non-linear factors and complexity of their characteristics make its modeling and control quite difficult and affect the positioning accuracy and stability of the system. To obtain higher positioning accuracy and efficiency, modeling and control of piezoelectric stick-slip actuators are meaningful and necessary. Firstly, according to the working principle of stick-slip drive, this paper introduces the sub-models with different characteristics, such as hysteresis, dynamics, and friction, and presents the comprehensive modeling representative piezoelectric stick-slip actuators. Next, the control approaches suggested by different scholars are also summarized. Appropriate control strategies are adopted to reduce its tracking error and position error in response to the influence of various factors. Lastly, future research and application prospects in modeling and control are pointed out

    Doctor of Philosophy

    Get PDF
    dissertationIn this dissertation, we present methods for intuitive telemanipulation of manipulators that use piezoelectric stick-slip actuators (PSSAs). Commercial micro/nano-manipulators, which utilize PSSAs to achieve high precision over a large workspace, are typically controlled by a human operator at the joint level, leading to unintuitive and time-consuming telemanipulation. Prior work has considered the use of computer-vision-feedback to close a control loop for improved performance, but computer-vision-feedback is not a viable option for many end users. We discuss how open-loop models of the micro/nano-manipulator can be used to achieve desired end-effector movements, and we explain the process of obtaining open-loop models. We propose a rate-control telemanipulation method that utilizes the obtained model, and we experimentally quantify the effectiveness of the method using a common commercial manipulator (the Kleindiek MM3A). The utility of open-loop control methods for PSSAs with a human in the loop depends directly on the accuracy of the open-loop models of the manipulator. Prior research has shown that modeling of piezoelectric actuators is not a trivial task as they are known to suffer from nonlinearities that degrade their performance. We study the effect of static (non-inertial) loads on a prismatic and a rotary PSSA, and obtain a model relating the step size of the actuator to the load. The actuator-specific parameters of the model are calibrated by taking measurements in specific configurations of the manipulator. Results comparing the obtained model to experimental data are presented. PSSAs have properties that make them desirable over traditional DC-motor actuators for use in retinal surgery. We present a telemanipulation system for retinal surgery that uses a full range of existing disposable instruments. The system uses a PSSA-based manipulator that is compact and light enough that it could reasonably be made head-mounted to passively compensate for head movements. Two mechanisms are presented that enable the system to use existing disposable actuated instruments, and an instrument adapter enables quick-change of instruments during surgery. A custom stylus for a haptic interface enables intuitive and ergonomic telemanipulation of actuated instruments. Experimental results with a force-sensitive phantom eye show that telemanipulated surgery results in reduced forces on the retina compared to manual surgery, and training with the system results in improved performance. Finally, we evaluate operator efficiency with different haptic-interface kinematics for telemanipulated retinal surgery. Surgical procedures of the retina require precise manipulation of instruments inserted through trocars in the sclera. Telemanipulated robotic systems have been developed to improve retinal surgery, but there is not a unique mapping of the motions of the surgeon's hand to the lower-dimensional motions of the instrument through the trocar. We study operator performance during a precision positioning task on a force-sensing phantom retina, reminiscent of telemanipulated retinal surgery, with three common haptic-interface kinematics implemented in software on a PHANTOM Premium 6DOF haptic interface. Results from a study with 12 human subjects show that overall performance is best with the kinematics that represent a compact and inexpensive option, and that subjects' subjective preference agrees with the objective performance results

    Recent advances in the study of Micro/Nano Robotics in France.

    No full text
    International audienceIn France, during the last decade, significant research activities have been performed in the field of micro and nano robotics. Generally speaking the microrobotic field deals with the design, the fabrication and the control of microrobots and microrobotic cells. These microrobots are intended to perform various tasks in the so-called Microworld. The scale effects from macroworld to microworld deeply affect robots in the sense that new hard constraints appear as well as new manufacturing facilities. Concerning the nanorobotics, in order to achieve high-efficiency and three-dimensional nanomanipulation and nanoassembly, parallel imaging/manipulation force microscopy and three-dimensional manipulation force microscope, as well as nanmanipulation in the scanning electron microscope, have been developed. Manipulation of nanocomponents, such as nanoparticles, nanowires and nanotubes, have been addressed to build two-dimensional nano patterns and three-dimensional nano structure
    corecore