Fault Injection for Embedded Microprocessor-based Systems

Microprocessor-based embedded systems are increasingly used to control safety-critical systems (e.g., air and railway traffic control, nuclear plant control, aircraft and car control). In this case, fault tolerance mechanisms are introduced at the hardware and software level. Debugging and verifying the correct design and implementation of these mechanisms ask for effective environments, and Fault Injection represents a viable solution for their implementation. In this paper we present a Fault Injection environment, named FlexFI, suitable to assess the correctness of the design and implementation of the hardware and software mechanisms existing in embedded microprocessor-based systems, and to compute the fault coverage they provide. The paper describes and analyzes different solutions for implementing the most critical modules, which differ in terms of cost, speed, and intrusiveness in the original system behavio

EXFI: a low cost Fault Injection System for embedded Microprocessor-based Boards

Evaluating the faulty behavior of low-cost embedded microprocessor-based boards is an increasingly important issue, due to their adoption in many safety critical systems. The architecture of a complete Fault Injection environment is proposed, integrating a module for generating a collapsed list of faults, and another for performing their injection and gathering the results. To address this issue, the paper describes a software-implemented Fault Injection approach based on the Trace Exception Mode available in most microprocessors. The authors describe EXFI, a prototypical system implementing the approach, and provide data about some sample benchmark applications. The main advantages of EXFI are the low cost, the good portability, and the high efficienc

High-Integrity Performance Monitoring Units in Automotive Chips for Reliable Timing V&V

As software continues to control more system-critical functions in cars, its timing is becoming an integral element in functional safety. Timing validation and verification (V&V) assesses softwares end-to-end timing measurements against given budgets. The advent of multicore processors with massive resource sharing reduces the significance of end-to-end execution times for timing V&V and requires reasoning on (worst-case) access delays on contention-prone hardware resources. While Performance Monitoring Units (PMU) support this finer-grained reasoning, their design has never been a prime consideration in high-performance processors - where automotive-chips PMU implementations descend from - since PMU does not directly affect performance or reliability. To meet PMUs instrumental importance for timing V&V, we advocate for PMUs in automotive chips that explicitly track activities related to worst-case (rather than average) softwares behavior, are recognized as an ISO-26262 mandatory high-integrity hardware service, and are accompanied with detailed documentation that enables their effective use to derive reliable timing estimatesThis work has also been partially supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under grant TIN2015-65316-P and the HiPEAC Network of Excellence. Jaume Abella has been partially supported by the MINECO under Ramon y Cajal postdoctoral fellowship number RYC-2013-14717. Enrico Mezzet has been partially supported by the Spanish Ministry of Economy and Competitiveness under Juan de la Cierva-Incorporación postdoctoral fellowship number IJCI-2016- 27396.Peer ReviewedPostprint (author's final draft

Design of an integrated airframe/propulsion control system architecture

The design of an integrated airframe/propulsion control system architecture is described. The design is based on a prevalidation methodology that uses both reliability and performance. A detailed account is given for the testing associated with a subset of the architecture and concludes with general observations of applying the methodology to the architecture

Building safe software

Murphy is a set of techniques and tools under investigation for their potential in enhancing the safety of software. This paper describes some of the work which has been done and some which is planned

A Fault Injection Environment for Microprocessor-based Board

Evaluating the faulty behaviour of low-cost microprocessor-based boards is an increasingly important issue, due to their usage in many safety critical systems. To address this issue, the paper describes a software-implemented fault injection system based on the trace exception mode available in most microprocessors. The architecture of the complete fault injection environment is proposed, integrating modules for generating a fault list, for performing their injection and for gathering the results, respectively. Data gathered from some sample benchmark applications are presented The main advantages of the approach are low cost, good portability, and high efficienc

On the tailoring of CAST-32A certification guidance to real COTS multicore architectures

The use of Commercial Off-The-Shelf (COTS) multicores in real-time industry is on the rise due to multicores' potential performance increase and energy reduction. Yet, the unpredictable impact on timing of contention in shared hardware resources challenges certification. Furthermore, most safety certification standards target single-core architectures and do not provide explicit guidance for multicore processors. Recently, however, CAST-32A has been presented providing guidance for software planning, development and verification in multicores. In this paper, from a theoretical level, we provide a detailed review of CAST-32A objectives and the difficulty of reaching them under current COTS multicore design trends; at experimental level, we assess the difficulties of the application of CAST-32A to a real multicore processor, the NXP P4080.This work has been partially supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under grant TIN2015-65316-P and the HiPEAC Network of Excellence. Jaume Abella has been partially supported by the MINECO under Ramon y Cajal grant RYC-2013-14717.Peer ReviewedPostprint (author's final draft