33 research outputs found
Low-Weight Primes for Lightweight Elliptic Curve Cryptography on 8-bit AVR Processors
Small 8-bit RISC processors and micro-controllers based on the AVR instruction set architecture are widely used in the embedded domain with applications ranging from smartcards over control systems to wireless sensor nodes. Many of these applications require asymmetric encryption or authentication, which has spurred a body of research into implementation aspects of Elliptic Curve Cryptography (ECC) on the AVR platform. In this paper, we study the suitability of a special class of finite fields, the so-called Optimal Prime Fields (OPFs), for a "lightweight" implementation of ECC with a view towards high performance and security. An OPF is a finite field Fp defined by a prime of the form p = u*2^k + v, whereby both u and v are "small" (in relation to 2^k) so that they fit into one or two registers of an AVR processor. OPFs have a low Hamming weight, which allows for a very efficient implementation of the modular reduction since only the non-zero words of p need to be processed. We describe a special variant of Montgomery multiplication for OPFs that does not execute any input-dependent conditional statements (e.g. branch instructions) and is, hence, resistant against certain side-channel attacks. When executed on an Atmel ATmega processor, a multiplication in a 160-bit OPF takes just 3237 cycles, which compares favorably with other implementations of 160-bit modular multiplication on an 8-bit processor. We also describe a performance-optimized and a security-optimized implementation of elliptic curve scalar multiplication over OPFs. The former uses a GLV curve and executes in 4.19M cycles (over a 160-bit OPF), while the latter is based on a Montgomery curve and has an execution time of approximately 5.93M cycles. Both results improve the state-of-the-art in lightweight ECC on 8-bit processors
Fast Arithmetic on ATmega128 for Elliptic Curve Cryptography
Authentication protocols are indispensable in wireless sensor
networks. Commonly they are based on asymmetric cryptographic
algorithms. In this paper
we investigate all categories of finite fields suitable for elliptic
curve cryptography on the ATmega128 microcontroller: \F{p},
\F{2^d}, and \F{p^d}. It turns out that binary fields enable the
most efficient implementations
Implementação eficiente da Curve25519 para microcontroladores ARM
Orientador: Diego de Freitas AranhaDissertação (mestrado) - Universidade Estadual de Campinas, Instituto de ComputaçãoResumo: Com o advento da computação ubíqua, o fenômeno da Internet das Coisas (de Internet of Things) fará que com inúmeros dispositivos conectem-se um com os outros, enquanto trocam dados muitas vezes sensíveis pela sua natureza. Danos irreparáveis podem ser causados caso o sigilo destes seja quebrado. Isso causa preocupações acerca da segurança da comunicação e dos próprios dispositivos, que geralmente têm carência de mecanismos de proteção contra interferências físicas e pouca ou nenhuma medida de segurança. Enquanto desenvolver criptografia segura e eficiente como um meio de prover segurança à informação não é inédito, esse novo ambiente, com uma grande superfície de ataque, tem imposto novos desafios para a engenharia criptográfica. Uma abordagem segura para resolver este problema é utilizar blocos bem conhecidos e profundamente analisados, tal como o protocolo Segurança da Camada de Transporte (de Transport Layer Security, TLS). Na última versão desse padrão, as opções para Criptografia de Curvas Elípticas (de Elliptic Curve Cryptography - ECC) são expandidas para além de parâmetros estabelecidos por governos, tal como a proposta Curve25519 e protocolos criptográficos relacionados. Esse trabalho pesquisa implementações seguras e eficientes de Curve25519 para construir um esquema de troca de chaves em um microcontrolador ARM Cortex-M4, além do esquema de assinatura digital Ed25519 e a proposta de esquema de assinaturas digitais qDSA. Como resultado, operações de desempenho crítico, tal como o multiplicador de 256 bits, foram otimizadas; em particular, aceleração de 50% foi alcançada, impactando o desempenho de protocolos em alto nívelAbstract: With the advent of ubiquitous computing, the Internet of Things will undertake numerous devices connected to each other, while exchanging data often sensitive by nature. Breaching the secrecy of this data may cause irreparable damage. This raises concerns about the security of their communication and the devices themselves, which usually lack tamper resistance mechanisms or physical protection and even low to no security mesures. While developing efficient and secure cryptography as a mean to provide information security services is not a new problem, this new environment, with a wide attack surface, imposes new challenges to cryptographic engineering. A safe approach to solve this problem is reusing well-known and thoroughly analyzed blocks, such as the Transport Layer Security (TLS) protocol. In the last version of this standard, Elliptic Curve Cryptography options were expanded beyond government-backed parameters, such as the Curve25519 proposal and related cryptographic protocols. This work investigates efficient and secure implementations of Curve25519 to build a key exchange protocol on an ARM Cortex-M4 microcontroller, along the related signature scheme Ed25519 and a digital signature scheme proposal called qDSA. As result, performance-critical operations, such as a 256-bit multiplier, are greatly optimized; in this particular case, a 50% speedup is achieved, impacting the performance of higher-level protocolsMestradoCiência da ComputaçãoMestre em Ciência da ComputaçãoCAPESFuncam
Efficient and Side-Channel Resistant Implementations of Next-Generation Cryptography
The rapid development of emerging information technologies, such as quantum computing and the Internet of Things (IoT), will have or have already had a huge impact on the world. These technologies can not only improve industrial productivity but they could also bring more convenience to people’s daily lives. However, these techniques have “side effects” in the world of cryptography – they pose new difficulties and challenges from theory to practice. Specifically, when quantum computing capability (i.e., logical qubits) reaches a certain level, Shor’s algorithm will be able to break almost all public-key cryptosystems currently in use. On the other hand, a great number of devices deployed in IoT environments have very constrained computing and storage resources, so the current widely-used cryptographic algorithms may not run efficiently on those devices. A new generation of cryptography has thus emerged, including Post-Quantum Cryptography (PQC), which remains secure under both classical and quantum attacks, and LightWeight Cryptography (LWC), which is tailored for resource-constrained devices. Research on next-generation cryptography is of importance and utmost urgency, and the US National Institute of Standards and Technology in particular has initiated the standardization process for PQC and LWC in 2016 and in 2018 respectively.
Since next-generation cryptography is in a premature state and has developed rapidly in recent years, its theoretical security and practical deployment are not very well explored and are in significant need of evaluation. This thesis aims to look into the engineering aspects of next-generation cryptography, i.e., the problems concerning implementation efficiency (e.g., execution time and memory consumption) and security (e.g., countermeasures against timing attacks and power side-channel attacks). In more detail, we first explore efficient software implementation approaches for lattice-based PQC on constrained devices. Then, we study how to speed up isogeny-based PQC on modern high-performance processors especially by using their powerful vector units. Moreover, we research how to design sophisticated yet low-area instruction set extensions to further accelerate software implementations of LWC and long-integer-arithmetic-based PQC. Finally, to address the threats from potential power side-channel attacks, we present a concept of using special leakage-aware instructions to eliminate overwriting leakage for masked software implementations (of next-generation cryptography)
Recommended from our members
Privacy-preserving Payments for Transportation Systems
The operation of our society heavily relies on high mobility of people. Not only our social life but also our economy and trade are built upon a system where people need to be able to move around easily. The costs for building and maintaining a suitable transportation infrastructure to satisfy those needs are high, and to charge users is thus a central requirement. This calls for well functioning payment systems satisfying the multitude of requirements that transportation systems impose on them.
Electronic payment systems have many benefits over traditional cash payments as they are easy to maintain, can be more secure, reduce revenue collection costs, and can reduce the execution time of a payment. However, as a drawback, currently employed electronic payment systems usually reveal a payer’s identity during a payment which greatly infringes customer privacy. In the transportation domain this allows to generate fine grain patterns of customers’ locations.
Cryptographic payment protocols called e-cash have been proposed which allow to preserve a customer’s privacy. E-cash provides provable guarantees for both security and user privacy, as it allows secure, unlinkable payments which do not reveal the identity of the payer during a payment. From a security and privacy perspective these protocols present a good solution. However, even though e-cash protocols have been proposed three decades ago, there are relatively few actual implementations. One reason for this is their high computational complexity which makes an implementation on potential mobile payment devices rather difficult. While customers usually value their privacy they often do not accept to sacrifice convenience. A fast execution of payments is thus a hard constraint, which conflicts with the computational complexity of e-cash schemes.
This dissertation analyzes how e-cash can be used to solve the issue of privacy in the domain of transportation payments while satisfying the unique requirements of transportation payment systems and achieving high security and ease of use. Highlyefficient implementations of the underlying cryptographic primitives of e-cash schemes on constrained devices as they might be used in the transportation setting are presented. Based on the efficient implementations of these primitives, e-cash schemes are analyzed with regards to speed and hardware requirements. The results show that e-cash presents a good solution for privacy-preserving payments in the domain of public transport, if the number of coins that have to be spent can be limited. It is further practically shown that this limitation can be alleviated relying on the e-cash based privacy-preserving pre-payments with refunds scheme (P4R). Moreover, it is demonstrated that the promising feature of supporting the encoding of user attributes into electronic coins can be implemented at only moderate extra cost. Finally, an ecash based e-mobility payment scheme is presented which highlights the flexibility and unique advantages of e-cash based transportation payment schemes
Time-Efficient Finite Field Microarchitecture Design for Curve448 and Ed448 on Cortex-M4
The elliptic curve family of schemes has the lowest computational latency, memory use, energy consumption, and bandwidth requirements, making it the most preferred public key method for adoption into network protocols. Being suitable for embedded devices and applicable for key exchange and authentication, ECC is assuming a prominent position in the field of IoT cryptography. The attractive properties of the relatively new curve Curve448 contribute to its inclusion in the TLS1.3 protocol and pique the interest of academics and engineers aiming at studying and optimizing the schemes. When addressing low-end IoT devices, however, the literature indicates little work on these curves. In this paper, we present an efficient design for both protocols based on Montgomery curve Curve448 and its birationally equivalent Edwards curve Ed448 used for key agreement and digital signature algorithm, specifically the X448 function and the Ed448 DSA, relying on efficient low-level arithmetic operations targeting the ARM-based Cortex-M4 platform. Our design performs point multiplication, the base of the Elliptic Curve Diffie-Hellman (ECDH), in 3,2KCCs, resulting in more than 48% improvement compared to the best previous work based on Curve448, and performs sign and verify, the main operations of the Edwards-curves Digital Signature Algorithm (EdDSA), in 6,038KCCs and 7,404KCCs, showing a speedup of around 11% compared to the counterparts. We present novel modular multiplication and squaring architectures reaching ~25% and ~35% faster runtime than the previous best-reported results, respectively, based on Curve448 key exchange counterparts, and ~13% and ~25% better latency results than the Ed448-based digital signature counterparts targeting Cortex-M4 platform
MoTE-ECC: Energy-Scalable Elliptic Curve Cryptography for Wireless Sensor Networks
Wireless Sensor Networks (WSNs) are susceptible to a wide range of malicious attacks, which has stimulated a body of research on "light-weight" security protocols and cryptographic primitives that are suitable for resource-restricted sensor nodes. In this paper we introduce MoTE-ECC, a highly optimized yet scalable ECC library for Memsic's MICAz motes and other sensor nodes equipped with an 8-bit AVR processor. MoTE-ECC supports scalar multiplication on Montgomery and twisted Edwards curves over Optimal Prime Fields (OPFs) of variable size, e.g. 160, 192, 224, and 256 bits, which allows for various trade-offs between security and execution time (resp. energy consumption). OPFs are a special family of "low-weight" prime fields that, in contrast to the NIST-specified fields, facilitate a parameterized implementation of the modular arithmetic so that one and the same software function can be used for operands of different length. To demonstrate the performance of MoTE-ECC, we take (ephemeral) ECDH key exchange between two nodes as example, which requires each node to execute two scalar multiplications. The first scalar multiplication is performed on a fixed base point (to generate a key pair), whereas the second scalar multiplication gets an arbitrary point as input. Our implementation uses a fixed-base comb method on a twisted Edwards curve for the former and a simple ladder approach on a birationally-equivalent Montgomery curve for the latter. Both scalar multiplications require about 9*10^6 clock cycles in total and occupy only 380 bytes in RAM when the underlying OPF has a length of 160 bits. We also describe our efforts to harden MoTE-ECC against side-channel attacks (e.g. simple power analysis) and introduce a highly regular implementation of the comb method