State of the Art Computational Ternary Logic Currnent-Mode Circuits Based on CNTFET Technology

Computational operations are considered as a time-consuming and important operation in ALU. These circuits play major role in computational operation in processing unit. This paper presents new computational Ternary Current Mode Circuits including comparator, multiplexer, decoder, and exclusive OR by means of Carbon NanoTube Field Effect Transistors. The new designs rely on three major parts: 1) the input currents which are converted to voltage; 2) threshold detectors; and 3) the output current flow paths to generate the outputs. The designs have been simulated based on 32nm CNFTET using Synopsys Hspice simulator

Design and Implementation of General Hardware Binary Multiplier (2nx 2n) Bits

In this paper, a new general 2n x 2n bits hardware multiplier based on combinatorial has been designed, implemented and analysed. First, a new design for circuit to multiply two binary numbers with 2n bits length, this new design starts with basic 2x2 bits circuit multiplier, n here equal to 1. Then based on this circuit, the 4x4 bits circuit multiplier has been designed. And based on 4x4, the 8x8 bits multiplier has been designed and continually the 16x16 bits multiplier. The final design for general 2nx2n bits multiplier has been presented. All these circuits have been mathematically proved and tested to get the final results

MFPA: Mixed-Signal Field Programmable Array for Energy-Aware Compressive Signal Processing

Compressive Sensing (CS) is a signal processing technique which reduces the number of samples taken per frame to decrease energy, storage, and data transmission overheads, as well as reducing time taken for data acquisition in time-critical applications. The tradeoff in such an approach is increased complexity of signal reconstruction. While several algorithms have been developed for CS signal reconstruction, hardware implementation of these algorithms is still an area of active research. Prior work has sought to utilize parallelism available in reconstruction algorithms to minimize hardware overheads; however, such approaches are limited by the underlying limitations in CMOS technology. Herein, the MFPA (Mixed-signal Field Programmable Array) approach is presented as a hybrid spin-CMOS reconfigurable fabric specifically designed for implementation of CS data sampling and signal reconstruction. The resulting fabric consists of 1) slice-organized analog blocks providing amplifiers, transistors, capacitors, and Magnetic Tunnel Junctions (MTJs) which are configurable to achieving square/square root operations required for calculating vector norms, 2) digital functional blocks which feature 6-input clockless lookup tables for computation of matrix inverse, and 3) an MRAM-based nonvolatile crossbar array for carrying out low-energy matrix-vector multiplication operations. The various functional blocks are connected via a global interconnect and spin-based analog-to-digital converters. Simulation results demonstrate significant energy and area benefits compared to equivalent CMOS digital implementations for each of the functional blocks used: this includes an 80% reduction in energy and 97% reduction in transistor count for the nonvolatile crossbar array, 80% standby power reduction and 25% reduced area footprint for the clockless lookup tables, and roughly 97% reduction in transistor count for a multiplier built using components from the analog blocks. Moreover, the proposed fabric yields 77% energy reduction compared to CMOS when used to implement CS reconstruction, in addition to latency improvements

Dense implementations of binary cellular nonlinear networks : from CMOS to nanotechnology

This thesis deals with the design and hardware realization of the cellular neural/nonlinear network (CNN)-type processors operating on data in the form of black and white (B/W) images. The ultimate goal is to achieve a very compact yet versatile cell structure that would allow for building a network with a very large spatial resolution. It is very important to be able to implement an array with a great number of cells on a single die. Not only it improves the computational power of the processor, but it might be the enabling factor for new applications as well. Larger resolution can be achieved in two ways. First, the cell functionality and operating principles can be tailored to improve the layout compactness. The other option is to use more advanced fabrication technology – either a newer, further downscaled CMOS process or one of the emerging nanotechnologies. It can be beneficial to realize an array processor as two separate parts – one dedicated for gray-scale and the other for B/W image processing, as their designs can be optimized. For instance, an implementation of a CNN dedicated for B/W image processing can be significantly simplified. When working with binary images only, all coefficients in the template matrix can also be reduced to binary values. In this thesis, such a binary programming scheme is presented as a means to reduce the cell size as well as to provide the circuits composed of emerging nanodevices with an efficient programmability. Digital programming can be very fast and robust, and leads to very compact coefficient circuits. A test structure of a binary-programmable CNN has been designed and implemented with standard 0.18 µm CMOS technology. A single cell occupies only 155 µm2, which corresponds to a cell density of 6451 cells per square millimeter. A variety of templates have been tested and the measured chip performance is discussed. Since the minimum feature size of modern CMOS devices has already entered the nanometer scale, and the limitations of further scaling are projected to be reached within the next decade or so, more and more interest and research activity is attracted by nanotechnology. Investigation of the quantum physics phenomena and development of new devices and circuit concepts, which would allow to overcome the CMOS limitations, is becoming an increasingly important science. A single-electron tunneling (SET) transistor is one of the most attractive nanodevices. While relying on the Coulomb interactions, these devices can be connected directly with a wire or through a coupling capacitance. To develop suitable structures for implementing the binary programming scheme with capacitive couplings, the CNN cell based on the floating gate MOSFET (FG-MOSFET) has been designed. This approach can be considered as a step towards a programmable cell implementation with nanodevices. Capacitively coupled CNN has been simulated and the presented results confirm the proper operation. Therefore, the same circuit strategies have also been applied to the CNN cell designed for SET technology. The cell has been simulated to work well with the binary programming scheme applied. This versatile structure can be implemented either as a pure SET design or as a SET-FET hybrid. In addition to the designs mentioned above, a number of promising nanodevices and emerging circuit architectures are introduced.reviewe

The Logic of Random Pulses: Stochastic Computing.

Recent developments in the field of electronics have produced nano-scale devices whose operation can only be described in probabilistic terms. In contrast with the conventional deterministic computing that has dominated the digital world for decades, we investigate a fundamentally different technique that is probabilistic by nature, namely, stochastic computing (SC). In SC, numbers are represented by bit-streams of 0's and 1's, in which the probability of seeing a 1 denotes the value of the number. The main benefit of SC is that complicated arithmetic computation can be performed by simple logic circuits. For example, a single (logic) AND gate performs multiplication. The dissertation begins with a comprehensive survey of SC and its applications. We highlight its main challenges, which include long computation time and low accuracy, as well as the lack of general design methods. We then address some of the more important challenges. We introduce a new SC design method, called STRAUSS, that generates efficient SC circuits for arbitrary target functions. We then address the problems arising from correlation among stochastic numbers (SNs). In particular, we show that, contrary to general belief, correlation can sometimes serve as a resource in SC design. We also show that unlike conventional circuits, SC circuits can tolerate high error rates and are hence useful in some new applications that involve nondeterministic behavior in the underlying circuitry. Finally, we show how SC's properties can be exploited in the design of an efficient vision chip that is suitable for retinal implants. In particular, we show that SC circuits can directly operate on signals with neural encoding, which eliminates the need for data conversion.PhDComputer Science and EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/113561/1/alaghi_1.pd

Single Electron Devices and Circuit Architectures: Modeling Techniques, Dynamic Characteristics, and Reliability Analysis

The Single Electron (SE) technology is an important approach to enabling further feature size reduction and circuit performance improvement. However, new methods are required for device modeling, circuit behavior description, and reliability analysis with this technology due to its unique operation mechanism. In this thesis, a new macro-model of SE turnstile is developed to describe its physical characteristics for large-scale circuit simulation and design. Based on this model, several novel circuit architectures are proposed and implemented to further demonstrate the advantages of SE technique. The dynamic behavior of SE circuits, which is different from their CMOS counterpart, is also investigated using a statistical method. With the unreliable feature of SE devices in mind, a fast and recursive algorithm is developed to evaluate the reliability of SE logic circuits in a more efficient and effective manner