Traffic Sensitive and Traffic Load Aware Path Selection Algorithm For MMR WIMAX Networks

The recent developments in the broadband wireless access (BWA) communication systems have introduced several major changes to the existing systems. Legacy IEEE 802.16j is one such amendment to the existing IEEE 802.16 WiMAX family. The key modification introduced by 802.16j system is the concept of relay station (RS), which may be used to enhance the system coverage or to make system throughput optimal. The end terminals, subscriber stations (SS) are unchanged in the standard. The overall change pertinent to the system has raised many unresolved issues related to RS and multi-hop relay base station (MR-BS). The selection of path from a SS to MR-BS via a RS is also one of the issues, need to be addressed. The path selection of a SS in both uplink and downlink directions is left open in the standard. It is very significant to satisfy the traffics of stringent quality of service (QoS) requirements and to appropriately manage the resources of a cell under different circumstances. This paper proposes a path selection algorithm to achieve the aforementioned qualities in the network. The path selection metrics include traffic load of the transparent relay station and traffic sensitivity factor of the SS. An extensive simulation work discusses the performance evaluation of the proposed work using QualNet simulator

Connectivity in mobile multihop relay network

Mobile Multihop Relay (MMR) network is an attractive and low-cost solution for expanding service coverage and enhancing throughput of the conventional single hop network. However, mobility of Mobile Station (MS) in MMR network might lead to performance degradation in terms of Quality of Service (QoS). Selecting an appropriate Relay Station (RS) that can support data transmission for high mobility MS to enhance QoS is one of the challenges in MMR network. The main goal of the work is to develop and enhance relay selection mechanisms that can assure continuous connectivity while ensuring QoS in MMR network using NCTUns simulation tools. The approach is to develop and enhance a relay selection for MS with continuous connectivity in non-transparent relay. In this approach, the standard network entry procedure is modified to allow continuous connectivity with reduced signaling messages whenever MS joins RS that is out of Multihop Relay Base Station (MRBS) coverage and the relay selection is based on Signal to Noise Ratio (SNR). The QoS performances of the proposed relay selections are in terms of throughput and average end-to-end (ETE) delay. The findings for the proposed relay selection in non-transparent relay shows that the throughput degradation between low mobility MS (30m/s) and high mobility MS (50m/s) is only about 2.0%. The proposed relay selection mechanisms can be applied in any high mobility multi-tier cellular network

Relay selection in mobile multihop relay network

Mobile Multihop Relay (MMR) network is an attractive and low-cost solution for expanding service coverage and enhancing throughput of the conventional single hop network. However, mobility of Mobile Station (MS) in MMR network might lead to performance degradation in terms of Quality of Service (QoS). Selecting an appropriate Relay Station (RS) that can support data transmission for high mobility MS to enhance QoS is one of the challenges in MMR network. The main goal of the work is to develop and enhance relay selection mechanisms that can assure continuous connectivity while ensuring QoS in MMR network using NCTUns simulation tools. The approach is to develop and enhance relay selection that allows cooperative data transmission in transparent relay that guarantees continuous connectivity. The proposed relay selection defined as Co-ReSL depends on weightage of SNR, α and weightage of Link Expiration Time (LET), β. The QoS performances of the proposed relay selections are in terms of throughput and average end-to-end (ETE) delay. The findings for Co-ReSL shows that at heavy traffic load, throughput increases up to 5.7% and average ETE delay reduces by 7.5% compared to Movement Aware Greedy Forwarding (MAGF) due to cooperative data transmission in selective links. The proposed relay selection mechanisms can be applied in any high mobility multi-tier cellular network

Simulation of Relay modes in IEEE 802.16j Mobile Multi-hop Relay (MMR) WIMAX Networks

Two different relay modes are defined in IEEE 802.16j WIMAX standard: transparent mode and non-transparent mode. The non transparent mode is used to extend the coverage area of base stations, where low cost relay station of equal capacity as that of base station is placed at suitable position. Time taken to accept mobile stations and Bandwidth allocation are main problems in non transparent mode. In this we have studied the IEEE 802.16j standard multi hop relay WIMAX networks. We have used relay stations to extend the coverage of base stations. We have also analyzed the throughput between mobile stations with in the coverage area and outside coverage area of base stations. We have simulated the IEEE 802.16j transparent and non transparent mode multi hop WIMAX relay networks using NCTUns Too

Radio Communications

In the last decades the restless evolution of information and communication technologies (ICT) brought to a deep transformation of our habits. The growth of the Internet and the advances in hardware and software implementations modified our way to communicate and to share information. In this book, an overview of the major issues faced today by researchers in the field of radio communications is given through 35 high quality chapters written by specialists working in universities and research centers all over the world. Various aspects will be deeply discussed: channel modeling, beamforming, multiple antennas, cooperative networks, opportunistic scheduling, advanced admission control, handover management, systems performance assessment, routing issues in mobility conditions, localization, web security. Advanced techniques for the radio resource management will be discussed both in single and multiple radio technologies; either in infrastructure, mesh or ad hoc networks

Multi-cell Coordination Techniques for DL OFDMA Multi-hop Cellular Networks

The main objective of this project is to design coordinated spectrum sharing and reuse techniques among cells with the goal of mitigating interference at the cell edge and enhance the overall system capacity. The performance of the developed algorithm will be evaluated in an 802.16m (WiMAX) environment. In conventional cellular networks, frequency planning is usually considered to keep an acceptable signal-to-interference-plus noise ratio (SINR) level, especially at cell boundaries. Frequency assignations are done under a cell-by-cell basis, without any coordination between them to manage interference. Particularly this approach, however, hampers the system spectral efficiency at low reuse rates. For a specific reuse factor, the system throughput depends highly on the mobile station (MS) distribution and the channel conditions of the users to be served. If users served from different base stations (BS) experience a low level of interference, radio resources may be reused, applying a high reuse factor and thus, increasing the system spectral efficiency. On the other side, if the served users experience large interference, orthogonal transmissions are better and therefore a lower frequency reuse factor should be used. As a consequence, a dynamic reuse factor is preferable over a fixed one. This work addresses the design of joint multi-cell resource allocation and scheduling with coordination among neighbouring base stations (outer coordination) or sectors belonging to the same one (inner coordination) as a way to achieve flexible reuse factors. We propose a convex optimization framework to address the problem of coordinating bandwidth allocation in BS coordination problems. The proposed framework allows for different scheduling policies, which have an impact on the suitability of the reuse factor, since they determine which users have to be served. Therefore, it makes sense to consider the reuse factor as a result of the scheduling decision. To support the proposed techniques the BSs shall be capable of exchanging information with each other (decentralized approach) or with some control element in the back-haul network as an ASN gateway or some self-organization control entity (centralized approach)

Wireless Mesh Networks Based on MBPSO Algorithm to Improvement Throughput

Wireless Mesh Networks can be regarded as a type of communication technology in mesh topology in which wireless nodes interconnect with one another. Wireless Mesh Networks depending on the semi-static configuration in different paths among nodes such as PDR, E2E delay and throughput. This study summarized different types of previous heuristic algorithms in order to adapt with proper algorithm that could solve the issue. Therefore, the main objective of this study is to determine the proper methods, approaches or algorithms that should be adapted to improve the throughput. A Modified Binary Particle Swarm Optimization (MBPSO) approach was adapted to improvements the throughput. Finally, the finding shows that throughput increased by 5.79% from the previous study

Capacity modeling for admission control in WiMAX networks

WiMAX networks support QoS reservation of resources by allowing a new flow to apply for admittance in the system. Thus, there is a need for an accurate estimation of the available capacity to be shared by incoming connections. Admission control algorithm must ensure that, when a new QoS resource reservation is accepted, reservations already present in the system continue having their QoS guarantees honored. Its efficiency is then expressed in terms of accuracy and computational complexity which is the focus of the work in this thesis. Different approaches are presented to compute the aggregated allocated capacity in WiMAX networks and, based on their limitations, the E-Diophantine solution has been proposed. The mathematical foundations for the designed approach are provided along with the performance improvements to be expected, both in accuracy and computational terms, as compared to three alternatives of increasing complexity. The different solutions considered are validated and evaluated with OPNET’s WiMAX simulator in a realistic scenario. Finally, the multi-hop relay case is analyzed: a capacity model description is provided together with a conjectured reuse of the admission control algorithm designed