Frame synchronization for PSAM in AWGN and Rayleigh fading channels

Pilot Symbol Assisted Modulation (PSAM) is a good method to compensate for the channel fading effect in wireless mobile communications. In PSAM, known pilot symbols are periodically inserted into the transmitted data symbol stream and the receiver uses these symbols to derive amplitude and phase reference. One aspect of this procedure, which has not received much attention yet, is the frame synchronization, i.e. the method used by the receiver to locate the time position of the pilot symbols. In this study, two novel non-coherent frame synchronization methods are introduced in which only the magnitude of received signal is used to obtain the timing of the pilot symbol. The methods are evaluated for both AWGN and frequency non-selective slow Rayleigh fading channels. One synchronization technique is derived by standard maximum likelihood (ML) estimation formulation, and the other is obtained by using maximum a Posteriori probability (MAP) with a threshold test. Signal processing in the receiver uses simplifying approximations that rely on relatively high signal-to-noise ratio (SNR) as consistent with the reception of 16-QAM. Computer simulation has been used to test the acquisition time performance and the probability of false acquisition. Several lengths and patterns of pilot symbol sequences were tested where every 10th symbol was a pilot symbol and all other symbols were randomly selected data symbols. When compared with the other published synchronizers, results from this study show better performance in both AWGN and fading channels. Significantly better performance is observed in the presence of receiver frequency offsets

Error relilient video communications using high level M-QAM. Modelling and simulation of a comparative analysis of a dual-priority M-QAM transmission system for H.264/AVC video applications over band-limited and error-phone channels.

An experimental investigation of an M level (M = 16, 64 and 256) Quadrature Amplitude Modulation (QAM) transmission system suitable for video transmission is presented. The communication system is based on layered video coding and unequal error protection to make the video bitstream robust to channel errors. An implementation is described in which H.264 video is protected unequally by partitioning the compressed data into two layers of different visual importance. The partition scheme is based on a separation of the group of pictures (GoP) in the intra-coded frame (I-frame) and predictive coded frame (P frame). This partition scheme is then applied to split the H.264-coded video bitstream and is suitable for Constant Bit Rate (CBR) transmission. Unequal error protection is based on uniform and non-uniform M-QAM constellations in conjunction with different scenarios of splitting the transmitted symbol for protection of the more important information of the video data; different constellation arrangements are proposed and evaluated to increase the capacity of the high priority layer. The performance of the transmission system is evaluated under Additive White Gaussian Noise (AWGN) and Rayleigh fading conditions. Simulation results showed that in noisy channels the decoded video can be improved by assigning a larger portion of the video data to the enhancement layer in conjunction with non-uniform constellation arrangements; in better channel conditions the quality of the received video can be improved by assigning more bits in the high priority channel and using uniform constellations. The aforementioned varying conditions can make the video transmission more successful over error-prone channels. Further techniques were developed to combat various channel impairments by considering channel coding methods suitable for layered video coding applications. It is shown that a combination of non-uniform M-QAM and forward error correction (FEC) will yield a better performance. Additionally, antenna diversity techniques are examined and introduced to the transmission system that can offer a significant improvement in the quality of service of mobile video communication systems in environments that can be modelled by a Rayleigh fading channel

Near-capacity MIMOs using iterative detection

In this thesis, Multiple-Input Multiple-Output (MIMO) techniques designed for transmission over narrowband Rayleigh fading channels are investigated. Specifically, in order to providea diversity gain while eliminating the complexity of MIMO channel estimation, a Differential Space-Time Spreading (DSTS) scheme is designed that employs non-coherent detection. Additionally, in order to maximise the coding advantage of DSTS, it is combined with Sphere Packing (SP) modulation. The related capacity analysis shows that the DSTS-SP scheme exhibits a higher capacity than its counterpart dispensing with SP. Furthermore, in order to attain additional performance gains, the DSTS system invokes iterative detection, where the outer code is constituted by a Recursive Systematic Convolutional (RSC) code, while the inner code is a SP demapper in one of the prototype systems investigated, while the other scheme employs a Unity Rate Code (URC) as its inner code in order to eliminate the error floor exhibited by the system dispensing with URC. EXIT charts are used to analyse the convergence behaviour of the iteratively detected schemes and a novel technique is proposed for computing the maximum achievable rate of the system based on EXIT charts. Explicitly, the four-antenna-aided DSTSSP system employing no URC precoding attains a coding gain of 12 dB at a BER of 10-5 and performs within 1.82 dB from the maximum achievable rate limit. By contrast, the URC aidedprecoded system operates within 0.92 dB from the same limit.On the other hand, in order to maximise the DSTS system’s throughput, an adaptive DSTSSP scheme is proposed that exploits the advantages of differential encoding, iterative decoding as well as SP modulation. The achievable integrity and bit rate enhancements of the system are determined by the following factors: the specific MIMO configuration used for transmitting data from the four antennas, the spreading factor used and the RSC encoder’s code rate.Additionally, multi-functional MIMO techniques are designed to provide diversity gains, multiplexing gains and beamforming gains by combining the benefits of space-time codes, VBLASTand beamforming. First, a system employing Nt=4 transmit Antenna Arrays (AA) with LAA number of elements per AA and Nr=4 receive antennas is proposed, which is referred to as a Layered Steered Space-Time Code (LSSTC). Three iteratively detected near-capacity LSSTC-SP receiver structures are proposed, which differ in the number of inner iterations employed between the inner decoder and the SP demapper as well as in the choice of the outer code, which is either an RSC code or an Irregular Convolutional Code (IrCC). The three systems are capable of operating within 0.9, 0.4 and 0.6 dB from the maximum achievable rate limit of the system. A comparison between the three iteratively-detected schemes reveals that a carefully designed two-stage iterative detection scheme is capable of operating sufficiently close to capacity at a lower complexity, when compared to a three-stage system employing a RSC or a two-stage system using an IrCC as an outer code. On the other hand, in order to allow the LSSTC scheme to employ less receive antennas than transmit antennas, while still accommodating multiple users, a Layered Steered Space-Time Spreading (LSSTS) scheme is proposed that combines the benefits of space-time spreading, V-BLAST, beamforming and generalised MC DS-CDMA. Furthermore, iteratively detected LSSTS schemes are presented and an LLR post-processing technique is proposed in order to improve the attainable performance of the iteratively detected LSSTS system.Finally, a distributed turbo coding scheme is proposed that combines the benefits of turbo coding and cooperative communication, where iterative detection is employed by exchanging extrinsic information between the decoders of different single-antenna-aided users. Specifically, the effect of the errors induced in the first phase of cooperation, where the two users exchange their data, on the performance of the uplink in studied, while considering different fading channel characteristics

Information-theoretic analysis of a family of additive energy channels

This dissertation studies a new family of channel models for non-coherent com- munications, the additive energy channels. By construction, the additive en- ergy channels occupy an intermediate region between two widely used channel models: the discrete-time Gaussian channel, used to represent coherent com- munication systems operating at radio and microwave frequencies, and the discrete-time Poisson channel, which often appears in the analysis of intensity- modulated systems working at optical frequencies. The additive energy chan- nels share with the Gaussian channel the additivity between a useful signal and a noise component. However, the signal and noise components are not complex- valued quadrature amplitudes but, as in the Poisson channel, non-negative real numbers, the energy or squared modulus of the complex amplitude. The additive energy channels come in two variants, depending on whether the channel output is discrete or continuous. In the former case, the energy is a multiple of a fundamental unit, the quantum of energy, whereas in the second the value of the energy can take on any non-negative real number. For con- tinuous output the additive noise has an exponential density, as for the energy of a sample of complex Gaussian noise. For discrete, or quantized, energy the signal component is randomly distributed according to a Poisson distribution whose mean is the signal energy of the corresponding Gaussian channel; part of the total noise at the channel output is thus a signal-dependent, Poisson noise component. Moreover, the additive noise has a geometric distribution, the discrete counterpart of the exponential density. Contrary to the common engineering wisdom that not using the quadrature amplitude incurs in a signi¯cant performance penalty, it is shown in this dis- sertation that the capacity of the additive energy channels essentially coincides with that of a coherent Gaussian model under a broad set of circumstances. Moreover, common modulation and coding techniques for the Gaussian chan- nel often admit a natural extension to the additive energy channels, and their performance frequently parallels those of the Gaussian channel methods. Four information-theoretic quantities, covering both theoretical and practi- cal aspects of the reliable transmission of information, are studied: the channel capacity, the minimum energy per bit, the constrained capacity when a given digital modulation format is used, and the pairwise error probability. Of these quantities, the channel capacity sets a fundamental limit on the transmission capabilities of the channel but is sometimes di±cult to determine. The min- imum energy per bit (or its inverse, the capacity per unit cost), on the other hand, turns out to be easier to determine, and may be used to analyze the performance of systems operating at low levels of signal energy. Closer to a practical ¯gure of merit is the constrained capacity, which estimates the largest amount of information which can be transmitted by using a speci¯c digital modulation format. Its study is complemented by the computation of the pairwise error probability, an e®ective tool to estimate the performance of practical coded communication systems. Regarding the channel capacity, the capacity of the continuous additive energy channel is found to coincide with that of a Gaussian channel with iden- tical signal-to-noise ratio. Also, an upper bound |the tightest known| to the capacity of the discrete-time Poisson channel is derived. The capacity of the quantized additive energy channel is shown to have two distinct functional forms: if additive noise is dominant, the capacity is close to that of the continu- ous channel with the same energy and noise levels; when Poisson noise prevails, the capacity is similar to that of a discrete-time Poisson channel, with no ad- ditive noise. An analogy with radiation channels of an arbitrary frequency, for which the quanta of energy are photons, is presented. Additive noise is found to be dominant when frequency is low and, simultaneously, the signal-to-noise ratio lies below a threshold; the value of this threshold is well approximated by the expected number of quanta of additive noise. As for the minimum energy per nat (1 nat is log2 e bits, or about 1.4427 bits), it equals the average energy of the additive noise component for all the stud- ied channel models. A similar result was previously known to hold for two particular cases, namely the discrete-time Gaussian and Poisson channels. An extension of digital modulation methods from the Gaussian channels to the additive energy channel is presented, and their constrained capacity determined. Special attention is paid to their asymptotic form of the capacity at low and high levels of signal energy. In contrast to the behaviour in the vi Gaussian channel, arbitrary modulation formats do not achieve the minimum energy per bit at low signal energy. Analytic expressions for the constrained capacity at low signal energy levels are provided. In the high-energy limit simple pulse-energy modulations, which achieve a larger constrained capacity than their counterparts for the Gaussian channel, are presented. As a ¯nal element, the error probability of binary channel codes in the ad- ditive energy channels is studied by analyzing the pairwise error probability, the probability of wrong decision between two alternative binary codewords. Saddlepoint approximations to the pairwise error probability are given, both for binary modulation and for bit-interleaved coded modulation, a simple and e±cient method to use binary codes with non-binary modulations. The meth- ods yield new simple approximations to the error probability in the fading Gaussian channel. The error rates in the continuous additive energy channel are close to those of coherent transmission at identical signal-to-noise ratio. Constellations minimizing the pairwise error probability in the additive energy channels are presented, and their form compared to that of the constellations which maximize the constrained capacity at high signal energy levels

Self-concatenated coding for wireless communication systems

In this thesis, we have explored self-concatenated coding schemes that are designed for transmission over Additive White Gaussian Noise (AWGN) and uncorrelated Rayleigh fading channels. We designed both the symbol-based Self-ConcatenatedCodes considered using Trellis Coded Modulation (SECTCM) and bit-based Self- Concatenated Convolutional Codes (SECCC) using a Recursive Systematic Convolutional (RSC) encoder as constituent codes, respectively. The design of these codes was carried out with the aid of Extrinsic Information Transfer (EXIT) charts. The EXIT chart based design has been found an efficient tool in finding the decoding convergence threshold of the constituent codes. Additionally, in order to recover the information loss imposed by employing binary rather than non-binary schemes, a soft decision demapper was introduced in order to exchange extrinsic information withthe SECCC decoder. To analyse this information exchange 3D-EXIT chart analysis was invoked for visualizing the extrinsic information exchange between the proposed Iteratively Decoding aided SECCC and soft-decision demapper (SECCC-ID). Some of the proposed SECTCM, SECCC and SECCC-ID schemes perform within about 1 dB from the AWGN and Rayleigh fading channels’ capacity. A union bound analysis of SECCC codes was carried out to find the corresponding Bit Error Ratio (BER) floors. The union bound of SECCCs was derived for communications over both AWGN and uncorrelated Rayleigh fading channels, based on a novel interleaver concept.Application of SECCCs in both UltraWideBand (UWB) and state-of-the-art video-telephone schemes demonstrated its practical benefits.In order to further exploit the benefits of the low complexity design offered by SECCCs we explored their application in a distributed coding scheme designed for cooperative communications, where iterative detection is employed by exchanging extrinsic information between the decoders of SECCC and RSC at the destination. In the first transmission period of cooperation, the relay receives the potentially erroneous data and attempts to recover the information. The recovered information is then re-encoded at the relay using an RSC encoder. In the second transmission period this information is then retransmitted to the destination. The resultant symbols transmitted from the source and relay nodes can be viewed as the coded symbols of a three-component parallel-concatenated encoder. At the destination a Distributed Binary Self-Concatenated Coding scheme using Iterative Decoding (DSECCC-ID) was employed, where the two decoders (SECCC and RSC) exchange their extrinsic information. It was shown that the DSECCC-ID is a low-complexity scheme, yet capable of approaching the Discrete-input Continuous-output Memoryless Channels’s (DCMC) capacity.Finally, we considered coding schemes designed for two nodes communicating with each other with the aid of a relay node, where the relay receives information from the two nodes in the first transmission period. At the relay node we combine a powerful Superposition Coding (SPC) scheme with SECCC. It is assumed that decoding errors may be encountered at the relay node. The relay node then broadcasts this information in the second transmission period after re-encoding it, again, using a SECCC encoder. At the destination, the amalgamated block of Successive Interference Cancellation (SIC) scheme combined with SECCC then detects and decodes the signal either with or without the aid of a priori information. Our simulation results demonstrate that the proposed scheme is capable of reliably operating at a low BER for transmission over both AWGN and uncorrelated Rayleigh fading channels. We compare the proposed scheme’s performance to a direct transmission link between the two sources having the same throughput