Estimation of load sharing among muscles acting on the same joint and Applications of surface electromyography

The force produced by a specific muscle cannot be measured and what is measured is the total force provided by all the active muscles acting on a joint, including agonists and antagonists. The first part of this work (chapter 3) addresses the issue of load sharing by proposing two possible approaches and testing them. The second part (chapter 4 and 5) addresses two applications of surface EMG focusing on the study of a) muscle relaxation associated to Yoga sessions and b) the activation of muscle of the back and shoulder of musicians playing string instruments (violin, viola and cello). In both parts the element of innovation is the use of two dimensional electrode arrays and of techniques based on EMG Imaging. The objectives of this work are presented and explained in chapter 1 while the basic concepts of surface EMG are summarized in chapter 2. Different EMG-based muscle force models found in the literature are explained and discussed. Two renowned amplitude indicators in surface EMG (sEMG) studies are the average rectified value (ARV) and the root mean square (RMS). These two amplitude indicators are computed over a defined time window of the recorded signals to represent the muscle activity. The advantages and disadvantages of RMS and ARV are compared and discussed for a simple sinusoid as well as for more complex signals (simulated motor unit action potential detected by high density electrode grid). The results show that RMS is more robust to the sampling frequency than ARV. In this thesis, starting from the simulation of a single fiber and of a group of fibers (motor unit), it is shown that inter electrode distance (IED) greater than10 mm causes aliasing. Aliasing is a source of error in sEMG map interpretation or decisions that are made by automatic algorithms such as those providing image segmentation for the identifications of regions of interest. Chapter 2 discusses three segmentation algorithms (K-means, h-dome, watershed) and compares them in order to find the most suitable method. Results reveal that among the three mentioned algorithms, watershed provides most accurate segmentation for the simulated ARV maps. Chapter 3 presents a mathematical model that is associated to the monotonic Force-EMG relation. A possible non-linear relationship between the EMG and force or torque is presented. A system of "M" equations is obtained by performing "M" measurements at "M" different force levels in isometric conditions. The solutions of such system of equations are the values for each muscles. Two different approaches were investigated for finding the solutions of the system, which are: a) Analytical-Graphical Approach (AGA) and b) Numerical Approach (NA) consisting of error minimization (between the total estimated and measured force) applying optimization algorithms. The AGA was used to find the model parameters of each muscle contributing to the force production on a joint by finding the intersection of those surfaces that can be obtained from sequential substitutions of the model parameters in the equations corresponding to each contraction level. In simulation studies, the AGA graphically shows that there is more than one solution to the load sharing problem even for the simplest theoretical case (i.e. a joint spanned by only two muscles). The second approach, based on minimization of the mean square error between the measured and the total estimated force or torque (with "N" muscles involved) provides an estimate of the model parameters that in turn provides the force contributions of the individual muscles. The optimization algorithms can find the solutions of our system made of non-linear equations (see chapter 3). Starting from different point (initial conditions), different solutions can be found, as predicted by the AGA approach for the two-muscle case. The main conclusion of this study is that the load sharing strategy is not unique. Chapter 4 discusses the application of surface electromyography to a single case study of Yoga relaxation to show the feasibility of measurements. The effect of yoga relaxation on muscle activity (sEMG amplitude), as well as on mean and median frequencies and muscle fiber's conduction Velocity, is discussed in this chapter. No changes in the sEMG activity pattern distribution were found for the same task performed before and after applying yoga relaxation technique. However, myoelectric manifestations of fatigue were smaller after relaxation and returned to the normal pattern after the recovery phase from relaxation. Further studies are justified. Chapter 5 describes results and discusses the spatial distribution of muscle activity over the Trapezius and Erector Spinae muscles of musicians playing string instruments. In chapter 5, the effect of backrest support in sitting position during playing cello, viola, and violin on the muscle activity index of upper and lower Trapezius muscle of the bowing arm, upper Trapezius muscle of non-bowing arm, left and right Erector Spinae muscles is investigated. Two professional players (one cello and one viola) and five student players (one cello, three violin and one viola) participated in this study. The muscle activity index (MAI) was defined as the spatial average of RMS values of the muscle active region detected by watershed segmentation for Trapezius muscles (left and right), and thresholding technique (70% of the maximum value) for left and right Erector Spinae muscles. It was found that the MAI is string (note) dependent. Statistical difference (p < 0:05) between the MAIs of left Erector Spinae muscle during playing with and without backrest support was observed in four (out of five) student players. No statistical differences were observed on the muscle activity of Trapezius (bowing and no-bowing arms) during playing with and without backrest support in different types of bowing for all musicians. In conclusion, this work addresses a) the issue of spatial sampling and segmentation of sEMG using 2D electrode arrays, b) two possible approaches to the load-sharing issue, c) a single-case study of Yoga relaxation and d) the distribution of muscle activity above the Trapezius and Erector Spinae muscles of musicians playing string instruments. Previously unavailable knowledge has been achieved in all these four studies

Classification of EMG signals to control a prosthetic hand using time-frequesncy representations and Support Vector Machines

Myoelectric signals (MES) are viable control signals for externally-powered prosthetic devices. They may improve both the functionality and the cosmetic appearance of these devices. Conventional controllers, based on the signal\u27s amplitude features in the control strategy, lack a large number of controllable states because signals from independent muscles are required for each degree of freedom (DoF) of the device. Myoelectric pattern recognition systems can overcome this problem by discriminating different residual muscle movements instead of contraction levels of individual muscles. However, the lack of long-term robustness in these systems and the design of counter-intuitive control/command interfaces have resulted in low clinical acceptance levels. As a result, the development of robust, easy to use myoelectric pattern recognition-based control systems is the main challenge in the field of prosthetic control. This dissertation addresses the need to improve the controller\u27s robustness by designing a pattern recognition-based control system that classifies the user\u27s intention to actuate the prosthesis. This system is part of a cost-effective prosthetic hand prototype developed to achieve an acceptable level of functional dexterity using a simple to use interface. A Support Vector Machine (SVM) classifier implemented as a directed acyclic graph (DAG) was created. It used wavelet features from multiple surface EMG channels strategically placed over five forearm muscles. The classifiers were evaluated across seven subjects. They were able to discriminate five wrist motions with an accuracy of 91.5%. Variations of electrode locations were artificially introduced at each recording session as part of the procedure, to obtain data that accounted for the changes in the user\u27s muscle patterns over time. The generalization ability of the SVM was able to capture most of the variability in the data and to maintain an average classification accuracy of 90%. Two principal component analysis (PCA) frameworks were also evaluated to study the relationship between EMG recording sites and the need for feature space reduction. The dimension of the new feature set was reduced with the goal of improving the classification accuracy and reducing the computation time. The analysis indicated that the projection of the wavelet features into a reduced feature space did not significantly improve the accuracy and the computation time. However, decreasing the number of wavelet decomposition levels did lower the computational load without compromising the average signal classification accuracy. Based on the results of this work, a myoelectric pattern recognition-based control system that uses an SVM classifier applied to time-frequency features may be used to discriminate muscle contraction patterns for prosthetic applications

Entropy in Image Analysis II

Image analysis is a fundamental task for any application where extracting information from images is required. The analysis requires highly sophisticated numerical and analytical methods, particularly for those applications in medicine, security, and other fields where the results of the processing consist of data of vital importance. This fact is evident from all the articles composing the Special Issue "Entropy in Image Analysis II", in which the authors used widely tested methods to verify their results. In the process of reading the present volume, the reader will appreciate the richness of their methods and applications, in particular for medical imaging and image security, and a remarkable cross-fertilization among the proposed research areas

A Comprehensive Survey on Particle Swarm Optimization Algorithm and Its Applications

Particle swarm optimization (PSO) is a heuristic global optimization method, proposed originally by Kennedy and Eberhart in 1995. It is now one of the most commonly used optimization techniques. This survey presented a comprehensive investigation of PSO. On one hand, we provided advances with PSO, including its modifications (including quantum-behaved PSO, bare-bones PSO, chaotic PSO, and fuzzy PSO), population topology (as fully connected, von Neumann, ring, star, random, etc.), hybridization (with genetic algorithm, simulated annealing, Tabu search, artificial immune system, ant colony algorithm, artificial bee colony, differential evolution, harmonic search, and biogeography-based optimization), extensions (to multiobjective, constrained, discrete, and binary optimization), theoretical analysis (parameter selection and tuning, and convergence analysis), and parallel implementation (in multicore, multiprocessor, GPU, and cloud computing forms). On the other hand, we offered a survey on applications of PSO to the following eight fields: electrical and electronic engineering, automation control systems, communication theory, operations research, mechanical engineering, fuel and energy, medicine, chemistry, and biology. It is hoped that this survey would be beneficial for the researchers studying PSO algorithms

A Review of the Teaching and Learning on Power Electronics Course

—In this review, we describe various kinds of problem and solution related teaching and learning on power electronics course all around the world. The method was used the study of literature on journal articles and proceedings published by reputable international organizations. Thirtynine papers were obtained using Boolean operators, according to the specified criteria. The results of the problems generally established that student learning motivation was low, teaching approaches that are still teacher-centered, the scope of the curriculum extends, and the physical limitations of laboratory equipment. The solutions offered are very diverse ranging from models, strategies, methods and learning techniques supported by information and communication technology

Applications of EMG in Clinical and Sports Medicine

This second of two volumes on EMG (Electromyography) covers a wide range of clinical applications, as a complement to the methods discussed in volume 1. Topics range from gait and vibration analysis, through posture and falls prevention, to biofeedback in the treatment of neurologic swallowing impairment. The volume includes sections on back care, sports and performance medicine, gynecology/urology and orofacial function. Authors describe the procedures for their experimental studies with detailed and clear illustrations and references to the literature. The limitations of SEMG measures and methods for careful analysis are discussed. This broad compilation of articles discussing the use of EMG in both clinical and research applications demonstrates the utility of the method as a tool in a wide variety of disciplines and clinical fields

EMG Signal Decomposition Using Motor Unit Potential Train Validity

Electromyographic (EMG) signal decomposition is the process of resolving an EMG signal into its component motor unit potential trains (MUPTs). The extracted MUPTs can aid in the diagnosis of neuromuscular disorders and the study of the neural control of movement, but only if they are valid trains. Before using decomposition results and the motor unit potential (MUP) shape and motor unit (MU) firing pattern information related to each active MU for either clinical or research purposes the fact that the extracted MUPTs are valid needs to be confirmed. The existing MUPT validation methods are either time consuming or related to operator experience and skill. More importantly, they cannot be executed during automatic decomposition of EMG signals to assist with improving decomposition results. To overcome these issues, in this thesis the possibility of developing automatic MUPT validation algorithms has been explored. Several methods based on a combination of feature extraction techniques, cluster validation methods, supervised classification algorithms, and multiple classifier fusion techniques were developed. The developed methods, in general, use either the MU firing pattern or MUP-shape consistency of a MUPT, or both, to estimate its overall validity. The performance of the developed systems was evaluated using a variety of MUPTs obtained from the decomposition of several simulated and real intramuscular EMG signals. Based on the results achieved, the methods that use only shape or only firing pattern information had higher generalization error than the systems that use both types of information. For the classifiers that use MU firing pattern information of a MUPT to determine its validity, the accuracy for invalid trains decreases as the number of missed-classification errors in trains increases. Likewise, for the methods that use MUP-shape information of a MUPT to determine its validity, the classification accuracy for invalid trains decreases as the within-train similarity of the invalid trains increase. Of the systems that use both shape and firing pattern information, those that separately estimate MU firing pattern validity and MUP-shape validity and then estimate the overall validity of a train by fusing these two indices using trainable fusion methods performed better than the single classifier scheme that estimates MUPT validity using a single classifier, especially for the real data used. Overall, the multi-classifier constructed using trainable logistic regression to aggregate base classifier outputs had the best performance with overall accuracy of 99.4% and 98.8% for simulated and real data, respectively. The possibility of formulating an algorithm for automated editing MUPTs contaminated with a high number of false-classification errors (FCEs) during decomposition was also investigated. Ultimately, a robust method was developed for this purpose. Using a supervised classifier and MU firing pattern information provided by each MUPT, the developed algorithm first determines whether a given train is contaminated by a high number of FCEs and needs to be edited. For contaminated MUPTs, the method uses both MU firing pattern and MUP shape information to detect MUPs that were erroneously assigned to the train. Evaluation based on simulated and real MU firing patterns, shows that contaminated MUPTs could be detected with 84% and 81% accuracy for simulated and real data, respectively. For a given contaminated MUPT, the algorithm on average correctly classified around 92.1% of the MUPs of the MUPT. The effectiveness of using the developed MUPT validation systems and the MUPT editing methods during EMG signal decomposition was investigated by integrating these algorithms into a certainty-based EMG signal decomposition algorithm. Overall, the decomposition accuracy for 32 simulated and 30 real EMG signals was improved by 7.5% (from 86.7% to 94.2%) and 3.4% (from 95.7% to 99.1%), respectively. A significant improvement was also achieved in correctly estimating the number of MUPTs represented in a set of detected MUPs. The simulated and real EMG signals used were comprised of 3–11 and 3–15 MUPTs, respectively