Using real interpolation method for adaptive identification of nonlinear inverted pendulum system

In this paper, we investigate the inverted pendulum system by using real interpolation method (RIM) algorithm. In the first stage, the mathematical model of the inverted pendulum system and the RIM algorithm are presented. After that, the identification of the inverted pendulum system by using the RIM algorithm is proposed. Finally, the comparison of the linear analytical model, RIM model, and nonlinear model is carried out. From the results, it is found that the inverted pendulum system by using RIM algorithm has simplicity, low computer source requirement, high accuracy and adaptiveness in the advantages

Model-free controller design for nonlinear underactuated systems with uncertainties and disturbances by using extended state observer based chattering-free sliding mode control

MakaleWOS:000912458400001Most of the control strategies require a mathematical model or reasonable knowledge that is difficult to obtain for complex systems. Model-free control is a good alternative to avoid the difficulties and complex modeling procedures, especially if the knowledge about the system is insufficient. This paper presents a new control scheme completely independent of the system model. The proposed scheme combines sliding mode control (SMC) with intelligent proportional integral derivative (iPID) control based on a local model and extended state observer (ESO). Although the iPID control makes the proposed method model-free, it cannot guarantee that the tracking errors converge to zero asymptotically except the system is in a steady-state regime. Therefore, the SMC is added to the control scheme to ensure the convergence by minimizing the estimation errors of the observer. The proposed iPIDSMC controller is tested in the presence of different parameter variations and external disturbances on an inverted pendulum - cart (IPC), which is a highly unstable underactuated system with nonlinear coupled dynamics. The proposed controller is compared with the PID, iPID and Hierarchical Sliding Mode Control (HSMC) for a clearer evaluation. Simulation results showed that the proposed controller is extremely insensitive to parameter variations, matched and mismatched disturbances and the control signal of the proposed method is chattering-free, even though it is based on a discontinuous control action

Design Nonlinear Model Reference with Fuzzy Controller for Nonlinear SISO Second Order Systems

Model reference controller is considering as one of the most useful controller to specific performance of systems where the desired output is produced for a given input. This system used the difference between the outputs of the plant and the desired model by comparing them to produce the signals of the control. This paper focus on design a model reference controller (MRC) combined with (type-1 and interval type-2) fuzzy control scheme for single input-single output (SISO) systems under uncertainty and external disturbance. The model reference controller is designed firstly without fuzzy scheme based on an optimal desired model and Lyapunov stability theory. Then a (type-1 and Interval type-2) fuzzy controller Takagi-Sugeno type is combine with the suggested MRC in order to enhance the performer of it, the common parts between the two fuzzy systems such as: fuzzifier, inference engine, fuzzy rule-base and defuzzifier are illustrated. In this paper the proposed controller is applied to controla (SISO) inverted pendulum sustem and the Matlab R2015 software is used to carry out two simulation cases for the overall controlled scheme. The obtained results for the two cases show that the proposed MRC with both fuzzy control schemes have acceptable performance, but it have better performance with the interval type-2 fuzzy scheme

An Application of Modified T2FHC Algorithm in Two-Link Robot Controller

Parallel robotic systems have shown their advantages over the traditional serial robots such as high payload capacity, high speed, and high precision. Their applications are widespread from transportation to manufacturing fields. Therefore, most of the recent studies in parallel robots focus on finding the best method to improve the system accuracy. Enhancing this metric, however, is still the biggest challenge in controlling a parallel robot owing to the complex mathematical model of the system. In this paper, we present a novel solution to this problem with a Type 2 Fuzzy Coherent Controller Network (T2FHC), which is composed of a Type 2 Cerebellar Model Coupling Controller (CMAC) with its fast convergence ability and a Brain Emotional Learning Controller (BELC) using the Lyaponov-based weight updating rule. In addition, the T2FHC is combined with a surface generator to increase the system flexibility. To evaluate its applicability in real life, the proposed controller was tested on a Quanser 2-DOF robot system in three case studies: no load, 180 g load and 360 g load, respectively. The results showed that the proposed structure achieved superior performance compared to those of available algorithms such as CMAC and Novel Self-Organizing Fuzzy CMAC (NSOF CMAC). The Root Mean Square Error (RMSE) index of the system that was 2.20E-06 for angle A and 2.26E-06 for angle B and the tracking error that was -6.42E-04 for angle A and 2.27E-04 for angle B demonstrate the good stability and high accuracy of the proposed T2FHC. With this outstanding achievement, the proposed method is promising to be applied to many applications using nonlinear systems