Neural networks for improved target differentiation and localization with sonar

Cataloged from PDF version of article.This study investigates the processing of sonar signals using neural networks for robust differentiation of commonly encountered features in indoor robot environments. Differentiation of such features is of interest for intelligent systems in a variety of applications. Different representations of amplitude and time-of-¯ight measurement patterns acquired from a real sonar system are processed. In most cases, best results are obtained with the low-frequency component of the discrete wavelet transform of these patterns. Modular and non-modular neural network structures trained with the back-propagation and generating±shrinking algorithms are used to incorporate learning in the identi®cation of parameter relations for target primitives. Networks trained with the generating±shrinking algorithm demonstrate better generalization and interpolation capability and faster convergence rate. Neural networks can differentiate more targets employing only a single sensor node, with a higher correct differentiation percentage (99%) than achieved with previously reported methods (61±90%) employing multiple sensor nodes. A sensor node is a pair of transducers with ®xed separation, that can rotate and scan the target to collect data. Had the number of sensing nodes been reduced in the other methods, their performance would have been even worse. The success of the neural network approach shows that the sonar signals do contain suf®cient information to differentiate all target types, but the previously reported methods are unable to resolve this identifying information. This work can ®nd application in areas where recognition of patterns hidden in sonar signals is required. Some examples are system control based on acoustic signal detection and identi®cation, map building, navigation, obstacle avoidance, and target-tracking applications for mobile robots and other intelligent systems. q 2001 Elsevier Science Ltd. All rights reserved

Target classification with simple infrared sensors using artificial neural networks

This study investigates the use of low-cost infrared (IR) sensors for the determination of geometry and surface properties of commonly encountered features or targets in indoor environments, such as planes, corners, edges, and cylinders using artificial neural networks (ANNs). The intensity measurements obtained from such sensors are highly dependent on the location, geometry, and surface properties of the reflecting target in a way which cannot be represented by a simple analytical relationship, therefore complicating the localization and classification process. We propose the use of angular intensity scans and feature vectors obtained by modeling of angular intensity scans and present two different neural network based approaches in order to classify the geometry and/or the surface type of the targets. In the first case, where planes, 90° corners, and 90° edges covered with aluminum, white cloth, and Styrofoam packaging material are differentiated, an average correct classification rate of 78% of both geometry and surface over all target types is achieved. In the second case, where planes, 90° edges, and cylinders covered with different surface materials are differentiated, an average correct classification rate of 99.5% is achieved. The method demonstrated shows that ANNs can be used to extract substantially more information than IR sensors are commonly employed for. © 2008 IEEE

Transform pre-processing for neural networks for object recognition and localization with sonar

We investigate the pre-processing of sonar signals prior to using neural networks for robust differentiation of commonly encountered features in indoor environments. Amplitude and time-of-flight measurement patterns acquired from a real sonar system are pre-processed using various techniques including wavelet transforms, Fourier and fractional Fourier transforms, and Kohonen's self-organizing feature map. Modular and non-modular neural network structures trained with the back-propagation and generating-shrinking algorithms are used to incorporate learning in the identification of parameter relations for target primitives. Networks trained with the generating-shrinking algorithm demonstrate better generalization and interpolation capability and faster convergence rate. The use of neural networks trained with the back-propagation algorithm, usually with fractional Fourier transform or wavelet pre-processing results in near perfect differentiation, around 85% correct range estimation and around 95% correct azimuth estimation, which would be satisfactory in a wide range of applications. Neural networks can differentiate more targets, employing only a single sensor node, with a higher correct differentiation percentage than achieved with previously reported methods employing multiple sensor nodes. The success of the neural network approach shows that the sonar signals do contain sufficient information to differentiate a considerable number of target types, but the previously reported methods are unable to resolve this identifying information. This work can find application in areas where recognition of patterns hidden in sonar signals is required. Some examples are system control based on acoustic signal detection and identification, map building, navigation, obstacle avoidance, and target-tracking applications for mobile robots and other intelligent systems

Navigation and Control of Automated Guided Vehicle using Fuzzy Inference System and Neural Network Technique

Automatic motion planning and navigation is the primary task of an Automated Guided Vehicle (AGV) or mobile robot. All such navigation systems consist of a data collection system, a decision making system and a hardware control system. Artificial Intelligence based decision making systems have become increasingly more successful as they are capable of handling large complex calculations and have a good performance under unpredictable and imprecise environments. This research focuses on developing Fuzzy Logic and Neural Network based implementations for the navigation of an AGV by using heading angle and obstacle distances as inputs to generate the velocity and steering angle as output. The Gaussian, Triangular and Trapezoidal membership functions for the Fuzzy Inference System and the Feed forward back propagation were developed, modelled and simulated on MATLAB. The reserach presents an evaluation of the four different decision making systems and a study has been conducted to compare their performances. The hardware control for an AGV should be robust and precise. For practical implementation a prototype, that functions via DC servo motors and a gear systems, was constructed and installed on a commercial vehicle

Reinforcement Learning with Frontier-Based Exploration via Autonomous Environment

Active Simultaneous Localisation and Mapping (SLAM) is a critical problem in autonomous robotics, enabling robots to navigate to new regions while building an accurate model of their surroundings. Visual SLAM is a popular technique that uses virtual elements to enhance the experience. However, existing frontier-based exploration strategies can lead to a non-optimal path in scenarios where there are multiple frontiers with similar distance. This issue can impact the efficiency and accuracy of Visual SLAM, which is crucial for a wide range of robotic applications, such as search and rescue, exploration, and mapping. To address this issue, this research combines both an existing Visual-Graph SLAM known as ExploreORB with reinforcement learning. The proposed algorithm allows the robot to learn and optimize exploration routes through a reward-based system to create an accurate map of the environment with proper frontier selection. Frontier-based exploration is used to detect unexplored areas, while reinforcement learning optimizes the robot's movement by assigning rewards for optimal frontier points. Graph SLAM is then used to integrate the robot's sensory data and build an accurate map of the environment. The proposed algorithm aims to improve the efficiency and accuracy of ExploreORB by optimizing the exploration process of frontiers to build a more accurate map. To evaluate the effectiveness of the proposed approach, experiments will be conducted in various virtual environments using Gazebo, a robot simulation software. Results of these experiments will be compared with existing methods to demonstrate the potential of the proposed approach as an optimal solution for SLAM in autonomous robotics.Comment: 23 pages, Journa

Recognizing targets from infrared intensity scan patterns using artificial neural networks

This study investigates the use of simple, low-cost infrared sensors for the recognition of geometry and surface type of commonly encountered features or targets in indoor environments, such as planes, corners, and edges. The intensity measurements obtained from such sensors are highly dependent on the location, geometry, and surface properties of the reflecting target in a way that cannot be represented by a simple analytical relationship, therefore complicating the localization and recognition process. We employ artificial neural networks to determine the geometry and the surface type of targets and provide experimental verification with three different geometries and three different surface types. The networks are trained with the Levenberg-Marquardt algorithm and pruned with the optimal brain surgeon technique. The geometry and the surface type of targets can be correctly classified with rates of 99 and 78.4%, respectively. An average correct classification rate of 78% is achieved when both geometry and surface type are differentiated. This indicates that the geometrical properties of the targets are more distinctive than their surface properties, and surface determination is the limiting factor in recognizing the patterns. The results demonstrate that processing the data from simple infrared sensors through suitable techniques can help us exploit their full potential and extend their usage beyond well-known applications. © 2009 Society of Photo-Optical Instrumentation Engineers

A hybrid approach to simultaneous localization and mapping in indoors environment

This thesis will present SLAM in the current literature to benefit from then it will present the investigation results for a hybrid approach used where different algorithms using laser, sonar, and camera sensors were tested and compared. The contribution of this thesis is the development of a hybrid approach for SLAM that uses different sensors and where different factors are taken into consideration such as dynamic objects, and the development of a scalable grid map model with new sensors models for real time update of the map.The thesis will show the success found, difficulties faced and limitations of the algorithms developed which were simulated and experimentally tested in an indoors environment

Comparative analysis of different approaches to target classification and localization with sonar

The comparison of different classification and fusion techniques was done for target classification and localization with sonar. Target localization performance of artificial neural networks (ANN) was found to be better than the target differentiation algorithm (TDA) and fusion techniques. The target classification performance of non-parametric approaches was better than that of parameterized density estimator (PDE) using homoscedastic and heteroscedastic NM for statistical pattern recognition techniques