To develop an efficient variable speed compressor motor system

This research presents a proposed new method of improving the energy efficiency of a Variable Speed Drive (VSD) for induction motors. The principles of VSD are reviewed with emphasis on the efficiency and power losses associated with the operation of the variable speed compressor motor drive, particularly at low speed operation.The efficiency of induction motor when operated at rated speed and load torque is high. However at low load operation, application of the induction motor at rated flux will cause the iron losses to increase excessively, hence its efficiency will reduce dramatically. To improve this efficiency, it is essential to obtain the flux level that minimizes the total motor losses. This technique is known as an efficiency or energy optimization control method. In practice, typical of the compressor load does not require high dynamic response, therefore improvement of the efficiency optimization control that is proposed in this research is based on scalar control model.In this research, development of a new neural network controller for efficiency optimization control is proposed. The controller is designed to generate both voltage and frequency reference signals imultaneously. To achieve a robust controller from variation of motor parameters, a real-time or on-line learning algorithm based on a second order optimization Levenberg-Marquardt is employed. The simulation of the proposed controller for variable speed compressor is presented. The results obtained clearly show that the efficiency at low speed is significant increased. Besides that the speed of the motor can be maintained. Furthermore, the controller is also robust to the motor parameters variation. The simulation results are also verified by experiment

Observation of charge ordering signal in monovalent doped Nd0.75Na0.25-xKxMn1O3 (0 ≤ x ≤ 0.10) manganites

K doping in the compound of Nd0.75Na0.25-xKxMn1O3 (x = 0, 0.05 and 0.10) manganites have been investigated to study its effect on crystalline phase and surface morphology as well as electrical transport and magnetic properties. The structure properties of the Nd0.75Na0.25- xKxMnO3 manganite have been characterized using X-ray diffraction measurement and it proved that the crystalline phase of samples were essentially single phased and indexed as orthorhombic structure with space group of Pnma. The morphological study from scanning electron microscope showed there was an improvement on the grains boundaries and sizes as well as the compactness with K doping suggestively due to the difference of ionic radius. On the other hand, DC electrical resistivity measurement showed all samples exhibit insulating behavior. However, analysis of dlnρ/dT-1 vs. T revealed the clearly peaks could be observed at temperature 210K for x = 0 and the peaks were shifted to the lower temperature around 190 K and 165 K for x = 0.05 and x = 0.1 respectively, indicate the existence of charge ordering (CO) state in the compound. Meanwhile, the investigation on magnetic behavior showed all samples exhibit transition from paramagnetic phase to anti-ferromagnetic phase with decreasing temperature and the TN was observed to shift to lower temperature suggestively due to weakening of CO stat

Five-Axis Machine Tool Condition Monitoring Using dSPACE Real-Time System

This paper presents the design, development and SIMULINK implementation of the lumped parameter model of C-axis drive from GEISS five-axis CNC machine tool. The simulated results compare well with the experimental data measured from the actual machine. Also the paper describes the steps for data acquisition using ControlDesk and hardware-in-the-loop implementation of the drive models in dSPACE real-time system. The main components of the HIL system are: the drive model simulation and input – output (I/O) modules for receiving the real controller outputs. The paper explains how the experimental data obtained from the data acquisition process using dSPACE real-time system can be used for the development of machine tool diagnosis and prognosis systems that facilitate the improvement of maintenance activities

Energy-efficient control of pump units based on neural-network parameter observer

An observer based on an artificial neural network was designed. The observer determines the pumping unit performance depending on the operating point. Determination is based on the measured technological coordinates of the system and the pressure of the turbomechanism. Three neural networks were designed for three types of the productivity observer. The developed observer was investigated by the simulation method within different variations of disturbing actions, such as hydraulic resistance of the hydraulic system and geodetic pressure. A comparative analysis of three types of the productivity observer, built with using the pressure and different signals of the system with arbitrary change of hydraulic resistance was given. By the use of the pump unit efficiency observer, in addition to the results presented earlier, the efficiency of the productivity observer, which built with using different sensors, in water supply systems with two series-connected pump units, operating for filling the large tank, is researched. In the water supply system one pump speed is regulated, the other is unregulated. References 14, figures 5

Data-driven online temperature compensation for robust field-oriented torque-controlled induction machines

Squirrel-cage induction machines (IMs) with indirect field-oriented control are widely used in industry and are frequently chosen for their accurate and dynamic torque control. During operation, however, temperature rises leading to changes in machine parameters. The rotor resistance, in particular, alters, affecting the accuracy of the torque control. The authors investigated the effect of a rotor resistance parameter mismatch in the control algorithm on the angular rotor flux misalignment and the subsequent deviation of stator currents and motor torque from their setpoints. Hence, an online, data-driven torque compensation to eliminate the temperature effect is proposed to enable robust torque-controlled IMs. A model-based analysis and experimental mapping of the temperature effect on motor torque is presented. A temperature-torque lookup-table is subsequently implemented within the control algorithm demonstrating the ability to reduce the detrimental effect of temperature on torque control. Experimental results on a 5.5 kW squirrel-cage induction motor show that the proposed data-driven online temperature compensation method is able to reduce torque mismatch when compared to having no temperature compensation. Up to 17% torque mismatch is reduced at nominal torque and even up to 23% at torque setpoints that are lower than 20% of the nominal torque. A limited torque error of <1% remains in a broad operating range

Advances in power quality analysis techniques for electrical machines and drives: a review

The electric machines are the elements most used at an industry level, and they represent the major power consumption of the productive processes. Particularly speaking, among all electric machines, the motors and their drives play a key role since they literally allow the motion interchange in the industrial processes; it could be said that they are the medullar column for moving the rest of the mechanical parts. Hence, their proper operation must be guaranteed in order to raise, as much as possible, their efficiency, and, as consequence, bring out the economic benefits. This review presents a general overview of the reported works that address the efficiency topic in motors and drives and in the power quality of the electric grid. This study speaks about the relationship existing between the motors and drives that induces electric disturbances into the grid, affecting its power quality, and also how these power disturbances present in the electrical network adversely affect, in turn, the motors and drives. In addition, the reported techniques that tackle the detection, classification, and mitigations of power quality disturbances are discussed. Additionally, several works are reviewed in order to present the panorama that show the evolution and advances in the techniques and tendencies in both senses: motors and drives affecting the power source quality and the power quality disturbances affecting the efficiency of motors and drives. A discussion of trends in techniques and future work about power quality analysis from the motors and drives efficiency viewpoint is provided. Finally, some prompts are made about alternative methods that could help in overcome the gaps until now detected in the reported approaches referring to the detection, classification and mitigation of power disturbances with views toward the improvement of the efficiency of motors and drives.Peer ReviewedPostprint (published version

Analysis, Modeling and Neural Network Traction Control of an Electric Vehicle without Differential Gears

International audienceThis paper presents system analysis, modeling and simulation of an EV with two independent rear wheel drives. The traction control system is designed to guarantee the EV dynamics and stability in case of no differential gears. Using two electrics in-wheel motors give the possibility to have a torque and speed control in each wheel. This control level improves the EV stability and the safety. The proposed traction control system uses the vehicle speed, which is different from wheels speed characterized by slip in the driving mode, an input. In this case, a generalized neural network algorithm is proposed to estimate the vehicle speed. In terms of the analysis and the simulations carried out, the conclusion can be drawn that the proposed system is feasible. Simulation results on a test vehicle propelled by two 37-kW induction motors showed that the proposed control approach operates satisfactorily

Linear motor motion control using a learning feedforward controller

The design and realization of an online learning motion controller for a linear motor is presented, and its usefulness is evaluated. The controller consists of two components: (1) a model-based feedback component, and (2) a learning feedforward component. The feedback component is designed on the basis of a simple second-order linear model, which is known to have structural errors. In the design, an emphasis is placed on robustness. The learning feedforward component is a neural-network-based controller, comprised of a one-hidden-layer structure with second-order B-spline basis functions. Simulations and experimental evaluations show that, with little effort, a high-performance motion system can be obtained with this approach