Wireless model-based predictive networked control system over cooperative wireless network

Owing to their distributed architecture, networked control systems (NCSs) are proven to be feasible in scenarios where a spatially distributed feedback control system is required. Traditionally, such NCSs operate over real-time wired networks. Recently, in order to achieve the utmost flexibility, scalability, ease of deployment, and maintainability, wireless networks such as IEEE 802.11 wireless local area networks (LANs) are being preferred over dedicated wired networks. However, conventional NCSs with event-triggered controllers and actuators cannot operate over such general purpose wireless networks since the stability of the system is compromised due to unbounded delays and unpredictable packet losses that are typical in the wireless medium. Approaching the wireless networked control problem from two perspectives, this work introduces a practical wireless NCS and an implementation of a cooperative medium access control protocol that work jointly to achieve decent control under severe impairments, such as unbounded delay, bursts of packet loss and ambient wireless traffic. The proposed system is evaluated on a dedicated test platform under numerous scenarios and significant performance gains are observed, making cooperative communications a strong candidate for improving the reliability of industrial wireless networks

H∞ controller design for networked predictive control systems based on the average dwell-time approach

This brief focuses on the problem of H∞ control for a class of networked control systems with time-varying delay in both forward and backward channels. Based on the average dwell-time method, a novel delay-compensation strategy is proposed by appropriately assigning the subsystem or designing the switching signals. Combined with this strategy, an improved predictive controller design approach in which the controller gain varies with the delay is presented to guarantee that the closed-loop system is exponentially stable with an H∞-norm bound for a class of switching signal in terms of nonlinear matrix inequalities. Furthermore, an iterative algorithm is presented to solve these nonlinear matrix inequalities to obtain a suboptimal minimum disturbance attenuation level. A numerical example illustrates the effectiveness of the proposed method

Performance analysis with network-enhanced complexities: On fading measurements, event-triggered mechanisms, and cyber attacks

Copyright © 2014 Derui Ding et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.Nowadays, the real-world systems are usually subject to various complexities such as parameter uncertainties, time-delays, and nonlinear disturbances. For networked systems, especially large-scale systems such as multiagent systems and systems over sensor networks, the complexities are inevitably enhanced in terms of their degrees or intensities because of the usage of the communication networks. Therefore, it would be interesting to (1) examine how this kind of network-enhanced complexities affects the control or filtering performance; and (2) develop some suitable approaches for controller/filter design problems. In this paper, we aim to survey some recent advances on the performance analysis and synthesis with three sorts of fashionable network-enhanced complexities, namely, fading measurements, event-triggered mechanisms, and attack behaviors of adversaries. First, these three kinds of complexities are introduced in detail according to their engineering backgrounds, dynamical characteristic, and modelling techniques. Then, the developments of the performance analysis and synthesis issues for various networked systems are systematically reviewed. Furthermore, some challenges are illustrated by using a thorough literature review and some possible future research directions are highlighted.This work was supported in part by the National Natural Science Foundation of China under Grants 61134009, 61329301, 61203139, 61374127, and 61374010, the Royal Society of the UK, and the Alexander von Humboldt Foundation of Germany

Robust fault detection for networked systems with distributed sensors

Copyright [2011] IEEE. This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Brunel University's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to [email protected]. By choosing to view this document, you agree to all provisions of the copyright laws protecting it.This paper is concerned with the robust fault detection problem for a class of discrete-time networked systems with distributed sensors. Since the bandwidth of the communication channel is limited, packets from different sensors may be dropped with different missing rates during the transmission. Therefore, a diagonal matrix is introduced to describe the multiple packet dropout phenomenon and the parameter uncertainties are supposed to reside in a polytope. The aim is to design a robust fault detection filter such that, for all probabilistic packet dropouts, all unknown inputs and admissible uncertain parameters, the error between the residual (generated by the fault detection filter) and the fault signal is made as small as possible. Two parameter-dependent approaches are proposed to obtain less conservative results. The existence of the desired fault detection filter can be determined from the feasibility of a set of linear matrix inequalities that can be easily solved by the efficient convex optimization method. A simulation example on a networked three-tank system is provided to illustrate the effectiveness and applicability of the proposed techniques.This work was supported by national 973 project under Grants 2009CB320602 and 2010CB731800, and the NSFC under Grants 60721003 and 60736026

Robust Controller for Delays and Packet Dropout Avoidance in Solar-Power Wireless Network

Solar Wireless Networked Control Systems (SWNCS) are a style of distributed control systems where sensors, actuators, and controllers are interconnected via a wireless communication network. This system setup has the benefit of low cost, flexibility, low weight, no wiring and simplicity of system diagnoses and maintenance. However, it also unavoidably calls some wireless network time delays and packet dropout into the design procedure. Solar lighting system offers a clean environment, therefore able to continue for a long period. SWNCS also offers multi Service infrastructure solution for both developed and undeveloped countries. The system provides wireless controller lighting, wireless communications network (WI-FI/WIMAX), CCTV surveillance, and wireless sensor for weather measurement which are all powered by solar energy