17,053 research outputs found
RTXP : A Localized Real-Time Mac-Routing Protocol for Wireless Sensor Networks
Protocols developed during the last years for Wireless Sensor Networks (WSNs)
are mainly focused on energy efficiency and autonomous mechanisms (e.g.
self-organization, self-configuration, etc). Nevertheless, with new WSN
applications, appear new QoS requirements such as time constraints. Real-time
applications require the packets to be delivered before a known time bound
which depends on the application requirements. We particularly focus on
applications which consist in alarms sent to the sink node. We propose
Real-Time X-layer Protocol (RTXP), a real-time communication protocol. To the
best of our knowledge, RTXP is the first MAC and routing real-time
communication protocol that is not centralized, but instead relies only on
local information. The solution is cross-layer (X-layer) because it allows to
control the delays due to MAC and Routing layers interactions. RTXP uses a
suited hop-count-based Virtual Coordinate System which allows deterministic
medium access and forwarder selection. In this paper we describe the protocol
mechanisms. We give theoretical bound on the end-to-end delay and the capacity
of the protocol. Intensive simulation results confirm the theoretical
predictions and allow to compare with a real-time centralized solution. RTXP is
also simulated under harsh radio channel, in this case the radio link
introduces probabilistic behavior. Nevertheless, we show that RTXP it performs
better than a non-deterministic solution. It thus advocates for the usefulness
of designing real-time (deterministic) protocols even for highly unreliable
networks such as WSNs
Doped Fountain Coding for Minimum Delay Data Collection in Circular Networks
This paper studies decentralized, Fountain and network-coding based
strategies for facilitating data collection in circular wireless sensor
networks, which rely on the stochastic diversity of data storage. The goal is
to allow for a reduced delay collection by a data collector who accesses the
network at a random position and random time. Data dissemination is performed
by a set of relays which form a circular route to exchange source packets. The
storage nodes within the transmission range of the route's relays linearly
combine and store overheard relay transmissions using random decentralized
strategies. An intelligent data collector first collects a minimum set of coded
packets from a subset of storage nodes in its proximity, which might be
sufficient for recovering the original packets and, by using a message-passing
decoder, attempts recovering all original source packets from this set.
Whenever the decoder stalls, the source packet which restarts decoding is
polled/doped from its original source node. The random-walk-based analysis of
the decoding/doping process furnishes the collection delay analysis with a
prediction on the number of required doped packets. The number of doped packets
can be surprisingly small when employed with an Ideal Soliton code degree
distribution and, hence, the doping strategy may have the least collection
delay when the density of source nodes is sufficiently large. Furthermore, we
demonstrate that network coding makes dissemination more efficient at the
expense of a larger collection delay. Not surprisingly, a circular network
allows for a significantly more (analytically and otherwise) tractable
strategies relative to a network whose model is a random geometric graph
Cellular Underwater Wireless Optical CDMA Network: Potentials and Challenges
Underwater wireless optical communications is an emerging solution to the
expanding demand for broadband links in oceans and seas. In this paper, a
cellular underwater wireless optical code division multiple-access (UW-OCDMA)
network is proposed to provide broadband links for commercial and military
applications. The optical orthogonal codes (OOC) are employed as signature
codes of underwater mobile users. Fundamental key aspects of the network such
as its backhaul architecture, its potential applications and its design
challenges are presented. In particular, the proposed network is used as
infrastructure of centralized, decentralized and relay-assisted underwater
sensor networks for high-speed real-time monitoring. Furthermore, a promising
underwater localization and positioning scheme based on this cellular network
is presented. Finally, probable design challenges such as cell edge coverage,
blockage avoidance, power control and increasing the network capacity are
addressed.Comment: 11 pages, 10 figure
mTOSSIM: A simulator that estimates battery lifetime in wireless sensor networks
Knowledge of the battery lifetime of the wireless sensor network is important for many situations,
such as in evaluation of the location of nodes or the estimation of the connectivity,
along time, between devices. However, experimental evaluation is a very time-consuming
task. It depends on many factors, such as the use of the radio transceiver or the distance
between nodes. Simulations reduce considerably this time. They allow the evaluation of
the network behavior before its deployment. This article presents a simulation tool which
helps developers to obtain information about battery state. This simulator extends the
well-known TOSSIM simulator. Therefore it is possible to evaluate TinyOS applications
using an accurate model of the battery consumption and its relation to the radio power
transmission. Although an specific indoor scenario is used in testing of simulation, the simulator
is not limited to this environment. It is possible to work in outdoor scenarios too.
Experimental results validate the proposed model.Junta de AndalucÃa P07-TIC-02476Junta de AndalucÃa TIC-570
Cooperative network-coding system for wireless sensor networks
Describes a cooperative network coding system for wireless sensor networks. In this paper, we propose two practical power) and bandwidth)efficient systems based on amplify)and)forward (AF) and decode)and)forward (DF) schemes to address the problem of information exchange via a relay. The key idea is to channel encode each source’s message by using a high)performance non)binary turbo code based on Partial Unit Memory (PUM) codes to enhance the bit)error)rate performance, then reduce the energy consumption and increase spectrum efficiency by using network coding (NC) to combine individual nodes’ messages at the relay before forwarding to the destination. Two simple and low complexity physical layer NC schemes are proposed based on combinations of received source messages at the relay. We also present the theoretical limits and numerical analysis of the proposed schemes. Simulation results under Additive White Gaussian Noise, confirm that the proposed schemes achieve significant bandwidth savings and fewer transmissions over the benchmark systems which do not resort to NC. Theoretical limits for capacity and Signal to Noise Ratio behaviour for the proposed schemes are derived. The paper also proposes a cooperative strategy that is useful when insufficient combined messages are received at a node to recover the desired source messages, thus enabling the system to retrieve all packets with significantly fewer retransmission request messages
GCP: Gossip-based Code Propagation for Large-scale Mobile Wireless Sensor Networks
Wireless sensor networks (WSN) have recently received an increasing interest.
They are now expected to be deployed for long periods of time, thus requiring
software updates. Updating the software code automatically on a huge number of
sensors is a tremendous task, as ''by hand'' updates can obviously not be
considered, especially when all participating sensors are embedded on mobile
entities. In this paper, we investigate an approach to automatically update
software in mobile sensor-based application when no localization mechanism is
available. We leverage the peer-to-peer cooperation paradigm to achieve a good
trade-off between reliability and scalability of code propagation. More
specifically, we present the design and evaluation of GCP ({\emph Gossip-based
Code Propagation}), a distributed software update algorithm for mobile wireless
sensor networks. GCP relies on two different mechanisms (piggy-backing and
forwarding control) to improve significantly the load balance without
sacrificing on the propagation speed. We compare GCP against traditional
dissemination approaches. Simulation results based on both synthetic and
realistic workloads show that GCP achieves a good convergence speed while
balancing the load evenly between sensors
Improvement of strength and water absorption of Interlocking Compressed Earth Bricks (ICEB) with addition of Ureolytic Bacteria (UB)
Interlocking Compressed Earth Brick (ICEB) are cement stabilized soil bricks that allow for dry stacked construction. This characteristic resulted to faster the process of building walls and requires less skilled labour as the bricks are laid dry and lock into place. However there is plenty room for improving the interlocking bricks by increase its durability. Many studies have been conducted in order to improve the durability of bricks by using environmentally method. One of the methods is by introducing bacteria into bricks. Bacteria in brick induced calcite precipitation (calcite crystals) to cover the voids continuously. Ureolytic Bacteria (UB) was used in this study as a partial replacement of limestone water with percentage of 1%, 3% and 5%. Enrichment process was done in soil condition to ensure the survivability of UB in ICEB environment. This paper evaluates the effect of UB in improving the strength and water absorption properties of ICEB and microstructure analysis. The results show that addition of 5% UB in ICEB indicated positive results in improving the ICEB properties by 15.25% in strength, 14.72% in initial water absorption and 14.68% reduction in water absorption. Precipitation of calcium carbonate (CaCo3) in form of calcite can be distinguish clearly in microstructure analysis
- …