Efficient memory management in video on demand servers

In this article we present, analyse and evaluate a new memory management technique for video-on-demand servers. Our proposal, Memory Reservation Per Storage Device (MRPSD), relies on the allocation of a fixed, small number of memory buffers per storage device. Selecting adequate scheduling algorithms, information storage strategies and admission control mechanisms, we demonstrate that MRPSD is suited for the deterministic service of variable bit rate streams to intolerant clients. MRPSD allows large memory savings compared to traditional memory management techniques, based on the allocation of a certain amount of memory per client served, without a significant performance penaltyPublicad

Efficient memory management in VOD disk array servers usingPer-Storage-Device buffering

We present a buffering technique that reduces video-on-demand server memory requirements in more than one order of magnitude. This technique, Per-Storage-Device Buffering (PSDB), is based on the allocation of a fixed number of buffers per storage device, as opposed to existing solutions based on per-stream buffering allocation. The combination of this technique with disk array servers is studied in detail, as well as the influence of Variable Bit Streams. We also present an interleaved data placement strategy, Constant Time Length Declustering, that results in optimal performance in the service of VBR streams. PSDB is evaluated by extensive simulation of a disk array server model that incorporates a simulation based admission test.This research was supported in part by the National R&D Program of Spain, Project Number TIC97-0438.Publicad

The design and implementation of a multimedia storage server tosupport video-on-demand applications

In this paper we present the design and implementation of a client/server based multimedia architecture for supporting video-on-demand applications. We describe in detail the software architecture of the implementation along with the adopted buffering mechanism. The proposed multithreaded architecture obtains, on one hand, a high degree of parallelism at the server side, allowing both the disk controller and the network card controller work in parallel. On the other hand; at the client side, it achieves the synchronized playback of the video stream at its precise rate, decoupling this process from the reception of data through the network. Additionally, we have derived, under an engineering perspective, some services that a real-time operating system should offer to satisfy the requirements found in video-on-demand applications.This research has been supported by the Regional Research Plan of the Autonomus Community of Madrid under an F.P.I. research grant.Publicad

Analysis and implementation of the Large Scale Video-on-Demand System

Next Generation Network (NGN) provides multimedia services over broadband based networks, which supports high definition TV (HDTV), and DVD quality video-on-demand content. The video services are thus seen as merging mainly three areas such as computing, communication, and broadcasting. It has numerous advantages and more exploration for the large-scale deployment of video-on-demand system is still needed. This is due to its economic and design constraints. It's need significant initial investments for full service provision. This paper presents different estimation for the different topologies and it require efficient planning for a VOD system network. The methodology investigates the network bandwidth requirements of a VOD system based on centralized servers, and distributed local proxies. Network traffic models are developed to evaluate the VOD system's operational bandwidth requirements for these two network architectures. This paper present an efficient estimation of the of the bandwidth requirement for the different architectures.Comment: 9 pages, 8 figure

Building Internet caching systems for streaming media delivery

The proxy has been widely and successfully used to cache the static Web objects fetched by a client so that the subsequent clients requesting the same Web objects can be served directly from the proxy instead of other sources faraway, thus reducing the server\u27s load, the network traffic and the client response time. However, with the dramatic increase of streaming media objects emerging on the Internet, the existing proxy cannot efficiently deliver them due to their large sizes and client real time requirements.;In this dissertation, we design, implement, and evaluate cost-effective and high performance proxy-based Internet caching systems for streaming media delivery. Addressing the conflicting performance objectives for streaming media delivery, we first propose an efficient segment-based streaming media proxy system model. This model has guided us to design a practical streaming proxy, called Hyper-Proxy, aiming at delivering the streaming media data to clients with minimum playback jitter and a small startup latency, while achieving high caching performance. Second, we have implemented Hyper-Proxy by leveraging the existing Internet infrastructure. Hyper-Proxy enables the streaming service on the common Web servers. The evaluation of Hyper-Proxy on the global Internet environment and the local network environment shows it can provide satisfying streaming performance to clients while maintaining a good cache performance. Finally, to further improve the streaming delivery efficiency, we propose a group of the Shared Running Buffers (SRB) based proxy caching techniques to effectively utilize proxy\u27s memory. SRB algorithms can significantly reduce the media server/proxy\u27s load and network traffic and relieve the bottlenecks of the disk bandwidth and the network bandwidth.;The contributions of this dissertation are threefold: (1) we have studied several critical performance trade-offs and provided insights into Internet media content caching and delivery. Our understanding further leads us to establish an effective streaming system optimization model; (2) we have designed and evaluated several efficient algorithms to support Internet streaming content delivery, including segment caching, segment prefetching, and memory locality exploitation for streaming; (3) having addressed several system challenges, we have successfully implemented a real streaming proxy system and deployed it in a large industrial enterprise

ATOM : a distributed system for video retrieval via ATM networks

The convergence of high speed networks, powerful personal computer processors and improved storage technology has led to the development of video-on-demand services to the desktop that provide interactive controls and deliver Client-selected video information on a Client-specified schedule. This dissertation presents the design of a video-on-demand system for Asynchronous Transfer Mode (ATM) networks, incorporating an optimised topology for the nodes in the system and an architecture for Quality of Service (QoS). The system is called ATOM which stands for Asynchronous Transfer Mode Objects. Real-time video playback over a network consumes large bandwidth and requires strict bounds on delay and error in order to satisfy the visual and auditory needs of the user. Streamed video is a fundamentally different type of traffic to conventional IP (Internet Protocol) data since files are viewed in real-time, not downloaded and then viewed. This streaming data must arrive at the Client decoder when needed or it loses its interactive value. Characteristics of multimedia data are investigated including the use of compression to reduce the excessive bit rates and storage requirements of digital video. The suitability of MPEG-1 for video-on-demand is presented. Having considered the bandwidth, delay and error requirements of real-time video, the next step in designing the system is to evaluate current models of video-on-demand. The distributed nature of four such models is considered, focusing on how Clients discover Servers and locate videos. This evaluation eliminates a centralized approach in which Servers have no logical or physical connection to any other Servers in the network and also introduces the concept of a selection strategy to find alternative Servers when Servers are fully loaded. During this investigation, it becomes clear that another entity (called a Broker) could provide a central repository for Server information. Clients have logical access to all videos on every Server simply by connecting to a Broker. The ATOM Model for distributed video-on-demand is then presented by way of a diagram of the topology showing the interconnection of Servers, Brokers and Clients; a description of each node in the system; a list of the connectivity rules; a description of the protocol; a description of the Server selection strategy and the protocol if a Broker fails. A sample network is provided with an example of video selection and design issues are raised and solved including how nodes discover each other, a justification for using a mesh topology for the Broker connections, how Connection Admission Control (CAC) is achieved, how customer billing is achieved and how information security is maintained. A calculation of the number of Servers and Brokers required to service a particular number of Clients is presented. The advantages of ATOM are described. The underlying distributed connectivity is abstracted away from the Client. Redundant Server/Broker connections are eliminated and the total number of connections in the system are minimized by the rule stating that Clients and Servers may only connect to one Broker at a time. This reduces the total number of Switched Virtual Circuits (SVCs) which are a performance hindrance in ATM. ATOM can be easily scaled by adding more Servers which increases the total system capacity in terms of storage and bandwidth. In order to transport video satisfactorily, a guaranteed end-to-end Quality of Service architecture must be in place. The design methodology for such an architecture is investigated starting with a review of current QoS architectures in the literature which highlights important definitions including a flow, a service contract and flow management. A flow is a single media source which traverses resource modules between Server and Client. The concept of a flow is important because it enables the identification of the areas requiring consideration when designing a QoS architecture. It is shown that ATOM adheres to the principles motivating the design of a QoS architecture, namely the Integration, Separation and Transparency principles. The issue of mapping human requirements to network QoS parameters is investigated and the action of a QoS framework is introduced, including several possible causes of QoS degradation. The design of the ATOM Quality of Service Architecture (AQOSA) is then presented. AQOSA consists of 11 modules which interact to provide end-to-end QoS guarantees for each stream. Several important results arise from the design. It is shown that intelligent choice of stored videos in respect of peak bandwidth can improve overall system capacity. The concept of disk striping over a disk array is introduced and a Data Placement Strategy is designed which eliminates disk hot spots (i.e. Overuse of some disks whilst others lie idle.) A novel parameter (the B-P Ratio) is presented which can be used by the Server to predict future bursts from each video stream. The use of Traffic Shaping to decrease the load on the network from each stream is presented. Having investigated four algorithms for rewind and fast-forward in the literature, a rewind and fast-forward algorithm is presented. The method produces a significant decrease in bandwidth, and the resultant stream is very constant, reducing the chance that the stream will add to network congestion. The C++ classes of the Server, Broker and Client are described emphasizing the interaction between classes. The use of ATOM in the Virtual Private Network and the multimedia teaching laboratory is considered. Conclusions and recommendations for future work are presented. It is concluded that digital video applications require high bandwidth, low error, low delay networks; a video-on-demand system to support large Client volumes must be distributed, not centralized; control and operation (transport) must be separated; the number of ATM Switched Virtual Circuits (SVCs) must be minimized; the increased connections caused by the Broker mesh is justified by the distributed information gain; a Quality of Service solution must address end-to-end issues. It is recommended that a web front-end for Brokers be developed; the system be tested in a wide area A TM network; the Broker protocol be tested by forcing failure of a Broker and that a proprietary file format for disk striping be implemented