Design and Implementation of Indoor Disinfection Robot System

After the outbreak of COVID-19 virus, disinfection has become one of the important means of epidemic prevention. Traditional manual disinfection can easily cause cross infection problems. Using robots to complete disinfection work can reduce people's social contact and block the spread of viruses. This thesis implements an engineering prototype of a indoor disinfection robot from the perspective of product development, with the amin of using robots to replace manual disinfection operations. The thesis uses disinfection module, control module and navigation module to compose the hardware of the robot. The disinfection module uses ultrasonic atomizers, UV-C ultraviolet disinfection lamps, and air purifiers to disinfect and disinfect the ground and air respectively. The control module is responsible for the movement and obstacle avoidance of the robot. The navigation module uses Raspberry Pi and LiDAR to achieve real-time robot positioning and two-dimensional plane mapping. In terms of robot software,we have done the following work: (1) Based on the ROS framework, we have implemented functions such as SLAM mapping, location positioning, and odometer data calibration.(2) Customize communication protocols to manage peripheral devices such as UV-C lights, ultrasonic atomizers, air purifiers, and motors on the control board. (3) Develop an Android mobile app that utilizes ROSBridge's lightweight communication architecture to achieve cross platform data exchange between mobile devices and navigation boards, as well as network connectivity and interaction between mobile phones and robots Finally, this thesis implements an engineering prototype of a household disinfection robot from the perspective of product development

A genetic algorithm for mobile robot localization using ultrasonic sensors

A mobile robot requires the perception of its local environment for position estimation. Ultrasonic range data provide a robust description of the local environment for navigation. This article presents an ultrasonic sensor localization system for autonomous mobile robot navigation in an indoor semi-structured environment. The proposed algorithm is based upon an iterative non-linear filter, which utilizes matches between observed geometric beacons and an a-priori map of beacon locations, to correct the position and orientation of the vehicle. A non-linear filter based on a genetic algorithm as an emerging optimization method to search for optimal positions is described. The resulting self-localization module has been integrated successfully in a more complex navigation system. Experiments demonstrate the effectiveness of the proposed method in real world applications.Publicad

PERANCANGAN SISTEM KOMUNIKASI PADA MOBILE ROBOT PENDETEKSI GAS KARBON MONOKSIDA DENGAN MODUL XBEE

Mobile robot with gas leak detection using XBee Module is By using the XBee module is useful to establish communication between the maker of the robotic control to be communicated by wireless. Mobile robot using a gas leak detector sensor gas detector mq 7 as, Arduino as a robot controller, SRF05 sensor navigation system as well as the XBee module as a warning communication for data transmission and gas leaks are detected gas concentration values. Mobile robots will look for the source of a gas leak with the help of sensor tgs MQ 7 contained in the robot itself, the robot will stop when it has detected a gas leak sources and transmit data in the form gas levels via the XBee module. The performance of the mobile robot to detectgas leakage is detected on a computer display with software applications using communication media Coolterm XBee module. (Keywords: Mobile Robot, Gas Sensor, XBee Module, Software

Mapless LiDAR Navigation Control of Wheeled Mobile Robots Based on Deep Imitation Learning

[[abstract]]This paper addresses the problems related to the mapless navigation control of wheeled mobile robots based on deep learning technology. The traditional navigation control framework is based on a global map of the environment, and its navigation performance depends on the quality of the global map. In this paper, we proposes a mapless Light Detection and Ranging (LiDAR) navigation control method for wheeled mobile robots based on deep imitation learning. The proposed method is a data-driven control method that directly uses LiDAR sensors and relative target position for mobile robot navigation control. A deep convolutional neural network (CNN) model is proposed to predict motion control commands of the mobile robot without the requirement of the global map to achieve navigation control of the mobile robot in unknown environments. While collecting the training dataset, we manipulated the mobile robot to avoid obstacles through manual control and recorded the raw data of the LiDAR sensor, the relative target position, and the corresponding motion control commands. Next, we applied a data augmentation method on the recorded samples to increase the number of training samples in the dataset. In the network model design, the proposed CNN model consists of a LiDAR CNN module to extract LiDAR features and a motion prediction module to predict the motion behavior of the robot. In the model training phase, the proposed CNN model learns the mapping between the input sensor data and the desired motion behavior through end-to-end imitation learning. Experimental results show that the proposed mapless LiDAR navigation control method can safely navigate the mobile robot in four unseen environments with an average success rate of 75%. Therefore, the proposed mapless LiDAR navigation control system is effective for robot navigation control in an unknown environment without the global map.[[notice]]補正完

Tahap penguasaan, sikap dan minat pelajar Kolej Kemahiran Tinggi MARA terhadap mata pelajaran Bahasa Inggeris

Kajian ini dilakukan untuk mengenal pasti tahap penguasaan, sikap dan minat pelajar Kolej Kemahiran Tinggi Mara Sri Gading terhadap Bahasa Inggeris. Kajian yang dijalankan ini berbentuk deskriptif atau lebih dikenali sebagai kaedah tinjauan. Seramai 325 orang pelajar Diploma in Construction Technology dari Kolej Kemahiran Tinggi Mara di daerah Batu Pahat telah dipilih sebagai sampel dalam kajian ini. Data yang diperoleh melalui instrument soal selidik telah dianalisis untuk mendapatkan pengukuran min, sisihan piawai, dan Pekali Korelasi Pearson untuk melihat hubungan hasil dapatan data. Manakala, frekuensi dan peratusan digunakan bagi mengukur penguasaan pelajar. Hasil dapatan kajian menunjukkan bahawa tahap penguasaan Bahasa Inggeris pelajar adalah berada pada tahap sederhana manakala faktor utama yang mempengaruhi penguasaan Bahasa Inggeris tersebut adalah minat diikuti oleh sikap. Hasil dapatan menggunakan pekali Korelasi Pearson juga menunjukkan bahawa terdapat hubungan yang signifikan antara sikap dengan penguasaan Bahasa Inggeris dan antara minat dengan penguasaan Bahasa Inggeris. Kajian menunjukkan bahawa semakin positif sikap dan minat pelajar terhadap pengajaran dan pembelajaran Bahasa Inggeris semakin tinggi pencapaian mereka. Hasil daripada kajian ini diharapkan dapat membantu pelajar dalam meningkatkan penguasaan Bahasa Inggeris dengan memupuk sikap positif dalam diri serta meningkatkan minat mereka terhadap Bahasa Inggeris dengan lebih baik. Oleh itu, diharap kajian ini dapat memberi panduan kepada pihak-pihak yang terlibat dalam membuat kajian yang akan datang

Neural Network Local Navigation of Mobile Robots in a Moving Obstacles Environment

IF AC Intelligent Components and Instruments for Control Applications, Budapest, Hungary, 1994This paper presents a local navigation method based on generalized predictive control. A modified cost function to avoid moving and static obstacles is presented. An Extended Kaiman Filter is proposed to predict the motions of the obstacles. A Neural Network implementation of this method is analysed. Simulation results are shown.Ministerio de Ciencia y Tecnología TAP93-0408Ministerio de Ciencia y Tecnología TAP93-058

FPGA-based module for SURF extraction

We present a complete hardware and software solution of an FPGA-based computer vision embedded module capable of carrying out SURF image features extraction algorithm. Aside from image analysis, the module embeds a Linux distribution that allows to run programs specifically tailored for particular applications. The module is based on a Virtex-5 FXT FPGA which features powerful configurable logic and an embedded PowerPC processor. We describe the module hardware as well as the custom FPGA image processing cores that implement the algorithm's most computationally expensive process, the interest point detection. The module's overall performance is evaluated and compared to CPU and GPU based solutions. Results show that the embedded module achieves comparable disctinctiveness to the SURF software implementation running in a standard CPU while being faster and consuming significantly less power and space. Thus, it allows to use the SURF algorithm in applications with power and spatial constraints, such as autonomous navigation of small mobile robots