increasing efficiency of resource allocation for d2d communication in nb iot context

Abstract Internet of things (IoT) and device to device (D2D) communications are among the novel promising technologies in the current releases of 4G and they will play a fundamental role in the next generation 5G as well. In this paper, it is investigated the impact of allocation strategies that take into account the mutual interference in D2D Narrow-Band IoT terminals and cellular terminals transmitting in the same resource block. In a multi-cellular downlink context, the proposed approach and the analysis can serve also as an efficient criterion for selecting the target SINR, useful for managing the power control in the uplink. The rate improvement, measured with the proposed approach, is between 10% and 15% w.r.t. conventional techniques

Reliability optimization in narrowband device-to-device communication for 5G and beyond-5G networks

The 5G and beyond-5G (B5G) is expected to be a key enabler for Internet-of-Everything (IoE). The narrowband Internet of Things (NB-IoT) is a low-power wide-area enabling technology introduced by the 3rd Generation Partnership in 5G. The objective of the NB-IoT is to enhance the mobile coverage area by increasing the number of repetitions of control and data packets between user equipment (UE) and the base station/evolved NodeB (BS/eNB). While these repetitions improve data delivery for delay-sensitive applications, they degrade the efficiency of the already resource-constrained IoT system by increasing the system overhead and energy consumption. Moreover, NB-IoT devices in the edge region of the cellular coverage area require more repetitions, which augment energy consumption. In this study, we investigate device-to-device (D2D) communication for NB-IoT delay-sensitive applications, such as healthcare-IoT services, to use two-hop communication instead of using a direct uplink. An optimization problem is formulated to achieve an optimal end-to-end delivery ratio (EDR). In addition, this study incorporates Q-Learning-based reinforcement learning (RL) for the selection of an optimal cellular relay, which assists NB-IoT UE in uploading sensitive data to BS/eNB. The proposed RL-intelligent-D2D (RL-ID2D) communication methodology selects the optimum relay with a maximum EDR, which ultimately augments energy efficiency

AN EFFICIENT INTERFERENCE AVOIDANCE SCHEME FOR DEVICE-TODEVICE ENABLED FIFTH GENERATION NARROWBAND INTERNET OF THINGS NETWOKS’

Narrowband Internet of Things (NB-IoT) is a low-power wide-area (LPWA) technology built on long-term evolution (LTE) functionalities and standardized by the 3rd-Generation Partnership Project (3GPP). Due to its support for massive machine-type communication (mMTC) and different IoT use cases with rigorous standards in terms of connection, energy efficiency, reachability, reliability, and latency, NB-IoT has attracted the research community. However, as the capacity needs for various IoT use cases expand, the LTE evolved packet core (EPC) system's numerous functionalities may become overburdened and suboptimal. Several research efforts are currently in progress to address these challenges. As a result, an overview of these efforts with a specific focus on the optimized architecture of the LTE EPC functionalities, the 5G architectural design for NB-IoT integration, the enabling technologies necessary for 5G NB-IoT, 5G new radio (NR) coexistence with NB-IoT, and feasible architectural deployment schemes of NB-IoT with cellular networks is discussed. This thesis also presents cloud-assisted relay with backscatter communication as part of a detailed study of the technical performance attributes and channel communication characteristics from the physical (PHY) and medium access control (MAC) layers of the NB-IoT, with a focus on 5G. The numerous drawbacks that come with simulating these systems are explored. The enabling market for NB-IoT, the benefits for a few use cases, and the potential critical challenges associated with their deployment are all highlighted. Fortunately, the cyclic prefix orthogonal frequency division multiplexing (CPOFDM) based waveform by 3GPP NR for improved mobile broadband (eMBB) services does not prohibit the use of other waveforms in other services, such as the NB-IoT service for mMTC. As a result, the coexistence of 5G NR and NB-IoT must be manageably orthogonal (or quasi-orthogonal) to minimize mutual interference that limits the form of freedom in the waveform's overall design. As a result, 5G coexistence with NB-IoT will introduce a new interference challenge, distinct from that of the legacy network, even though the NR's coexistence with NB-IoT is believed to improve network capacity and expand the coverage of the user data rate, as well as improves robust communication through frequency reuse. Interference challenges may make channel estimation difficult for NB-IoT devices, limiting the user performance and spectral efficiency. Various existing interference mitigation solutions either add to the network's overhead, computational complexity and delay or are hampered by low data rate and coverage. These algorithms are unsuitable for an NB-IoT network owing to the low-complexity nature. As a result, a D2D communication based interference-control technique becomes an effective strategy for addressing this problem. This thesis used D2D communication to decrease the network bottleneck in dense 5G NBIoT networks prone to interference. For D2D-enabled 5G NB-IoT systems, the thesis presents an interference-avoidance resource allocation that considers the less favourable cell edge NUEs. To simplify the algorithm's computing complexity and reduce interference power, the system divides the optimization problem into three sub-problems. First, in an orthogonal deployment technique using channel state information (CSI), the channel gain factor is leveraged by selecting a probable reuse channel with higher QoS control. Second, a bisection search approach is used to find the best power control that maximizes the network sum rate, and third, the Hungarian algorithm is used to build a maximum bipartite matching strategy to choose the optimal pairing pattern between the sets of NUEs and the D2D pairs. The proposed approach improves the D2D sum rate and overall network SINR of the 5G NB-IoT system, according to the numerical data. The maximum power constraint of the D2D pair, D2D's location, Pico-base station (PBS) cell radius, number of potential reuse channels, and cluster distance impact the D2D pair's performance. The simulation results achieve 28.35%, 31.33%, and 39% SINR performance higher than the ARSAD, DCORA, and RRA algorithms when the number of NUEs is twice the number of D2D pairs, and 2.52%, 14.80%, and 39.89% SINR performance higher than the ARSAD, RRA, and DCORA when the number of NUEs and D2D pairs are equal. As a result, a D2D sum rate increase of 9.23%, 11.26%, and 13.92% higher than the ARSAD, DCORA, and RRA when the NUE’s number is twice the number of D2D pairs, and a D2D’s sum rate increase of 1.18%, 4.64% and 15.93% higher than the ARSAD, RRA and DCORA respectively, with an equal number of NUEs and D2D pairs is achieved. The results demonstrate the efficacy of the proposed scheme. The thesis also addressed the problem where the cell-edge NUE's QoS is critical to challenges such as long-distance transmission, delays, low bandwidth utilization, and high system overhead that affect 5G NB-IoT network performance. In this case, most cell-edge NUEs boost their transmit power to maximize network throughput. Integrating cooperating D2D relaying technique into 5G NB-IoT heterogeneous network (HetNet) uplink spectrum sharing increases the system's spectral efficiency and interference power, further degrading the network. Using a max-max SINR (Max-SINR) approach, this thesis proposed an interference-aware D2D relaying strategy for 5G NB-IoT QoS improvement for a cell-edge NUE to achieve optimum system performance. The Lagrangian-dual technique is used to optimize the transmit power of the cell-edge NUE to the relay based on the average interference power constraint, while the relay to the NB-IoT base station (NBS) employs a fixed transmit power. To choose an optimal D2D relay node, the channel-to-interference plus noise ratio (CINR) of all available D2D relays is used to maximize the minimum cell-edge NUE's data rate while ensuring the cellular NUEs' QoS requirements are satisfied. Best harmonic mean, best-worst, half-duplex relay selection, and a D2D communication scheme were among the other relaying selection strategies studied. The simulation results reveal that the Max-SINR selection scheme outperforms all other selection schemes due to the high channel gain between the two communication devices except for the D2D communication scheme. The proposed algorithm achieves 21.27% SINR performance, which is nearly identical to the half-duplex scheme, but outperforms the best-worst and harmonic selection techniques by 81.27% and 40.29%, respectively. As a result, as the number of D2D relays increases, the capacity increases by 14.10% and 47.19%, respectively, over harmonic and half-duplex techniques. Finally, the thesis presents future research works on interference control in addition with the open research directions on PHY and MAC properties and a SWOT (Strengths, Weaknesses, Opportunities, and Threats) analysis presented in Chapter 2 to encourage further study on 5G NB-IoT

Architecture design for disaster resilient management network using D2D technology

Huge damages from natural disasters, such as earthquakes, floods, landslide, tsunamis, have been reported in recent years, claiming many lives, rendering millions homeless and causing huge financial losses worldwide. The lack of effective communication between the public rescue/safety agencies, rescue teams, first responders and trapped survivors/victims makes the situation even worse. Factors like dysfunctional communication networks, limited communications capacity, limited resources/services, data transformation and effective evaluation, energy, and power deficiency cause unnecessary hindrance in rescue and recovery services during a disaster. The new wireless communication technologies are needed to enhance life-saving capabilities and rescue services. In general, in order to improve societal resilience towards natural catastrophes and develop effective communication infrastructure, innovative approaches need to be initiated to provide improved quality, better connectivity in the events of natural and human disasters. In this thesis, a disaster resilient network architecture is proposed and analysed using multi-hop communications, clustering, energy harvesting, throughput optimization, reliability enhancement, adaptive selection, and low latency communications. It also examines the importance of mode selection, power management, frequency and time resource allocation to realize the promises of Long-term Evolution (LTE) Device to Device (D2D) communication. In particular, to support resilient and energy efficient communication in disaster-affected areas. This research is examined by thorough and vigorous simulations and validated through mathematical modelling. Overall, the impact of this research is twofold: i) it provides new technologies for effective inter- and intra-agency coordination system during a disaster event by establishing a stronger and resilient communication; and ii) It offers a potential solution for stakeholders such as governments, rescue teams, and general public with new informed information on how to establish effective policies to cope with challenges before, during and after the disaster events

20 Years of Evolution from Cognitive to Intelligent Communications

It has been 20 years since the concept of cognitive radio (CR) was proposed, which is an efficient approach to provide more access opportunities to connect massive wireless devices. To improve the spectrum efficiency, CR enables unlicensed usage of licensed spectrum resources. It has been regarded as the key enabler for intelligent communications. In this article, we will provide an overview on the intelligent communication in the past two decades to illustrate the revolution of its capability from cognition to artificial intelligence (AI). Particularly, this article starts from a comprehensive review of typical spectrum sensing and sharing, followed by the recent achievements on the AI-enabled intelligent radio. Moreover, research challenges in the future intelligent communications will be discussed to show a path to the real deployment of intelligent radio. After witnessing the glorious developments of CR in the past 20 years, we try to provide readers a clear picture on how intelligent radio could be further developed to smartly utilize the limited spectrum resources as well as to optimally configure wireless devices in the future communication systems.Comment: The paper has been accepted by IEEE Transactions on Cognitive Communications and Networkin

Task Allocation in Clusters of Cognitive Nodes: a Remuneration-aided Approach

In this work, we propose a remuneration-aided Game theoretical solution for task allocation in cognitive radio (CR) enabled Internet of things (IoT) scenarios, where cognitive nodes (CNs) in close proximity and with similar sensing capabilities are clustered around a cluster head (CH). We consider a framework in which task allocation in the system is driven by CNs with spectrum sensing capabilities. In the proposed approach, the CH assigns a remuneration to CNs for their contribution in spectrum sensing prior to initiating the task allocation procedure. Such remunerations can be used by CNs in proposing the bids to win the task in the Game. Hence a non-cooperative Game approach modelled as an auction process is proposed. We show that the proposed framework is able to exploit cognitive behaviour efficiently in conditions suitable for cognitive radios (low spectrum occupancy), and under the same conditions the overall system utility increases by 29% w.r.t the case when licensed users (LUs) occupy the band 70% of the time. Additionally, the framework allows the system to reap benefits of energy efficiency while experimenting cognitivity