472 research outputs found
Partial-duplex amplify-and-forward relaying: spectral efficiency analysis under self-interference
We propose a novel mode of operation for Amplify-and-Forward relays in which the spectra of the relay input and output signals partially overlap. This partial-duplex relaying mode encompasses half-duplex and full-duplex as particular cases. By viewing the partial-duplex relay as a bandwidth-preserving Linear Periodic Time-Varying system, an analysis of the spectral efficiency in the presence of self-interference is developed. In contrast with previous works, self-interference is regarded as a useful information-bearing component rather than simply assimilated to noise. This approach reveals that previous results regarding the impact of self-interference on (full-duplex) relay performance are overly pessimistic. Based on a frequency-domain interpretation of the effect of self-interference, a number of suboptimal decoding architectures at the destination node are also discussed. It is found that the partial-duplex relaying mode may provide an attractive tradeoff between spectral efficiency and receiver complexity.Agencia Estatal de Investigación | Ref. TEC2016-75103-C2-2-RAgencia Estatal de Investigación | Ref. TEC2016-76409-C2-2
Modelling, Dimensioning and Optimization of 5G Communication Networks, Resources and Services
This reprint aims to collect state-of-the-art research contributions that address challenges in the emerging 5G networks design, dimensioning and optimization. Designing, dimensioning and optimization of communication networks resources and services have been an inseparable part of telecom network development. The latter must convey a large volume of traffic, providing service to traffic streams with highly differentiated requirements in terms of bit-rate and service time, required quality of service and quality of experience parameters. Such a communication infrastructure presents many important challenges, such as the study of necessary multi-layer cooperation, new protocols, performance evaluation of different network parts, low layer network design, network management and security issues, and new technologies in general, which will be discussed in this book
Adaptive Modulation Schemes for Underwater Acoustic OFDM Communication
High data rate communication is challenging in underwater acoustic (UA) communication as UA channels vary fast along with the environmental factors. A real-time Orthogonal frequency-division multiplexing (OFDM) based adaptive UA communication system is studied in this research employing the National Instruments (NI) LabVIEW software and NI CompactDAQ device. The developed adaptive modulation schemes enhance the reliability of communication, guarantee continuous connectivity, ensure maximum performance under a fixed BER at all times and boost data rate
Waveform Design and Processing for Joint Wireless Communications and Sensing
Since the advent of radar/sensing systems, they have always had fixed frequencies for operation. Due to the exponential growth of communications systems, the need for dedicated spectrum for them also increased, causing spectrum scarcity for both communications and sensing. It was obvious that some form of flexible spectrum sharing was necessary between these two functionalities. Soon enough, this led the researchers to focus on joint communications and sensing (JCAS) systems that share spectral resources efficiently. The hardware convergence due to the similar functioning of the two systems complemented the frequency convergence of JCAS systems. In fact, JCAS is one of the prominent requirements in future sixth-generation (6G) communications systems.
This thesis focuses on integrating the sensing functionality on top of wireless mobile communications systems, such as in fifth-generation (5G). To facilitate effective JCAS, the thesis provides signal processing techniques for designing waveforms that optimally share the spectral resources, for single-input single-output (SISO) as well as multiple-input multiple-output (MIMO) systems. In addition, novel radar processing techniques are investigated for MIMO systems to better detect the targets in the environment.
The standard waveform in 5G, that is, orthogonal frequency-division multiplexing (OFDM), is also considered for joint waveform design. In such a communications system, the resources are usually not fully utilized and there exist unused subcarriers within the OFDM waveform. These subcarriers are filled with optimized samples to minimize the lower bounds of delay and velocity estimates’ error variances of sensing, for SISO JCAS systems. The simulations with standard-compliant 5G waveforms illustrate the improvements possible in sensing, while also helping to maximize the efficiency in the transmit power amplification process, along the same optimization scheme. The simulation results are complemented through practical radio-frequency measurements of an outdoor environment depicting the significant gains that can be obtained in the range–angle map of sensing, due to the waveform optimization.
For MIMO JCAS systems, apart from conventional communications streams, separate transmit (TX) streams are used to improve sensing performance through two separate schemes. One scheme involves optimizing the sensing streams to minimize the lower bounds of delay and angle estimates’ error variances of sensing. Simulation results indicate that the errors of sensing can be minimized while striking a good balance with the communications capacity. The other scheme depicts that the target detection can be enhanced using sensing streams on top of a communications stream. Specifically, the number of false targets detected can be significantly reduced in comparison to single-stream communication.
The antenna arrays in MIMO communications systems nowadays are a combination of analog and digital architectures, i.e., hybrid, instead of consisting of a fullydigital architecture, for reduced costs and power consumption. Radar processing in such a hybrid architecture with multiple TX streams is not straightforward in comparison to the conventional fully-digital MIMO radar. Hence, this thesis also provides novel radar processing techniques to obtain the range–angle and range–velocity maps of the sensed environment. The simulation results illustrate that the targets can be reliably detected through the proposed MIMO processing, while also providing super-resolution in the angular domain
Multifunction Radios and Interference Suppression for Enhanced Reliability and Security of Wireless Systems
Wireless connectivity, with its relative ease of over-the-air information sharing, is a key technological enabler that facilitates many of the essential applications, such as satellite navigation, cellular communication, and media broadcasting, that are nowadays taken for granted. However, that relative ease of over-the-air communications has significant drawbacks too. On one hand, the broadcast nature of wireless communications means that one receiver can receive the superposition of multiple transmitted signals. But on the other hand, it means that multiple receivers can receive the same transmitted signal. The former leads to congestion and concerns about reliability because of the limited nature of the electromagnetic spectrum and the vulnerability to interference. The latter means that wirelessly transmitted information is inherently insecure.
This thesis aims to provide insights and means for improving physical layer reliability and security of wireless communications by, in a sense, combining the two aspects above through simultaneous and same frequency transmit and receive operation. This is so as to ultimately increase the safety of environments where wireless devices function or where malicious wirelessly operated devices (e.g., remote-controlled drones) potentially raise safety concerns. Specifically, two closely related research directions are pursued. Firstly, taking advantage of in-band full-duplex (IBFD) radio technology to benefit the reliability and security of wireless communications in the form of multifunction IBFD radios. Secondly, extending the self-interference cancellation (SIC) capabilities of IBFD radios to multiradio platforms to take advantage of these same concepts on a wider scale.
Within the first research direction, a theoretical analysis framework is developed and then used to comprehensively study the benefits and drawbacks of simultaneously combining signals detection and jamming on the same frequency within a single platform. Also, a practical prototype capable of such operation is implemented and its performance analyzed based on actual measurements. The theoretical and experimental analysis altogether give a concrete understanding of the quantitative benefits of simultaneous same-frequency operations over carrying out the operations in an alternating manner. Simultaneously detecting and jamming signals specifically is shown to somewhat increase the effective range of a smart jammer compared to intermittent detection and jamming, increasing its reliability.
Within the second research direction, two interference mitigation methods are proposed that extend the SIC capabilities from single platform IBFD radios to those not physically connected. Such separation brings additional challenges in modeling the interference compared to the SIC problem, which the proposed methods address. These methods then allow multiple radios to intentionally generate and use interference for controlling access to the electromagnetic spectrum. Practical measurement results demonstrate that this effectively allows the use of cooperative jamming to prevent unauthorized nodes from processing any signals of interest, while authorized nodes can use interference mitigation to still access the same signals. This in turn provides security at the physical layer of wireless communications
Optimization of 5G Second Phase Heterogeneous Radio Access Networks with Small Cells
Due to the exponential increase in high data-demanding applications and their services per
coverage area, it is becoming challenging for the existing cellular network to handle the massive
sum of users with their demands. It is conceded to network operators that the current
wireless network may not be capable to shelter future traffic demands. To overcome the challenges
the operators are taking interest in efficiently deploying the heterogeneous network.
Currently, 5G is in the commercialization phase. Network evolution with addition of small
cells will develop the existing wireless network with its enriched capabilities and innovative
features. Presently, the 5G global standardization has introduced the 5G New Radio (NR) under
the 3rd Generation Partnership Project (3GPP). It can support a wide range of frequency
bands (<6 GHz to 100 GHz).
For different trends and verticals, 5G NR encounters, functional splitting and its cost evaluation
are well-thought-out. The aspects of network slicing to the assessment of the business
opportunities and allied standardization endeavours are illustrated. The study explores the
carrier aggregation (Pico cellular) technique for 4G to bring high spectral efficiency with the
support of small cell massification while benefiting from statistical multiplexing gain. One
has been able to obtain values for the goodput considering CA in LTE-Sim (4G), of 40 Mbps
for a cell radius of 500 m and of 29 Mbps for a cell radius of 50 m, which is 3 times higher
than without CA scenario (2.6 GHz plus 3.5 GHz frequency bands).
Heterogeneous networks have been under investigation for many years. Heterogeneous network
can improve users service quality and resource utilization compared to homogeneous
networks. Quality of service can be enhanced by putting the small cells (Femtocells or Picocells)
inside the Microcells or Macrocells coverage area. Deploying indoor Femtocells for 5G
inside the Macro cellular network can reduce the network cost. Some service providers have
started their solutions for indoor users but there are still many challenges to be addressed.
The 5G air-simulator is updated to deploy indoor Femto-cell with proposed assumptions with
uniform distribution. For all the possible combinations of apartments side length and transmitter
power, the maximum number of supported numbers surpassed the number of users
by more than two times compared to papers mentioned in the literature. Within outdoor environments,
this study also proposed small cells optimization by putting the Pico cells within
a Macro cell to obtain low latency and high data rate with the statistical multiplexing gain of
the associated users.
Results are presented 5G NR functional split six and split seven, for three frequency bands
(2.6 GHz, 3.5GHz and 5.62 GHz). Based on the analysis for shorter radius values, the best
is to select the 2.6 GHz to achieve lower PLR and to support a higher number of users, with
better goodput, and higher profit (for cell radius u to 400 m). In 4G, with CA, from the
analysis of the economic trade-off with Picocell, the Enhanced multi-band scheduler EMBS
provide higher revenue, compared to those without CA. It is clearly shown that the profit of
CA is more than 4 times than in the without CA scenario. This means that the slight increase
in the cost of CA gives back more than 4-time profit relatively to the ”without” CA scenario.Devido ao aumento exponencial de aplicações/serviços de elevado débito por unidade de
área, torna-se bastante exigente, para a rede celular existente, lidar com a enormes quantidades
de utilizadores e seus requisitos. É reconhecido que as redes móveis e sem fios atuais
podem não conseguir suportar a procura de tráfego junto dos operadores. Para responder
a estes desafios, os operadores estão-se a interessar pelo desenvolvimento de redes heterogéneas
eficientes. Atualmente, a 5G está na fase de comercialização. A evolução destas
redes concretizar-se-á com a introdução de pequenas células com aptidões melhoradas e
características inovadoras. No presente, os organismos de normalização da 5G globais introduziram
os Novos Rádios (NR) 5G no contexto do 3rd Generation Partnership Project
(3GPP). A 5G pode suportar uma gama alargada de bandas de frequência (<6 a 100 GHz).
Abordam-se as divisões funcionais e avaliam-se os seus custos para as diferentes tendências
e verticais dos NR 5G. Ilustram-se desde os aspetos de particionamento funcional da rede à
avaliação das oportunidades de negócio, aliadas aos esforços de normalização. Exploram-se
as técnicas de agregação de espetro (do inglês, CA) para pico células, em 4G, a disponibilização
de eficiência espetral, com o suporte da massificação de pequenas células, e o ganho
de multiplexagem estatística associado. Obtiveram-se valores do débito binário útil, considerando
CA no LTE-Sim (4G), de 40 e 29 Mb/s para células de raios 500 e 50 m, respetivamente,
três vezes superiores em relação ao caso sem CA (bandas de 2.6 mais 3.5 GHz).
Nas redes heterogéneas, alvo de investigação há vários anos, a qualidade de serviço e a utilização
de recursos podem ser melhoradas colocando pequenas células (femto- ou pico-células)
dentro da área de cobertura de micro- ou macro-células). O desenvolvimento de pequenas
células 5G dentro da rede com macro-células pode reduzir os custos da rede. Alguns prestadores
de serviços iniciaram as suas soluções para ambientes de interior, mas ainda existem
muitos desafios a ser ultrapassados. Atualizou-se o 5G air simulator para representar a
implantação de femto-células de interior com os pressupostos propostos e distribuição espacial
uniforme. Para todas as combinações possíveis do comprimento lado do apartamento, o
número máximo de utilizadores suportado ultrapassou o número de utilizadores suportado
(na literatura) em mais de duas vezes. Em ambientes de exterior, propuseram-se pico-células
no interior de macro-células, de forma a obter atraso extremo-a-extremo reduzido e taxa de
transmissão dados elevada, resultante do ganho de multiplexagem estatística associado.
Apresentam-se resultados para as divisões funcionais seis e sete dos NR 5G, para 2.6 GHz,
3.5GHz e 5.62 GHz. Para raios das células curtos, a melhor solução será selecionar a banda
dos 2.6 GHz para alcançar PLR (do inglês, PLR) reduzido e suportar um maior número de
utilizadores, com débito binário útil e lucro mais elevados (para raios das células até 400 m).
Em 4G, com CA, da análise do equilíbrio custos-proveitos com pico-células, o escalonamento
multi-banda EMBS (do inglês, Enhanced Multi-band Scheduler) disponibiliza proveitos superiores
em comparação com o caso sem CA. Mostra-se claramente que lucro com CA é mais
de quatro vezes superior do que no cenário sem CA, o que significa que um aumento ligeiro
no custo com CA resulta num aumento de 4-vezes no lucro relativamente ao cenário sem CA
Spectrally and Energy Efficient Wireless Communications: Signal and System Design, Mathematical Modelling and Optimisation
This thesis explores engineering studies and designs aiming to meeting the requirements of enhancing capacity and energy efficiency for next generation communication networks. Challenges of spectrum scarcity and energy constraints are addressed and new technologies are proposed, analytically investigated and examined.
The thesis commences by reviewing studies on spectrally and energy-efficient techniques, with a special focus on non-orthogonal multicarrier modulation, particularly spectrally efficient frequency division multiplexing (SEFDM). Rigorous theoretical and mathematical modelling studies of SEFDM are presented. Moreover, to address the potential application of SEFDM under the 5th generation new radio (5G NR) heterogeneous numerologies, simulation-based studies of SEFDM coexisting with orthogonal frequency division multiplexing (OFDM) are conducted. New signal formats and corresponding transceiver structure are designed, using a Hilbert transform filter pair for shaping pulses. Detailed modelling and numerical investigations show that the proposed signal doubles spectral efficiency without performance degradation, with studies of two signal formats; uncoded narrow-band internet of things (NB-IoT) signals and unframed turbo coded multi-carrier signals. The thesis also considers using constellation shaping techniques and SEFDM for capacity enhancement in 5G system. Probabilistic shaping for SEFDM is proposed and modelled to show both transmission energy reduction and bandwidth saving with advantageous flexibility for data rate adaptation. Expanding on constellation shaping to improve performance further, a comparative study of multidimensional modulation techniques is carried out. A four-dimensional signal, with better noise immunity is investigated, for which metaheuristic optimisation algorithms are studied, developed, and conducted to optimise bit-to-symbol mapping. Finally, a specially designed machine learning technique for signal and system design in physical layer communications is proposed, utilising the application of autoencoder-based end-to-end learning. Multidimensional signal modulation with multidimensional constellation shaping is proposed and optimised by using machine learning techniques, demonstrating significant improvement in spectral and energy efficiencies
- …