One way Doppler extractor. Volume 1: Vernier technique

A feasibility analysis, trade-offs, and implementation for a One Way Doppler Extraction system are discussed. A Doppler error analysis shows that quantization error is a primary source of Doppler measurement error. Several competing extraction techniques are compared and a Vernier technique is developed which obtains high Doppler resolution with low speed logic. Parameter trade-offs and sensitivities for the Vernier technique are analyzed, leading to a hardware design configuration. A detailed design, operation, and performance evaluation of the resulting breadboard model is presented which verifies the theoretical performance predictions. Performance tests have verified that the breadboard is capable of extracting Doppler, on an S-band signal, to an accuracy of less than 0.02 Hertz for a one second averaging period. This corresponds to a range rate error of no more than 3 millimeters per second

Design considerations for a monolithic, GaAs, dual-mode, QPSK/QASK, high-throughput rate transceiver

A monolithic, GaAs, dual mode, quadrature amplitude shift keying and quadrature phase shift keying transceiver with one and two billion bits per second data rate is being considered to achieve a low power, small and ultra high speed communication system for satellite as well as terrestrial purposes. Recent GaAs integrated circuit achievements are surveyed and their constituent device types are evaluated. Design considerations, on an elemental level, of the entire modem are further included for monolithic realization with practical fabrication techniques. Numerous device types, with practical monolithic compatability, are used in the design of functional blocks with sufficient performances for realization of the transceiver

Satellite on-board processing for earth resources data

Results of a survey of earth resources user applications and their data requirements, earth resources multispectral scanner sensor technology, and preprocessing algorithms for correcting the sensor outputs and for data bulk reduction are presented along with a candidate data format. Computational requirements required to implement the data analysis algorithms are included along with a review of computer architectures and organizations. Computer architectures capable of handling the algorithm computational requirements are suggested and the environmental effects of an on-board processor discussed. By relating performance parameters to the system requirements of each of the user requirements the feasibility of on-board processing is determined for each user. A tradeoff analysis is performed to determine the sensitivity of results to each of the system parameters. Significant results and conclusions are discussed, and recommendations are presented

VLSI technology and applications

Metal oxide semiconductor and GaAs devices are discussed. Digital and analog circuits are described. Applications to communications circuits are presented

Critical design issues for gallium arsenide VLSI circuits.

The aim of this research was to design and evaluate various Gallium Arsenide circuit elements such as logic gates, adders and multipliers suitable for high speed VLSI circuits. The issues addressed are the logic gate design and optimisation, evaluation of various buffering schemes and the impact of the algorithm on adder and multiplier performance for digital signal processing applications. This has led to the development of a design approach to produce high speed and low power dissipation Gallium Arsenide VLSI circuits. This is achieved by : Evaluating the well established Direct Coupled Logic (DCFL) gates and proposing an alternative gate, namely the Source Follower DCFL (SDCFL), to improve the noise margin and speed. Suggesting various buffering schemes to maintain high speed in areas where the fanout loading is high (eg. clock drivers). Comparing various adder types in terms of delay-power and delay-area products to arrive at a suitable architecture for Gallium Arsenide implementation and to determine the influence of the algorithm and layout approach on circuit performance. To investigate this further, a multiplier was also designed to assess the performance at higher levels of integration. Applying a new layout approach, called the 'ring notation*, to the adder and multiplier circuits in order to improve their delay-area product. Finally, the critical factors influencing the performance of the circuits are reviewed and a number of suggestions are given to maintain reliable operation at high speed

Second year technical report on-board processing for future satellite communications systems

Advanced baseband and microwave switching techniques for large domestic communications satellites operating in the 30/20 GHz frequency bands are discussed. The nominal baseband processor throughput is one million packets per second (1.6 Gb/s) from one thousand T1 carrier rate customer premises terminals. A frequency reuse factor of sixteen is assumed by using 16 spot antenna beams with the same 100 MHz bandwidth per beam and a modulation with a one b/s per Hz bandwidth efficiency. Eight of the beams are fixed on major metropolitan areas and eight are scanning beams which periodically cover the remainder of the U.S. under dynamic control. User signals are regenerated (demodulated/remodulated) and message packages are reformatted on board. Frequency division multiple access and time division multiplex are employed on the uplinks and downlinks, respectively, for terminals within the coverage area and dwell interval of a scanning beam. Link establishment and packet routing protocols are defined. Also described is a detailed design of a separate 100 x 100 microwave switch capable of handling nonregenerated signals occupying the remaining 2.4 GHz bandwidth with 60 dB of isolation, at an estimated weight and power consumption of approximately 400 kg and 100 W, respectively