Hydrogen Sensor Application of Anodic Titanium Oxide Nanostructures

Hydrogen (H2) fuel cells have been considered a promising renewable energy source. The recent growth of H2 economy has required highly sensitive, micro-sized and cost-effective H2 sensor for monitoring concentrations and alerting to leakages due to the flammability and explosiveness of H2 Titanium dioxide (TiO2) made by electrochemical anodic oxidation has shown great potential as a H2 sensing material. The aim of this thesis is to develop highly sensitive H2 sensor using anodized TiO2. The sensor enables mass production and integration with microelectronics by preparing the oxide layer on suitable substrate. Morphology, elemental composition, crystal phase, electrical properties and H2 sensing properties of TiO2 nanostructures prepared on Ti foil, Si and SiO2/Si substrates were characterized. Initially, vertically oriented TiO2 nanotubes as the sensing material were obtained by anodizing Ti foil. The morphological properties of tubes could be tailored by varying the applied voltages of the anodization. The transparent oxide layer creates an interference color phenomena with white light illumination on the oxide surface. This coloration effect can be used to predict the morphological properties of the TiO2 nanostructures. The crystal phase transition from amorphous to anatase or rutile, or the mixture of anatase and rutile was observed with varying heat treatment temperatures. However, the H2 sensing properties of TiO2 nanotubes at room temperature were insufficient. H2 sensors using TiO2 nanostructures formed on Si and SiO2/Si substrates were demonstrated. In both cases, a Ti layer deposited on the substrates by a DC magnetron sputtering method was successfully anodized. A mesoporous TiO2 layer obtained on Si by anodization in an aqueous electrolyte at 5°C showed diode behavior, which was influenced by the work function difference of Pt metal electrodes and the oxide layer. The sensor enabled the detection of H2 (20-1000 ppm) at low operating temperatures (50–140°C) in ambient air. A Pd decorated tubular TiO2 layer was prepared on metal electrodes patterned SiO2/Si wafer by anodization in an organic electrolyte at 5°C. The sensor showed significantly enhanced H2 sensing properties, and detected hydrogen in the range of a few ppm with fast response/recovery time. The metal electrodes placed under the oxide layer also enhanced the mechanical tolerance of the sensor. The concept of TiO2 nanostructures on alternative substrates could be a prospect for microelectronic applications and mass production of gas sensors. The gas sensor properties can be further improved by modifying material morphologies and decorating it with catalytic materials.Siirretty Doriast

Effect of titanium dioxide (TiO₂) nanoparticle coating on the detection performance of microfiber knot resonator sensors for relative humidity measurement

In this study, the sensitivity and the linearity of the un-coated and TiO2-coated microfiber knot resonator (MKR) have been analyzed. The MKR is very sensitive to humidity changes since its refractive index is strongly humidity dependent. As a result, shifts occur in the resonance wavelength and there are also changes in output power. The un-coated MKR showed a sensitivity of 1.3 pm/%RH, in terms of the resonance wavelength, and a sensitivity of 0.0626 dB/%RH for the transmitted output power. The sensitivity increased greatly after the deposition of a porous TiO2 nanoparticle coating on the MKR. The TiO2-coated MKR showed an improved sensitivity of 2.5 pm/%RH, with respect to the resonance wavelength, and 0.0836 dB/%RH for the transmitted output power. This MKR sensor has the potential for use in a variety of humidity sensing applications

Toward new gas-analytical multisensor chips based on titanium oxide nanotube array

Reliable environmental monitoring requires cost effective but highly sensitive and selective gas sensors. While the sensitivity of the sensors is improved by reducing the characteristic dimensions of the gas-sensing material, the selectivity is often approached by combining the sensors into multisensor arrays. The development of scalable methods to manufacture such arrays based on low-dimensional structures offers new perspectives for gas sensing applications. Here we examine an approach to produce multisensor array chips based on the TiO$_{x}$ nanotube layers segmented by multiple Pt strip electrodes. We study the sensitivity and selectivity of the developed chip at operating temperatures up to 400 °C towards organic vapors in the ppm range. The results indicate that the titania nanotubes are a promising material platform for novel cost-effective and powerful gas-analytical multisensor units

Artificial olfactory system for multi-component analysis of gas mixtures.

Gas analysis is an important part of our world and gas sensing technology is becoming more essential for various aspects of our life. A novel approach for gas mixture analysis by using portable gas chromatography in combination with an array of highly integrated and selective metal oxide (MOX) sensors has been studied. We developed a system with small size (7 x 13 x 16 inches), low power consumption (~10 W) and absence of special carrier gases designed for portable field analysis (assuming apriori calibration). Low ppb and even sub-ppb level of detection for some VOCs was achieved during the analysis of 50 ml of gas samples. A detailed description of our innovative design of multi-sensory platforms based on MOX sensors for multidimensional portable gas chromatography is provided in detail in this work. As a part of this effort, we successfully synthesized nanocomposite gas sensors based on SnO2 for selective detection of hydrogen sulfide, mercaptans, alcohols, ketones and heavy hydrocarbons. The morphology of the prepared sensors was closely studied by scanning electron microscopy (SEM), atomic force microscopy (AFM), transition electron microscopy (TEM) and X-Ray diffraction (XRD). Optical and electrical properties of polycrystalline SnO2 were investigated by using UV-Vis spectroscopy, transmission line measurement (TLM) and four probe resistance measurement techniques. Furthermore, more advanced gas sensing performance for detection of benzene, toluene, ethylbenzene, and O-xylene (BTEX) of polycrystalline SnO2 film (30 nm) coated with bimetal Au:Pd (9:1 molar ratio) nanoclusters was measured. Finally, besides the experimental result, the theoretical validation of the detector’s performance was provided based on high catalytic activity of nanocomposite materials and its superior electronic structure for gas detection compared to the polycrystalline SnO2. The theoretical background of gas chemisorption process at the surface of polycrystalline SnO2 was reviewed in this work. Furthermore, one dimensional Poisson equation relates surface energy states ( and ) and the bulk electronic structure ( and ) of polycrystalline SnO2. The main theory of electronic processes on the surface of semiconductors during the gas chemisorption was further applied in a case of nanocomposite materials

Metal oxide nanostructures for sensor applications

Electrorheological fluids have been paying a lot of attention due to their potential use in active control of various devices in mechanics, biomedicine or robotics. An electrorheological fluid consisting of polarizable particles dispersed in a non-conducting liquid is considered to be one of the most interesting and important smart fluids. This work presents the effect of the dopant, camphorsulphonic acid or citric acid, on the electrorheological behaviour of suspensions of doped polyaniline nanostructures dispersed in silicone oil, revealing its key role. The influence of carbon nanoparticle concentration has also been studied for these dispersions. All the samples showed an electrorheological effect, which increased with electric field and nanostructure concentration and decreased with silicone oil viscosity. However, the magnitude of this effect was strongly influenced not only by carbon nanoparticle concentration but also by the dopant material. The electrorheological effect was much lower with a higher carbon nanoparticle concentration and doped with citric acid. The latter is probably due to the different acidities of the dopants that lead to a different conductivity of polyaniline nanostructures. Furthermore, the effect of the carbon nanoparticles could be related to its charge trapping mechanism, while the charge transfer through the polymeric backbone occurs by hopping. Polyaniline/camphorsulphonic acid composite nanostructures dispersed in silicone oil exhibited the highest electrorheological activity, higher than three decades increase in apparent viscosity for low shear rates and high electric fields, showing their potential application as electrorheological smart materials.authorsversionpublishe

Control of the chemiluminescence spectrum with porous Bragg mirrors

Tunable, battery free light emission is demonstrated in a solid state device that is compatible with lab on a chip technology and easily fabricated via solution processing techniques. A porous one dimensional (1D) photonic crystal (also called Bragg stack or mirror) is infiltrated by chemiluminescence rubrene-based reagents. The Bragg mirror has been designed to have the photonic band gap overlapping with the emission spectrum of rubrene. The chemiluminescence reaction occurs in the intrapores of the photonic crystal and the emission spectrum of the dye is modulated according to the photonic band gap position. This is a compact, powerless emitting source that can be exploited in disposable photonic chip for sensing and point of care applications.Comment: 8 pages, 3 figure

Three-Dimensional Metal-Oxide Nanohelix Arrays Fabricated by Oblique Angle Deposition: Fabrication, Properties, and Applications

Three-dimensional (3D) nanostructured thin films have attracted great attention due to their novel physical, optical, and chemical properties, providing tremendous possibilities for future multifunctional systems and for exploring new physical phenomena. Among various techniques to fabricate 3D nanostructures, oblique angle deposition (OAD) is a very promising method for producing arrays of a variety of 3D nanostructures with excellent controllability, reproducibility, low cost, and compatibility with modern micro-electronic processes. This article presents a comprehensive overview of the principle of OAD, and unique structural and optical properties of OAD-fabricated thin films including excellent crystallinity, accurate tunability of refractive indices, and strong light scattering effect which can be utilized to remarkably enhance performances of various systems such as antireflection coatings, optical filters, photoelectrodes for solar-energy-harvesting cells, and sensing layers for various sensors.1114Ysciescopu

Hybrid Materials Based on Carbon Nanotubes and Graphene: Synthesis, Interfacial Processes, and Applications in Chemical Sensing

Development of hybrid nanostructures based on two or more building blocks can significantly expand the complexity and functionality of nanomaterials. For the specific objective of advanced sensing materials, single-walled carbon nanotubes and graphene have been recognized as ideal platforms, because of their unique physical and chemical properties. Other functional building blocks include polymers, metal and metal oxide nanostructures, and each of them has the potential to offer unique advances in the hybrid systems. In any case of constructing hybrid nanostructures, challenges exist in the controlling of composition, morphology and structure of different nanoscale building blocks, as well as the precise placement of these building blocks in the final assembly. Both objectives require systematical exploration of the synthetic conditions. Furthermore, there has been an increasing recognition of the fundamental importance of interface within the nanohybrid systems, which also requires detailed investigation. We have successfully developed several innovative synthetic strategies to regulate the assembly of nanoscale building blocks and to control the morphology of the hybrid systems based on graphitic carbon nanomaterials. We demonstrate the importance of surface chemistry of each building block in these approaches. Moreover, interfacial processes in the hybrid system have been carefully investigated to elucidate their impacts on the functions of the hybrid products. Specifically, we explored the synthesis and characterization of hybrid nanomaterials based on single-walled carbon nanotubes and graphene, with other building blocks including conducting polymers, metal, metal oxide and ceramic nanostructures. We demonstrated the development of core/shell morphology for polyaniline and titanium dioxide functionalized single-walled carbon nanotubes, and we showed a bottom-up synthesis of metal nanostructures that involves directed assembly and nanowelding of metal nanoparticles on the graphitic surfaces. Through electrical, electrochemical and spectroscopic characterizations, we further investigated their surface chemistry, interfacial interaction/processes, as well as their fundamental influence on the performance of the hybrid systems. We showed improved or even synergic properties for each hybrid system. Their chemical sensitivities, material stabilities, and charge separation efficiency were superior to individual components. These properties hold great promise in the real-world sensor applications, and can potentially benefit other research fields such as catalysis and green energy