Distributed multilevel optimization for complex structures

Optimization problems concerning complex structures with many design variables may entail an unacceptable computational cost. This problem can be reduced considerably with a multilevel approach: A structure consisting of several components is optimized as a whole (global) as well as on the component level. In this paper, an optimization method is discussed with applications in the assessment of the impact of new design considerations in the development of a structure. A strategy based on fully stressed design is applied for optimization problems in linear statics. A global model is used to calculate the interactions (e.g., loads) for each of the components. These components are then optimized using the prescribed interactions, followed by a new global calculation to update the interactions. Mixed discrete and continuous design variables as well as different design configurations are possible. An application of this strategy is presented in the form of the full optimization of a vertical tail plane center box of a generic large passenger aircraft. In linear dynamics, the parametrization of the component interactions is problematic due to the frequency dependence. Hence, a modified method is presented in which the speed of component mode synthesis is used to avoid this parametrization. This method is applied to a simple test case that originates from noise control. \u

A Novel Design Approach to X-Band Minkowski Reflectarray Antennas using the Full-Wave EM Simulation-based Complete Neural Model with a Hybrid GA-NM Algorithm

In this work, a novel multi-objective design optimization procedure is presented for the Minkowski Reflectarray RAs using a complete 3-D CST Microwave Studio MWS-based Multilayer Perceptron Neural Network MLP NN model including the substrate constant εr with a hybrid Genetic GA and Nelder-Mead NM algorithm. The MLP NN model provides an accurate and fast model and establishes the reflection phase of a unit Minkowski RA element as a continuous function within the input domain including the substrate 1 ≤ εr ≤ 6; 0.5mm ≤ h ≤ 3mm in the frequency between 8GHz ≤ f ≤ 12GHz. This design procedure enables a designer to obtain not only the most optimum Minkowski RA design all throughout the X- band, at the same time the optimum Minkowski RAs on the selected substrates. Moreover a design of a fully optimized X-band 15×15 Minkowski RA antenna is given as a worked example with together the tolerance analysis and its performance is also compared with those of the optimized RAs on the selected traditional substrates. Finally it may be concluded that the presented robust and systematic multi-objective design procedure is conveniently applied to the Microstrip Reflectarray RAs constructed from the advanced patches

Design optimization applied in structural dynamics

This paper introduces the design optimization strategies, especially for structures which have dynamic constraints. Design optimization involves first the modeling and then the optimization of the problem. Utilizing the Finite Element (FE) model of a structure directly in an optimization process requires a long computation time. Therefore the Backpropagation Neural Networks (NNs) are introduced as a so called surrogate model for the FE model. Optimization techniques mentioned in this study cover the Genetic Algorithm (GA) and the Sequential Quadratic Programming (SQP) methods. For the applications of the introduced techniques, a multisegment cantilever beam problem under the constraints of its first and second natural frequency has been selected and solved using four different approaches

Design Optimization Utilizing Dynamic Substructuring and Artificial Intelligence Techniques

In mechanical and structural systems, resonance may cause large strains and stresses which can lead to the failure of the system. Since it is often not possible to change the frequency content of the external load excitation, the phenomenon can only be avoided by updating the design of the structure. In this paper, a design optimization strategy based on the integration of the Component Mode Synthesis (CMS) method with numerical optimization techniques is presented. For reasons of numerical efficiency, a Finite Element (FE) model is represented by a surrogate model which is a function of the design parameters. The surrogate model is obtained in four steps: First, the reduced FE models of the components are derived using the CMS method. Then the components are aassembled to obtain the entire structural response. Afterwards the dynamic behavior is determined for a number of design parameter settings. Finally, the surrogate model representing the dynamic behavior is obtained. In this research, the surrogate model is determined using the Backpropagation Neural Networks which is then optimized using the Genetic Algorithms and Sequential Quadratic Programming method. The application of the introduced techniques is demonstrated on a simple test problem

Competent genetic-evolutionary optimization of water distribution systems

A genetic algorithm has been applied to the optimal design and rehabilitation of a water distribution system. Many of the previous applications have been limited to small water distribution systems, where the computer time used for solving the problem has been relatively small. In order to apply genetic and evolutionary optimization technique to a large-scale water distribution system, this paper employs one of competent genetic-evolutionary algorithms - a messy genetic algorithm to enhance the efficiency of an optimization procedure. A maximum flexibility is ensured by the formulation of a string and solution representation scheme, a fitness definition, and the integration of a well-developed hydraulic network solver that facilitate the application of a genetic algorithm to the optimization of a water distribution system. Two benchmark problems of water pipeline design and a real water distribution system are presented to demonstrate the application of the improved technique. The results obtained show that the number of the design trials required by the messy genetic algorithm is consistently fewer than the other genetic algorithms

Application of artificial neural network in market segmentation: A review on recent trends

Despite the significance of Artificial Neural Network (ANN) algorithm to market segmentation, there is a need of a comprehensive literature review and a classification system for it towards identification of future trend of market segmentation research. The present work is the first identifiable academic literature review of the application of neural network based techniques to segmentation. Our study has provided an academic database of literature between the periods of 2000-2010 and proposed a classification scheme for the articles. One thousands (1000) articles have been identified, and around 100 relevant selected articles have been subsequently reviewed and classified based on the major focus of each paper. Findings of this study indicated that the research area of ANN based applications are receiving most research attention and self organizing map based applications are second in position to be used in segmentation. The commonly used models for market segmentation are data mining, intelligent system etc. Our analysis furnishes a roadmap to guide future research and aid knowledge accretion and establishment pertaining to the application of ANN based techniques in market segmentation. Thus the present work will significantly contribute to both the industry and academic research in business and marketing as a sustainable valuable knowledge source of market segmentation with the future trend of ANN application in segmentation.Comment: 24 pages, 7 figures,3 Table

Towards the Evolution of Novel Vertical-Axis Wind Turbines

Renewable and sustainable energy is one of the most important challenges currently facing mankind. Wind has made an increasing contribution to the world's energy supply mix, but still remains a long way from reaching its full potential. In this paper, we investigate the use of artificial evolution to design vertical-axis wind turbine prototypes that are physically instantiated and evaluated under approximated wind tunnel conditions. An artificial neural network is used as a surrogate model to assist learning and found to reduce the number of fabrications required to reach a higher aerodynamic efficiency, resulting in an important cost reduction. Unlike in other approaches, such as computational fluid dynamics simulations, no mathematical formulations are used and no model assumptions are made.Comment: 14 pages, 11 figure

AI and OR in management of operations: history and trends

The last decade has seen a considerable growth in the use of Artificial Intelligence (AI) for operations management with the aim of finding solutions to problems that are increasing in complexity and scale. This paper begins by setting the context for the survey through a historical perspective of OR and AI. An extensive survey of applications of AI techniques for operations management, covering a total of over 1200 papers published from 1995 to 2004 is then presented. The survey utilizes Elsevier's ScienceDirect database as a source. Hence, the survey may not cover all the relevant journals but includes a sufficiently wide range of publications to make it representative of the research in the field. The papers are categorized into four areas of operations management: (a) design, (b) scheduling, (c) process planning and control and (d) quality, maintenance and fault diagnosis. Each of the four areas is categorized in terms of the AI techniques used: genetic algorithms, case-based reasoning, knowledge-based systems, fuzzy logic and hybrid techniques. The trends over the last decade are identified, discussed with respect to expected trends and directions for future work suggested