A sensor-less NBTI mitigation methodology for NoC architectures

CMOS technology improvement allows to increase the number of cores integrated on a single chip and makes Network-on-Chips (NoCs) a key component from the performance and reliability standpoints. Unfortunately, continuous scaling of CMOS technology poses severe concerns regarding failure mechanisms such as NBTI and stressmigration, that are crucial in achieving acceptable component lifetime. Process variation complicates the scenario, decreasing device lifetime and performance predictability during chip fabrication. This paper presents a novel sensor-less methodology to reduce the NBTI degradation in the on-chip network virtual channel buffers, considering process variation effects as well. Experimental validation is obtained using a cycle accurate simulator considering both real and synthetic traffic patterns. We compare our methodology to the best sensor-wise approach used as reference golden model. The proposed sensor-less strategy achieves results within 25% to the optimal sensor-wise methodology while this gap is reduced around 10% decreasing the number of virtual channels per input port. Moreover, our proposal can mitigate NBTI impact both in short and long run, since we recover both the most degraded VC (short run) as well as all the other VCs (long term)

Aging-Aware Routing Algorithms for Network-on-Chips

Network-on-Chip (NoC) architectures have emerged as a better replacement of the traditional bus-based communication in the many-core era. However, continuous technology scaling has made aging mechanisms, such as Negative Bias Temperature Instability (NBTI) and electromigration, primary concerns in NoC design. In this work, a novel system-level aging model is proposed to model the effects of aging in NoCs, caused due to (a) asymmetric communication patterns between the network nodes, and (b) runtime traffic variations due to routing policies. This work observes a critical need of a holistic aging analysis, which when combined with power-performance optimization, poses a multi-objective design challenge. To solve this problem, two different aging-aware routing algorithms are proposed: (a) congestion-oblivious Mixed Integer Linear Programming (MILP)-based routing algorithm, and (b) congestion-aware adaptive routing algorithm and router micro-architecture. After extensive experimental evaluations, proposed routing algorithms reduce aging-induced power-performance overheads while also improving the system robustness

Modeling DVFS and Power-Gating Actuators for Cycle-Accurate NoC-Based Simulators

Networks-on-chip (NoCs) are a widely recognized viable interconnection paradigm to support the multi-core revolution. One of the major design issues of multicore architectures is still the power, which can no longer be considered mainly due to the cores, since the NoC contribution to the overall energy budget is relevant. To face both static and dynamic power while balancing NoC performance, different actuators have been exploited in literature, mainly dynamic voltage frequency scaling (DVFS) and power gating. Typically, simulation-based tools are employed to explore the huge design space by adopting simplified models of the components. As a consequence, the majority of state-of-the-art on NoC power-performance optimization do not accurately consider timing and power overheads of actuators, or (even worse) do not consider them at all, with the risk of overestimating the benefits of the proposed methodologies. This article presents a simulation framework for power-performance analysis of multicore architectures with specific focus on the NoC. It integrates accurate power gating and DVFS models encompassing also their timing and power overheads. The value added of our proposal is manyfold: (i) DVFS and power gating actuators are modeled starting from SPICE-level simulations; (ii) such models have been integrated in the simulation environment; (iii) policy analysis support is plugged into the framework to enable assessment of different policies; (iv) a flexible GALS (globally asynchronous locally synchronous) support is provided, covering both handshake and FIFO re-synchronization schemas. To demonstrate both the flexibility and extensibility of our proposal, two simple policies exploiting the modeled actuators are discussed in the article

BlackOut: Enabling fine-grained power gating of buffers in Network-on-Chip routers

The Network-on-Chip (NoC) router buffers play an instrumental role in the performance of both the interconnection fabric and the entire multi-/many-core system. Nevertheless, the buffers also constitute the major leakage power consumers in NoC implementations. Traditionally, they are designed to accommodate worst-case traffic scenarios, so they tend to remain idle, or under-utilized, for extended periods of time. The under-utilization of these valuable resources is exemplified when one profiles real application workloads; the generated traffic is bursty in nature, whereby high traffic periods are sporadic and infrequent, in general. The mitigation of the leakage power consumption of NoC buffers via power gating has been explored in the literature, both at coarse (router-level) and fine (buffer-level) granularities. However, power gating at the router granularity is suitable only for low and medium traffic conditions, where the routers have enough opportunities to be powered down. Under high traffic, the sleeping potential rapidly diminishes. Moreover, disabling an entire router greatly affects the NoC functionality and the network connectivity. This article presents BlackOut, a fine-grained power-gating methodology targeting individual router buffers. The goal is to minimize leakage power consumption, without adversely impacting the system performance. The proposed framework is agnostic of the routing algorithm and the network topology, and it is applicable to any router micro-architecture. Evaluation results obtained using both synthetic traffic patterns and real applications in 64-core systems indicate energy savings of up to 70%, as compared to a baseline NoC, with a near-negligible performance overhead of around 2%. BlackOut is also shown to significantly outperformby 35%, on averagetwo current state-of-the-art power-gating solutions, in terms of energy savings. Not tailored to any topology, routing algorithm and NoC router architecture.Router-to-router communication. No need for custom, region-based/global networks.Effective at low, medium and high traffic. Other solutions are more restrictive.+35% energy saving, on average, against two state-of-the-art power-gating solutions.Negligible performance overhead (+2%) compared to the baseline architecture

Reliability-aware and energy-efficient system level design for networks-on-chip

2015 Spring.Includes bibliographical references.With CMOS technology aggressively scaling into the ultra-deep sub-micron (UDSM) regime and application complexity growing rapidly in recent years, processors today are being driven to integrate multiple cores on a chip. Such chip multiprocessor (CMP) architectures offer unprecedented levels of computing performance for highly parallel emerging applications in the era of digital convergence. However, a major challenge facing the designers of these emerging multicore architectures is the increased likelihood of failure due to the rise in transient, permanent, and intermittent faults caused by a variety of factors that are becoming more and more prevalent with technology scaling. On-chip interconnect architectures are particularly susceptible to faults that can corrupt transmitted data or prevent it from reaching its destination. Reliability concerns in UDSM nodes have in part contributed to the shift from traditional bus-based communication fabrics to network-on-chip (NoC) architectures that provide better scalability, performance, and utilization than buses. In this thesis, to overcome potential faults in NoCs, my research began by exploring fault-tolerant routing algorithms. Under the constraint of deadlock freedom, we make use of the inherent redundancy in NoCs due to multiple paths between packet sources and sinks and propose different fault-tolerant routing schemes to achieve much better fault tolerance capabilities than possible with traditional routing schemes. The proposed schemes also use replication opportunistically to optimize the balance between energy overhead and arrival rate. As 3D integrated circuit (3D-IC) technology with wafer-to-wafer bonding has been recently proposed as a promising candidate for future CMPs, we also propose a fault-tolerant routing scheme for 3D NoCs which outperforms the existing popular routing schemes in terms of energy consumption, performance and reliability. To quantify reliability and provide different levels of intelligent protection, for the first time, we propose the network vulnerability factor (NVF) metric to characterize the vulnerability of NoC components to faults. NVF determines the probabilities that faults in NoC components manifest as errors in the final program output of the CMP system. With NVF aware partial protection for NoC components, almost 50% energy cost can be saved compared to the traditional approach of comprehensively protecting all NoC components. Lastly, we focus on the problem of fault-tolerant NoC design, that involves many NP-hard sub-problems such as core mapping, fault-tolerant routing, and fault-tolerant router configuration. We propose a novel design-time (RESYN) and a hybrid design and runtime (HEFT) synthesis framework to trade-off energy consumption and reliability in the NoC fabric at the system level for CMPs. Together, our research in fault-tolerant NoC routing, reliability modeling, and reliability aware NoC synthesis substantially enhances NoC reliability and energy-efficiency beyond what is possible with traditional approaches and state-of-the-art strategies from prior work

Use It or Lose It: Proactive, Deterministic Longevity in Future Chip Multiprocessors

Ever since the VLSI process technology crossed the sub-micron threshold, there is an increased interest in design of fault-tolerant systems to mitigate the wearout of transistors. Hot Carrier Injection (HCI) and Negative Bias Temperature Instability (NBTI) are two prominent usage based transistor degradation mechanisms in the deep sub-micron process technologies. This wearout of transistors can lead to timing violations along the critical paths which will eventually lead to permanent failures of the chip. While there have been many studies which concentrate on decreasing the wearout in a single core, the failure of an individual core need not be catastrophic in the context of Chip Multi-Processors (CMPs). However, a failure in the interconnect in these CMPs can lead to the failure of entire chip as it could lead to protocol-level deadlocks, or even partition away vital components such as the memory controller or other critical I/O. Analysis of HCI and NBTI stresses caused by real workloads on interconnect microachitecture shows that wearout in the CMP on-chip interconnect is correlated with lack of load observed in the network-on-chip routers. It is proven that exercising the wearout-sensitive components of routers under low load with random inputs can decelerate the NBTI wearout. In this work, we propose a novel deterministic approach for the generation of appropriate exercise mode data to maximize the life-time improvement, ensuring design parameter targets are met. The results from this new proposed design yields ~2300x decrease in the rate of CMP wear due to NBTI compared to that of ~28x decrease shown by previous work

Exploiting Inter- and Intra-Memory Asymmetries for Data Mapping in Hybrid Tiered-Memories

Modern computing systems are embracing hybrid memory comprising of DRAM and non-volatile memory (NVM) to combine the best properties of both memory technologies, achieving low latency, high reliability, and high density. A prominent characteristic of DRAM-NVM hybrid memory is that it has NVM access latency much higher than DRAM access latency. We call this inter-memory asymmetry. We observe that parasitic components on a long bitline are a major source of high latency in both DRAM and NVM, and a significant factor contributing to high-voltage operations in NVM, which impact their reliability. We propose an architectural change, where each long bitline in DRAM and NVM is split into two segments by an isolation transistor. One segment can be accessed with lower latency and operating voltage than the other. By introducing tiers, we enable non-uniform accesses within each memory type (which we call intra-memory asymmetry), leading to performance and reliability trade-offs in DRAM-NVM hybrid memory. We extend existing NVM-DRAM OS in three ways. First, we exploit both inter- and intra-memory asymmetries to allocate and migrate memory pages between the tiers in DRAM and NVM. Second, we improve the OS's page allocation decisions by predicting the access intensity of a newly-referenced memory page in a program and placing it to a matching tier during its initial allocation. This minimizes page migrations during program execution, lowering the performance overhead. Third, we propose a solution to migrate pages between the tiers of the same memory without transferring data over the memory channel, minimizing channel occupancy and improving performance. Our overall approach, which we call MNEME, to enable and exploit asymmetries in DRAM-NVM hybrid tiered memory improves both performance and reliability for both single-core and multi-programmed workloads.Comment: 15 pages, 29 figures, accepted at ACM SIGPLAN International Symposium on Memory Managemen

A REAL TIME VISIBLE MODE INCORPORATING IN ROUTER CHANNEL

Accordingly, the odds of run-time problems or defects occurring in buffers and logic are considerably greater in contrast to other aspects of the NoC. Thus, test process for that NoC infrastructure must start with test of buffers and routing logic from the routers. The write failures are modeled as transition problems, while read failures are modeled as read disturb problems. We surveyed online test approaches for SRAM-based FIFOs generally. Laptop computer says SRAM based FIFOs are tested using either from the following two approaches, dedicated BIST approach. A transparent SOA-MATS   test generation formula has suggested targeting in-field permanent problems coded in SRAM based FIFO recollections and contains been employed to perform on the internet and periodic test of FIFO memory present inside the routers from the NoC. Use of SOA-MATS   test towards the FIFO involves writing patterns in to the FIFO memory and studying it well. Consequently, the memory contents are destroyed. However, online memory test techniques require restoration from the memory contents after test. The operations performed throughout the test represent three phases from the test, namely, invert phase, restore phase, and browse phase. The FIFO buffers are permitted to become operative in normal way of sufficient period of time before initiating their test process. This delay in test initiation provides the required time for run-time intermittent problems coded in FIFO buffers to change into permanent problems. Periodic testing of buffers prevents accumulation of problems as well as enables test of every location from the buffer. Simulation results reveal that periodic testing of FIFO buffers don't have much impact on the general throughput from the NoC except when buffers are tested too often

Energy and Reliability in Future NOC Interconnected CMPS

In this dissertation, I explore energy and reliability in future NoC (Network-on-Chip) interconnected CMPs (chip multiprocessors) as they have become a first-order constraint in future CMP design. In the first part, we target the root cause of network energy consumption through techniques that reduce link and router-level switching activity. We specifically focus on memory subsystem traffic, as it comprises the bulk of NoC load in a CMP. By transmitting only the flits that contain words that we predicted would be useful using a novel spatial locality predictor, our scheme seeks to reduce network activity. We aim to further lower NoC energy consumption through microarchitectural mechanisms that inhibit datapath switching activity caused by unused words in individual flits. Using simulation-based performance studies and detailed energy models based on synthesized router designs and different link wire types, we show that (a) the pre- diction mechanism achieves very high accuracy, with an average rate of false-unused prediction of just 2.5%; (b) the combined NoC energy savings enabled by the predictor and microarchitectural support are 36% on average and up to 57% in the best case; and (c) there is no system performance penalty as a result of this technique. In the second part, we present a method for dynamic voltage/frequency scaling of networks-on-chip and last level caches in CMP designs, where the shared resources form a single voltage/frequency domain. We develop a new technique for monitoring and control and validate it by running PARSEC benchmarks through full system simulations. These techniques reduce energy-delay product by 46% compared to a state-of-the-art prior work. In the third part, we develop critical path models for HCI- and NBTI-induced wear assuming stress caused under realistic workload conditions, and apply them onto the interconnect microarchitecture. A key finding from this modeling is that, counter to prevailing wisdom, wearout in the CMP on-chip interconnect is correlated with a lack of load observed in the NoC routers, rather than high load. We then develop a novel wearout-decelerating scheme in which routers under low load have their wearout-sensitive components exercised without significantly impacting the router’s cycle time, pipeline depth, and area or power consumption. We subsequently show that the proposed design yields a 13.8∼65× increase in CMP lifetime