Strain-Engineered MOSFETs

This book brings together new developments in the area of strain-engineered MOSFETs using high-mibility substrates such as SIGe, strained-Si, germanium-on-insulator and III-V semiconductors into a single text which will cover the materials aspects, principles, and design of advanced devices, their fabrication and applications. The book presents a full TCAD methodology for strain-engineering in Si CMOS technology involving data flow from process simulation to systematic process variability simulation and generation of SPICE process compact models for manufacturing for yield optimization

Journal of Telecommunications and Information Technology, 2007, nr 2

kwartalni

Reliability Investigations of MOSFETs using RF Small Signal Characterization

Modern technology needs and advancements have introduced various new concepts such as Internet-of-Things, electric automotive, and Artificial intelligence. This implies an increased activity in the electronics domain of analog and high frequency. Silicon devices have emerged as a cost-effective solution for such diverse applications. As these silicon devices are pushed towards higher performance, there is a continuous need to improve fabrication, power efficiency, variability, and reliability. Often, a direct trade-off of higher performance is observed in the reliability of semiconductor devices. The acceleration-based methodologies used for reliability assessment are the adequate time-saving solution for the lifetime's extrapolation but come with uncertainty in accuracy. Thus, the efforts to improve the accuracy of reliability characterization methodologies run in parallel. This study highlights two goals that can be achieved by incorporating high-frequency characterization into the reliability characteristics. The first one is assessing high-frequency performance throughout the device's lifetime to facilitate an accurate description of device/circuit functionality for high-frequency applications. Secondly, to explore the potential of high-frequency characterization as the means of scanning reliability effects within devices. S-parameters served as the high-frequency device's response and mapped onto a small-signal model to analyze different components of a fully depleted silicon-on-insulator MOSFET. The studied devices are subjected to two important DC stress patterns, i.e., Bias temperature instability stress and hot carrier stress. The hot carrier stress, which inherently suffers from the self-heating effect, resulted in the transistor's geometry-dependent magnitudes of hot carrier degradation. It is shown that the incorporation of the thermal resistance model is mandatory for the investigation of hot carrier degradation. The property of direct translation of small-signal parameter degradation to DC parameter degradation is used to develop a new S-parameter based bias temperature instability characterization methodology. The changes in gate-related small-signal capacitances after hot carrier stress reveals a distinct signature due to local change of flat-band voltage. The measured effects of gate-related small-signal capacitances post-stress are validated through transient physics-based simulations in Sentaurus TCAD.:Abstract Symbols Acronyms 1 Introduction 2 Fundamentals 2.1 MOSFETs Scaling Trends and Challenges 2.1.1 Silicon on Insulator Technology 2.1.2 FDSOI Technology 2.2 Reliability of Semiconductor Devices 2.3 RF Reliability 2.4 MOSFET Degradation Mechanisms 2.4.1 Hot Carrier Degradation 2.4.2 Bias Temperature Instability 2.5 Self-heating 3 RF Characterization of fully-depleted Silicon on Insulator devices 3.1 Scattering Parameters 3.2 S-parameters Measurement Flow 3.2.1 Calibration 3.2.2 De-embedding 3.3 Small-Signal Model 3.3.1 Model Parameters Extraction 3.3.2 Transistor Figures of Merit 3.4 Characterization Results 4 Self-heating assessment in Multi-finger Devices 4.1 Self-heating Characterization Methodology 4.1.1 Output Conductance Frequency dependence 4.1.2 Temperature dependence of Drain Current 4.2 Thermal Resistance Behavior 4.2.1 Thermal Resistance Scaling with number of fingers 4.2.2 Thermal Resistance Scaling with finger spacing 4.2.3 Thermal Resistance Scaling with GateWidth 4.2.4 Thermal Resistance Scaling with Gate length 4.3 Thermal Resistance Model 4.4 Design for Thermal Resistance Optimization 5 Bias Temperature Instability Investigation 5.1 Impact of Bias Temperature Instability stress on Device Metrics 5.1.1 Experimental Details 5.1.2 DC Parameters Drift 5.1.3 RF Small-Signal Parameters Drift 5.2 S-parameter based on-the-fly Bias Temperature Instability Characterization Method 5.2.1 Measurement Methodology 5.2.2 Results and Discussion 6 Investigation of Hot-carrier Degradation 6.1 Impact of Hot-carrier stress on Device performance 6.1.1 DC Metrics Degradation 6.1.2 Impact on small-signal Parameters 6.2 Implications of Self-heating on Hot-carrier Degradation in n-MOSFETs 6.2.1 Inclusion of Thermal resistance in Hot-carrier Degradation modeling 6.2.2 Convolution of Bias Temperature Instability component in Hot-carrier Degradation 6.2.3 Effect of Source and Drain Placement in Multi-finger Layout 6.3 Vth turn-around effect in p-MOSFET 7 Deconvolution of Hot-carrier Degradation and Bias Temperature Instability using Scattering parameters 7.1 Small-Signal Parameter Signatures for Hot-carrier Degradation and Bias Temperature Instability 7.2 TCAD Dynamic Simulation of Defects 7.2.1 Fixed Charges 7.2.2 Interface Traps near Gate 7.2.3 Interface Traps near Spacer Region 7.2.4 Combination of Traps 7.2.5 Drain Series Resistance effect 7.2.6 DVth Correction 7.3 Empirical Modeling based deconvolution of Hot-carrier Degradation 8 Conclusion and Recommendations 8.1 General Conclusions 8.2 Recommendations for Future Work A Directly measured S-parameters and extracted Y-parameters B Device Dimensions for Thermal Resistance Modeling C Frequency response of hot-carrier degradation (HCD) D Localization Effect of Interface Traps Bibliograph

Solid State Circuits Technologies

The evolution of solid-state circuit technology has a long history within a relatively short period of time. This technology has lead to the modern information society that connects us and tools, a large market, and many types of products and applications. The solid-state circuit technology continuously evolves via breakthroughs and improvements every year. This book is devoted to review and present novel approaches for some of the main issues involved in this exciting and vigorous technology. The book is composed of 22 chapters, written by authors coming from 30 different institutions located in 12 different countries throughout the Americas, Asia and Europe. Thus, reflecting the wide international contribution to the book. The broad range of subjects presented in the book offers a general overview of the main issues in modern solid-state circuit technology. Furthermore, the book offers an in depth analysis on specific subjects for specialists. We believe the book is of great scientific and educational value for many readers. I am profoundly indebted to the support provided by all of those involved in the work. First and foremost I would like to acknowledge and thank the authors who worked hard and generously agreed to share their results and knowledge. Second I would like to express my gratitude to the Intech team that invited me to edit the book and give me their full support and a fruitful experience while working together to combine this book

Advanced Silicon and Germanium Transistors for Future P-channel MOSFET Applications

Ph.DDOCTOR OF PHILOSOPH

Characterization of self-heating effects and assessment of its impact on reliability in finfet technology

The systematically growing power (heat) dissipation in CMOS transistors with each successive technology node is reaching levels which could impact its reliable operation. The emergence of technologies such as bulk/SOI FinFETs has dramatically confined the heat in the device channel due to its vertical geometry and it is expected to further exacerbate with gate-all-around transistors. This work studies heat generation in the channel of semiconductor devices and measures its dissipation by means of wafer level characterization and predictive thermal simulation. The experimental work is based on several existing device thermometry techniques to which additional layout improvements are made in state of the art bulk FinFET and SOI FinFET 14nm technology nodes. The sensors produce excellent matching results which are confirmed through TCAD thermal simulation, differences between sensor types are quantified and error bars on measurements are established. The lateral heat transport measurements determine that heat from the source is mostly dissipated at a distance of 1µm and 1.5µm in bulk FinFET and SOI FinFET, respectively. Heat additivity is successfully confirmed to prove and highlight the fact that the whole system needs to be considered when performing thermal analysis. Furthermore, an investigation is devoted to study self-heating with different layout densities by varying the number of fins and fingers per active region (RX). Fin thermal resistance is measured at different ambient temperatures to show its variation of up to 70% between -40°C to 175°C. Therefore, the Si fin has a more dominant effect in heat transport and its varying thermal conductivity should be taken into account. The effect of ambient temperature on self-heating measurement is confirmed by supplying heat through thermal chuck and adjacent heater devices themselves. Motivation for this work is the continuous evolution of the transistor geometry and use of exotic materials, which in the recent technology nodes made heat removal more challenging. This poses reliability and performance concerns. Therefore, this work studies the impact of self-heating on reliability testing at DC conditions as well as realistic CMOS logic operating (AC) conditions. Front-end-of-line (FEOL) reliability mechanisms, such as hot carrier injection (HCI) and non-uniform time dependent dielectric breakdown (TDDB), are studied to show that self-heating effects can impact measurement results and recommendations are given on how to mitigate them. By performing an HCI stress at moderate bias conditions, this dissertation shows that the laborious techniques of heat subtraction are no longer necessary. Self-heating is also studied at more realistic device switching conditions by utilizing ring oscillators with several densities and stage counts to show that self-heating is considerably lower compared to constant voltage stress conditions and degradation is not distinguishable

Insulators for 2D nanoelectronics: the gap to bridge

Nanoelectronic devices based on 2D materials are far from delivering their full theoretical performance potential due to the lack of scalable insulators. Amorphous oxides that work well in silicon technology have ill-defined interfaces with 2D materials and numerous defects, while 2D hexagonal boron nitride does not meet required dielectric specifications. The list of suitable alternative insulators is currently very limited. Thus, a radically different mindset with respect to suitable insulators for 2D technologies may be required. We review possible solution scenarios like the creation of clean interfaces, production of native oxides from 2D semiconductors and more intensive studies on crystalline insulators

Scaling and variability in ultra thin body silicon on insulator (UTB SOI) MOSFETs

The main objective of this thesis is to perform a comprehensive simulation study of the statistical variability in well scaled fully depleted ultra thin body silicon on insulator (FD-UTB SOI) at nanometer regime. It describes the design procedure for template FDUTB SOI transistor scaling and the impacts of statistical variability and reliability the scaled template transistor. The starting point of this study is a systematic simulation analysis based on a welldesigned 32nm thin body SOI template transistor provided by the FP7 project PULLNANO. The 32nm template transistor is consistent with the International Technology Roadmap for Semiconductor (ITRS) 2009 specifications. The wellestablished 3D ‘atomistic’ simulator GARAND has been employed in the designing of the scaled transistors and to carry out the statistical variability simulations. Following the foundation work in characterizing and optimizing the template 32 nm gate length transistor, the scaling proceeds down to 22 nm, 16 nm and 11 nm gate lengths using typically 0.7 scaling factor in respect of the horizontal and vertical transistor dimensions. The device design process is targeted for low power applications with a careful consideration of the impacts of the design parameters choice including buried oxide thickness (TBOX), source/drain doping abruptness (σ) and spacer length (Lspa). In order to determine the values of TBOX, σ, and Lspa, it is important to analyze simulation results, carefully assessing the impact on manufacturability and to consider the corresponding trade-off between short channel effects and on-current performance. Considering the above factors, TBOX = 10nm, σ = 2nm/dec and Lspa = 7nm have been adopted as optimum values respectively. iv The statistical variability of the transistor characteristics due to intrinsic parameter fluctuation (IPF) in well-scaled FD-UTB SOI devices is systematically studied for the first time. The impact of random dopant fluctuation (RDF), line edge roughness (LER) and metal gate granularity (MGG) on threshold voltage (Vth), on-current (Ion) and drain induced barrier lowering (DIBL) are analysed. Each principal sources of variability is treated individually and in combination with other variability sources in the simulation of large ensembles of microscopically different devices. The introduction of highk/ metal gate stack has improved the electrostatic integrity and enhanced the overall device performance. However, in the case of fully depleted channel transistors, MGG has become a dominant variability factor for all critical electrical parameters at gate first technology. For instance, σVth due to MGG increased to 41.9 mV at 11nm gate length compared to 26.0 mV at 22nm gate length. Similar trend has also been observed in σIon, increasing from 0.065 up to 0.174 mA/μm when the gate length is reduced from 22 nm down to 11 nm. Both RDF and LER have significant role in the intrinsic parameter fluctuations and therefore, none of these sources should be overlooked in the simulations. Finally, the impact of different variability sources in combination with positive bias temperature instability (PBTI) degradation on Vth, Ion and DIBL of the scaled nMOSFETs is investigated. Our study indicates that BTI induced charge trapping is a crucial reliability problem for the FD-UTB SOI transistors operation. Its impact not only introduces a significant degradation of transistor performance, but also accelerates the statistical variability. For example, the effect of a late degradation stage (at trap density of 1e12/cm2) in the presence of RDF, LER and MGG results in σVth increase to 36.9 mV, 45.0 mV and 58.3 mV for 22 nm, 16 nm and 11 nm respectively from the original 29.0 mV, 37.9 mV and 50.4 mV values in the fresh transistors

Etude des transistors MOSFET à barrière Schottky, à canal Silicium et Germanium sur couches minces

Until the early 2000’s Dennard’s scaling rules at the transistor level have enabled to achieve a performance gain while still preserving the basic structure of the MOSFET building block from one generation to the next. However, this conservative approach has already reached its limits as shown by the introduction of channel stressors for the sub-130 nm technological nodes, and later high-k/metal gate stacks for the sub-65 nm nodes. Despite the introduction of high-k gate dielectrics, constraints in terms of gate leakage and reliability have been delaying the diminution of the equivalent oxide thickness (EOT). Concurrently, lowering the supply voltage (VDD) has become a critical necessity to reduce both the active and passive power density in integrated circuits. Hence the challenge: how to keep decreasing both gate length and supply voltage faster than the EOT without losing in terms of ON-state/OFF-state performance trade-off? Several solutions can be proposed aiming at solving this conundrum for nanoscale transistors, with architectures in rupture with the plain old Silicon-based MOSFET with doped Source and Drain invented in 1960. One approach consists in achieving an ION increase while keeping IOFF (and Vth) mostly unchanged. Specifically, two options are considered in detail in this manuscript through a review of their respective historical motivations, state-of-the-art results as well as remaining fundamental (and technological) challenges: i/ the reduction of the extrinsic parasitic resistance through the implementation of metallic Source and Drain (Schottky Barrier FET architecture); ii/ the reduction of the intrinsic channel resistance through the implementation of Germanium-based mobility boosters (Ge CMOS, compressively-strained SiGe channels, n-sSi/p-sSiGe Dual Channel co-integration). In particular, we study the case of thin films on insulator (SOI, SiGeOI, GeOI substrates), a choice justified by: the preservation of the electrostatic integrity for the targeted sub-22nm nodes; the limitation of ambipolar leakage in SBFETs; the limitation of junction leakage in (low-bandgap) Ge-based FETs. Finally, we show why, and under which conditions the association of the SBFET architecture with a Ge-based channel could be potentially advantageous with respect to conventional Si CMOS.Jusqu’au début des années 2000, les règles de scaling de Dennard ont permis de réaliser des gains en performance tout en conservant la structure de la brique de base transistor d’une génération technologique à la suivante. Cependant, cette approche conservatrice a d’ores et déjà atteint ses limites, comme en témoigne l’introduction de la contrainte mécanique pour les générations sub-130nm, et les empilements de grille métal/high-k pour les nœuds sub-65nm. Malgré l’introduction de diélectriques à forte permittivité, des limites en termes de courants de fuite de grille et de fiabilité ont ralenti la diminution de l’épaisseur équivalente d’oxyde (EOT). De façon concommitante, la diminution de la tension d’alimentation (VDD) est devenue une priorité afin de réduire la densité de puissance dissipée dans les circuits intégrés. D’où le défi actuel: comment continuer de réduire à la fois la longueur de grille et la tension d’alimentation plus rapidement que l’EOT sans pour autant dégrader le rapport de performances aux états passant et bloqué (ON et OFF) ? Diverses solutions peuvent être proposées, passant par des architectures s’éloignant du MOSFET conventionnel à canal Si avec source et drain dopés tel que défini en 1960. Une approche consiste en réaliser une augmentation du courant passant (ION) tout en laissant le courant à l’état bloqué (IOFF) et la tension de seuil (Vth) inchangés. Concrètement, deux options sont considérées en détail dans ce manuscrit à travers une revue de leurs motivations historiques respectives, les résultats de l’état de l’art ainsi que les obstacles (fondamentaux et technologiques) à leur mise en œuvre : i/ la réduction de la résistance parasite extrinsèque par l’introduction de source et drain métalliques (architecture transistor à barrière Schottky) ; ii/ la réduction de la résistance de canal intrinsèque par l’introduction de matériaux à haute mobilité à base de Germanium (CMOS Ge, canaux SiGe en contrainte compressive, co-intégration Dual Channel n-sSi/p-sSiGe). En particulier, nous étudions le cas de couches minces sur isolant (substrats SOI, SiGeOI, GeOI), un choix motivé par: la préservation de l’intégrité électrostatique pour les nœuds technologiques sub-22nm; la limitation du courant de fuite ambipolaire dans les SBFETs; la limitation du courant de fuites de jonctions dans les MOSFETs à base de Ge (qui est un matériau à faible bandgap). Enfin, nous montrons pourquoi et dans quelles conditions l’association d’une architecture SBFET et d’un canal à base de Germanium peut être avantageuse vis-à-vis du CMOS Silicium conventionnel

Analyse et modélisation des phénomènes de mismatch des transistors MOSFET avancées

For correct operation, certain analog and digital circuits, such as current mirrors or SRAM, require pairs of MOS transistors that are electrically identical. Real devices, however, suffer from random local variations in the electrical parameters, a problem referred to as mismatch. The aim of this thesis is to understand the physical causes of mismatch, to quantify this phenomenon, and to propose solutions that enable to reduce its effects. In this context, four major areas are treated. The first one focuses on the optimization of mismatch measurement methodologies. A new technique for the measurement of Vt and β mismatch and an ID mismatch model are proposed, analyzed and applied to experimental data for 28 nm Bulk and FD SOI technologies. The second area focuses on the characterization of different configurations of MOS transistors in order to propose design architectures that are optimized for certain applications. Specifically, the possibility of replacing LDEMOS with transistors in cascode configuration is analyzed. The third area focuses on the analysis and modeling of mismatch phenomena in advanced Bulk and SOI transistors. Three aspects are analyzed: 1) the impact of the introduction of germanium in P channel of 28nm BULK transistors; 2) the elimination of the metal gate contribution to Vt mismatch by using 20nm Gate-last Bulk technology; 3) a descriptive study of the principal contributions to Vt, β and ID mismatch in 28 and 14 nm FD SOI technologies. The last area treats the mismatch trends with transistor aging. NBTI stress tests were applied to PMOS 28nm FD SOI transistors. Models of the Vt and β mismatch trends as a function of the induced interface traps and fixed charges at the Si/SiO2 interface and in the oxide were developed and discussed.Afin de réaliser correctement leur fonction, certains blocs analogiques ou numériques comme les miroirs de courant ou les SRAM, nécessitent des paires de transistors MOS électriquement identiques. Cependant, les dispositifs sur silicium, même appariés, subissent des variations locales aléatoires ce qui fait varier leurs performances électriques. Ce phénomène est connu sous le nom désappariement. L'objectif de cette thèse est de comprendre les causes physiques de ce désappariement, de le quantifier et de proposer des solutions pour le réduire. Dans ce contexte, quatre thèmes principaux sont développés. Le premier thème se focalise sur l'optimisation des méthodologies de mesures des phénomènes de désappariement. Une nouvelle méthode de mesure du désappariement de Vt et de β ainsi qu'un nouveau modèle de désappariement de ID sont proposés, analysés et appliqués à des données mesurées sur des technologies 28nm Bulk et FD SOI. Le second thème se concentre sur la caractérisation des différentes configurations de transistor MOS afin de proposer l'architecture optimale en fonction des applications visées. Ainsi, la possibilité de remplacer le LDEMOS par une configuration cascode est analysée en détail. Le troisième thème se focalise sur l'analyse et la modélisation des phénomènes de désappariement des transistors MOS avancés. Trois aspects sont analysés : 1) l'introduction du Ge dans le canal P des technologies 28nm BULK, 2) la suppression de la contribution de la grille sur le désappariement de Vt en utilisant la technologie 20 nm métal-Gate-Last 3) un descriptif des principaux contributeurs au désappariement de Vt, β et ID dans les technologies 28 et 14nm FD SOI. Le dernier thème traite du comportement du désappariement des transistors MOS après vieillissement. Un vieillissement NBTI a été appliqué sur des PMOS de la technologie 28nm FD SOI. Des modèles de comportement de Vt et de β en fonction du nombre de charges fixes ou d'états d'interfaces induits à l'interface Si/SiO2 ou dans l'oxyde sont proposés et analysés