Cross-Layer Resiliency Modeling and Optimization: A Device to Circuit Approach

The never ending demand for higher performance and lower power consumption pushes the VLSI industry to further scale the technology down. However, further downscaling of technology at nano-scale leads to major challenges. Reduced reliability is one of them, arising from multiple sources e.g. runtime variations, process variation, and transient errors. The objective of this thesis is to tackle unreliability with a cross layer approach from device up to circuit level

Resilient Design for Process and Runtime Variations

The main objective of this thesis is to tackle the impact of parameter variations in order to improve the chip performance and extend its lifetime

Energy Saving and Scavenging in Stand-alone and Large Scale Distributed Systems.

This thesis focuses on energy management techniques for distributed systems such as hand-held mobile devices, sensor nodes, and data center servers. One of the major design problems in multiple application domains is the mismatch between workloads and resources. Sub-optimal assignment of workloads to resources can cause underloaded or overloaded resources, resulting in performance degradation or energy waste. This work specifically focuses on the heterogeneity in system hardware components and workloads. It includes energy management solutions for unregulated or batteryless embedded systems; and data center servers with heterogeneous workloads, machines, and processor wear states. This thesis describes four major contributions: (1) This thesis describes a battery test and energy delivery system design process to maintain battery life in embedded systems without voltage regulators. (2) In battery-less sensor nodes, this thesis demonstrates a routing protocol to maintain reliable transmission through the sensor network. (3) This thesis has characterized typical workloads and developed two models to capture the heterogeneity of data center tasks and machines: a task performance model and a machine resource utilization model. These models allow users to predict task finish time on individual machines. It then integrates these two models into a task scheduler based on the Hadoop framework for MapReduce tasks, and uses this scheduler for server energy minimization using task concentration. (4) In addition to saving server energy consumption, this thesis describes a method of reducing data center cooling energy by maintaining optimal server processor temperature setpoints through a task assignment algorithm. This algorithm considers the reliability impact of processor wear states. It records processor wear states through automatic timing slack tests on a cluster of machines with varying core temperatures, voltages, and frequencies. These optimal temperature setpoints are used in a task scheduling algorithm that saves both server and cooling energy.PhDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/116746/1/xjhe_1.pd

Identification and Rejuvenation of NBTI-Critical Logic Paths in Nanoscale Circuits

The Negative Bias Temperature Instability (NBTI) phenomenon is agreed to be one of the main reliability concerns in nanoscale circuits. It increases the threshold voltage of pMOS transistors, thus, slows down signal propagation along logic paths between flip-flops. NBTI may cause intermittent faults and, ultimately, the circuit’s permanent functional failures. In this paper, we propose an innovative NBTI mitigation approach by rejuvenating the nanoscale logic along NBTI-critical paths. The method is based on hierarchical identification of NBTI-critical paths and the generation of rejuvenation stimuli using an Evolutionary Algorithm. A new, fast, yet accurate model for computation of NBTI-induced delays at gate-level is developed. This model is based on intensive SPICE simulations of individual gates. The generated rejuvenation stimuli are used to drive those pMOS transistors to the recovery phase, which are the most critical for the NBTI-induced path delay. It is intended to apply the rejuvenation procedure to the circuit, as an execution overhead, periodically. Experimental results performed on a set of designs demonstrate reduction of NBTI-induced delays by up to two times with an execution overhead of 0.1 % or less. The proposed approach is aimed at extending the reliable lifetime of nanoelectronics

Cross-Layer Approaches for an Aging-Aware Design of Nanoscale Microprocessors

Thanks to aggressive scaling of transistor dimensions, computers have revolutionized our life. However, the increasing unreliability of devices fabricated in nanoscale technologies emerged as a major threat for the future success of computers. In particular, accelerated transistor aging is of great importance, as it reduces the lifetime of digital systems. This thesis addresses this challenge by proposing new methods to model, analyze and mitigate aging at microarchitecture-level and above

Dynamic Lifetime Reliability and Energy Management for Network-on-Chip based Chip Multiprocessors

In this dissertation, we study dynamic reliability management (DRM) and dynamic energy management (DEM) techniques for network-on-chip (NoC) based chip multiprocessors (CMPs). In the first part, the proposed DRM algorithm takes both the computational and the communication components of the CMP into consideration and combines thread migration and dynamic voltage and frequency scaling (DVFS) as the two primary techniques to change the CMP operation. The goal is to increase the lifetime reliability of the overall system to the desired target with minimal performance degradation. The simulation results on a variety of benchmarks on 16 and 64 core NoC based CMP architectures demonstrate that lifetime reliability can be improved by 100% for an average performance penalty of 7.7% and 8.7% for the two CMP architectures. In the second part of this dissertation, we first propose novel algorithms that employ Kalman filtering and long short term memory (LSTM) for workload prediction. These predictions are then used as the basis on which voltage/frequency (V/F) pairs are selected for each core by an effective dynamic voltage and frequency scaling algorithm whose objective is to reduce energy consumption but without degrading performance beyond the user set threshold. Secondly, we investigate the use of deep neural network (DNN) models for energy optimization under performance constraints in CMPs. The proposed algorithm is implemented in three phases. The first phase collects the training data by employing Kalman filtering for workload prediction and an efficient heuristic algorithm based on DVFS. The second phase represents the training process of the DNN model and in the last phase, the DNN model is used to directly identify V/F pairs that can achieve lower energy consumption without performance degradation beyond the acceptable threshold set by the user. Simulation results on 16 and 64 core NoC based architectures demonstrate that the proposed approach can achieve up to 55% energy reduction for 10% performance degradation constraints. Simulation experiments compare the proposed algorithm against existing approaches based on reinforcement learning and Kalman filtering and show that the proposed DNN technique provides average improvements in energy-delay-product (EDP) of 6.3% and 6% for the 16 core architecture and of 7.4% and 5.5% for the 64 core architecture

Exploiting heterogeneity in Chip-Multiprocessor Design

In the past decade, semiconductor manufacturers are persistent in building faster and smaller transistors in order to boost the processor performance as projected by Moore’s Law. Recently, as we enter the deep submicron regime, continuing the same processor development pace becomes an increasingly difficult issue due to constraints on power, temperature, and the scalability of transistors. To overcome these challenges, researchers propose several innovations at both architecture and device levels that are able to partially solve the problems. These diversities in processor architecture and manufacturing materials provide solutions to continuing Moore’s Law by effectively exploiting the heterogeneity, however, they also introduce a set of unprecedented challenges that have been rarely addressed in prior works. In this dissertation, we present a series of in-depth studies to comprehensively investigate the design and optimization of future multi-core and many-core platforms through exploiting heteroge-neities. First, we explore a large design space of heterogeneous chip multiprocessors by exploiting the architectural- and device-level heterogeneities, aiming to identify the optimal design patterns leading to attractive energy- and cost-efficiencies in the pre-silicon stage. After this high-level study, we pay specific attention to the architectural asymmetry, aiming at developing a heterogeneity-aware task scheduler to optimize the energy-efficiency on a given single-ISA heterogeneous multi-processor. An advanced statistical tool is employed to facilitate the algorithm development. In the third study, we shift our concentration to the device-level heterogeneity and propose to effectively leverage the advantages provided by different materials to solve the increasingly important reliability issue for future processors

Thermal Management for Dependable On-Chip Systems

This thesis addresses the dependability issues in on-chip systems from a thermal perspective. This includes an explanation and analysis of models to show the relationship between dependability and tempature. Additionally, multiple novel methods for on-chip thermal management are introduced aiming to optimize thermal properties. Analysis of the methods is done through simulation and through infrared thermal camera measurements

Ingress of threshold voltage-triggered hardware trojan in the modern FPGA fabric–detection methodology and mitigation

The ageing phenomenon of negative bias temperature instability (NBTI) continues to challenge the dynamic thermal management of modern FPGAs. Increased transistor density leads to thermal accumulation and propagates higher and non-uniform temperature variations across the FPGA. This aggravates the impact of NBTI on key PMOS transistor parameters such as threshold voltage and drain current. Where it ages the transistors, with a successive reduction in FPGA lifetime and reliability, it also challenges its security. The ingress of threshold voltage-triggered hardware Trojan, a stealthy and malicious electronic circuit, in the modern FPGA, is one such potential threat that could exploit NBTI and severely affect its performance. The development of an effective and efficient countermeasure against it is, therefore, highly critical. Accordingly, we present a comprehensive FPGA security scheme, comprising novel elements of hardware Trojan infection, detection, and mitigation, to protect FPGA applications against the hardware Trojan. Built around the threat model of a naval warship’s integrated self-protection system (ISPS), we propose a threshold voltage-triggered hardware Trojan that operates in a threshold voltage region of 0.45V to 0.998V, consuming ultra-low power (10.5nW), and remaining stealthy with an area overhead as low as 1.5% for a 28 nm technology node. The hardware Trojan detection sub-scheme provides a unique lightweight threshold voltage-aware sensor with a detection sensitivity of 0.251mV/nA. With fixed and dynamic ring oscillator-based sensor segments, the precise measurement of frequency and delay variations in response to shifts in the threshold voltage of a PMOS transistor is also proposed. Finally, the FPGA security scheme is reinforced with an online transistor dynamic scaling (OTDS) to mitigate the impact of hardware Trojan through run-time tolerant circuitry capable of identifying critical gates with worst-case drain current degradation