Laser geodynamic satellite thermal/optical/vibrational analyses and testing. Volume 1: Executive summary

The results of the LAGEOS Thermal/Optical/Vibrational Analyses and test program conducted for the National Aeronautics and Space Administration are presented. The purpose of this study is to verify, through analysis and test, that the MSFC LAGEOS design inherently provides a retroreflector thermal environment which maintains acceptable retroreflector internal thermal gradients. Acceptable thermal gradients are those which result in less than 50% degradation of optical performance from isothermal optical performance. This volume provides an executive summary of the study program. It summarizes the study objectives, the study approach, the principal assumptions, the type of basic data generated and the significant results

NASA contributions to radial turbine aerodynamic analyses

A brief description of the radial turbine and its analysis needs is followed by discussions of five analytical areas; design geometry and performance, off design performance, blade row flow, scroll flow, and duct flow. The functions of the programs, areas of applicability, and limitations and uncertainties are emphasized. Both past contributions and current activities are discussed

Specific problems in cosmic ray research solvable through use of Pioneers 6-9 spacecrafts

A bibliography covering interplanetary cosmic ray flux measurements and the nature of both galactic and solar cosmic rays is presented. The data were taken by Pioneers 6 and 9

AUTOSIM: An automated repetitive software testing tool

AUTOSIM is a software tool which automates the repetitive run testing of software. This tool executes programming tasks previously performed by a programmer with one year of programming experience. Use of the AUTOSIM tool requires a knowledge base containing information about known faults, code fixes, and the fault diagnosis-correction process. AUTOSIM can be considered as an expert system which replaces a low level of programming expertise. Reference information about the design and implementation of the AUTOSIM software test tool provides flowcharts to assist in maintaining the software code and a description of how to use the tool

A compendium of sources of fracture toughness and fatigue crack growth data for metallic alloys, part 3

This Technical Memorandum presents sources of fracture toughness and fatigue crack growth data for metallic alloys. This is Part 3 of a three volume report

Solar magnetic field reversal as seen at Ulysses

The rapid motion of the Ulysses spacecraft from high southern to high northern latitudes in 2000–2001 provided an excellent opportunity to make inferences regarding the solar magnetic dipole's behaviour around solar maximum. A simple dipole model is fitted to Ulysses measurements of the polarity of the heliospheric magnetic field mapped back to the solar wind source surface. Although higher order components of the field are ignored, the gradual reversal in orientation of the dipole field component can be followed during solar maximum, with the dipole axis crossing the solar equator during early 2000–early 2001. The dipole appears to exhibit a rotation at a slower rate than the Carrington frame of reference, similar to previous measurements made around solar maximum in the solar equatorial regions

Preliminary flight tests of an oculometer

A remote sensing oculometer has been successfully operated during flight tests. This device was able to track the pilot's eye-point-of-regard (lookpoint) consistently and unobtrusively in the flight environment. The instantaneous position of the lookpoint was determined to within approximately 1 degree. Data were recorded on both analog and video tape. The video data consisted of continuous scenes of the aircraft's instrument display and a superimposed white dot (simulating the lookpoint) dwelling or moving from instrument to instrument as the pilot monitored the display information during landing approaches

Toxicity of the pyrolysis products of spacecraft materials

Data is presented which provides guides to (1) approximate temperature necessary to initiate thermodegradation of the polymeric materials tested, (2) the relative toxicity of thermodegradation products from the various materials, (3) the relative importance of carbon monoxide as the primary cause of death (as contrasted to cyanide or other toxic gases), and (4) whether or not the hazards of the fumes are confined to the time of exposure, or whether post-exposure death is likely. Two different experimental methods were employed

The solution of linear systems of equations with a structural analysis code on the NAS CRAY-2

Two methods for solving linear systems of equations on the NAS Cray-2 are described. One is a direct method; the other is an iterative method. Both methods exploit the architecture of the Cray-2, particularly the vectorization, and are aimed at structural analysis applications. To demonstrate and evaluate the methods, they were installed in a finite element structural analysis code denoted the Computational Structural Mechanics (CSM) Testbed. A description of the techniques used to integrate the two solvers into the Testbed is given. Storage schemes, memory requirements, operation counts, and reformatting procedures are discussed. Finally, results from the new methods are compared with results from the initial Testbed sparse Choleski equation solver for three structural analysis problems. The new direct solvers described achieve the highest computational rates of the methods compared. The new iterative methods are not able to achieve as high computation rates as the vectorized direct solvers but are best for well conditioned problems which require fewer iterations to converge to the solution

Development of a versatile laser light scattering instrument

A versatile laser light scattering (LLS) instrument is developed for use in microgravity to measure microscopic particles of 30 A to above 3 microns. Since it is an optical technique, LLS does not affect the sample being studied. A LLS instrument built from modules allows several configurations, each optimized for a particular experiment. The multiangle LLS instrument can be mounted in the rack in the Space Shuttle and on Space Station Freedom. It is possible that a Space Shuttle glove-box and a lap-top computer containing a correlator card can be used to perform a number of experiments and to demonstrate the technology needed for more elaborate investigations. This offers simple means of flying a great number of experiments without the additional requirements of full-scale flight hardware experiments