41 research outputs found
High Capacity CDMA and Collaborative Techniques
The thesis investigates new approaches to increase the user capacity and improve the error
performance of Code Division Multiple Access (CDMA) by employing adaptive interference cancellation
and collaborative spreading and space diversity techniques. Collaborative Coding Multiple
Access (CCMA) is also investigated as a separate technique and combined with CDMA. The
advantages and shortcomings of CDMA and CCMA are analysed and new techniques for both the
uplink and downlink are proposed and evaluated.
Multiple access interference (MAI) problem in the uplink of CDMA is investigated first. The
practical issues of multiuser detection (MUD) techniques are reviewed and a novel blind adaptive
approach to interference cancellation (IC) is proposed. It exploits the constant modulus (CM)
property of digital signals to blindly suppress interference during the despreading process and obtain
amplitude estimation with minimum mean squared error for use in cancellation stages. Two
new blind adaptive receiver designs employing successive and parallel interference cancellation
architectures using the CM algorithm (CMA) referred to as āCMA-SICā and āBA-PICā, respectively,
are presented. These techniques have shown to offer near single user performance for large
number of users. It is shown to increase the user capacity by approximately two fold compared
with conventional IC receivers. The spectral efficiency analysis of the techniques based on output
signal-to interference-and-noise ratio (SINR) also shows significant gain in data rate. Furthermore,
an effective and low complexity blind adaptive subcarrier combining (BASC) technique using a
simple gradient descent based algorithm is proposed for Multicarrier-CDMA. It suppresses MAI
without any knowledge of channel amplitudes and allows large number of users compared with
equal gain and maximum ratio combining techniques normally used in practice.
New user collaborative schemes are proposed and analysed theoretically and by simulations
in different channel conditions to achieve spatial diversity for uplink of CCMA and CDMA. First,
a simple transmitter diversity and its equivalent user collaborative diversity techniques for CCMA
are designed and analysed. Next, a new user collaborative scheme with successive interference
cancellation for uplink of CDMA referred to as collaborative SIC (C-SIC) is investigated to reduce
MAI and achieve improved diversity. To further improve the performance of C-SIC under high
system loading conditions, Collaborative Blind Adaptive SIC (C-BASIC) scheme is proposed.
It is shown to minimize the residual MAI, leading to improved user capacity and a more robust
system. It is known that collaborative diversity schemes incur loss in throughput due to the need of
orthogonal time/frequency slots for relaying sourceās data. To address this problem, finally a novel
near-unity-rate scheme also referred to as bandwidth efficient collaborative diversity (BECD) is proposed and evaluated for CDMA. Under this scheme, pairs of users share a single spreading sequence to exchange and forward their data employing a simple superposition or space-time
encoding methods. At the receiver collaborative joint detection is performed to separate each
paired usersā data. It is shown that the scheme can achieve full diversity gain at no extra bandwidth
as inter-user channel SNR becomes high.
A novel approach of āUser Collaborationā is introduced to increase the user capacity of CDMA
for both the downlink and uplink. First, collaborative group spreading technique for the downlink
of overloaded CDMA system is introduced. It allows the sharing of the same single spreading
sequence for more than one user belonging to the same group. This technique is referred to as
Collaborative Spreading CDMA downlink (CS-CDMA-DL). In this technique T-user collaborative
coding is used for each group to form a composite codeword signal of the users and then a
single orthogonal sequence is used for the group. At each userās receiver, decoding of composite
codeword is carried out to extract the userās own information while maintaining a high SINR performance.
To improve the bit error performance of CS-CDMA-DL in Rayleigh fading conditions,
Collaborative Space-time Spreading (C-STS) technique is proposed by combining the collaborative
coding multiple access and space-time coding principles. A new scheme for uplink of CDMA
using the āUser Collaborationā approach, referred to as CS-CDMA-UL is presented next. When
usersā channels are independent (uncorrelated), significantly higher user capacity can be achieved
by grouping multiple users to share the same spreading sequence and performing MUD on per
group basis followed by a low complexity ML decoding at the receiver. This approach has shown
to support much higher number of users than the available sequences while also maintaining the
low receiver complexity. For improved performance under highly correlated channel conditions,
T-user collaborative coding is also investigated within the CS-CDMA-UL system
Mobile and Wireless Communications
Mobile and Wireless Communications have been one of the major revolutions of the late twentieth century. We are witnessing a very fast growth in these technologies where mobile and wireless communications have become so ubiquitous in our society and indispensable for our daily lives. The relentless demand for higher data rates with better quality of services to comply with state-of-the art applications has revolutionized the wireless communication field and led to the emergence of new technologies such as Bluetooth, WiFi, Wimax, Ultra wideband, OFDMA. Moreover, the market tendency confirms that this revolution is not ready to stop in the foreseen future. Mobile and wireless communications applications cover diverse areas including entertainment, industrialist, biomedical, medicine, safety and security, and others, which definitely are improving our daily life. Wireless communication network is a multidisciplinary field addressing different aspects raging from theoretical analysis, system architecture design, and hardware and software implementations. While different new applications are requiring higher data rates and better quality of service and prolonging the mobile battery life, new development and advanced research studies and systems and circuits designs are necessary to keep pace with the market requirements. This book covers the most advanced research and development topics in mobile and wireless communication networks. It is divided into two parts with a total of thirty-four stand-alone chapters covering various areas of wireless communications of special topics including: physical layer and network layer, access methods and scheduling, techniques and technologies, antenna and amplifier design, integrated circuit design, applications and systems. These chapters present advanced novel and cutting-edge results and development related to wireless communication offering the readers the opportunity to enrich their knowledge in specific topics as well as to explore the whole field of rapidly emerging mobile and wireless networks. We hope that this book will be useful for students, researchers and practitioners in their research studies
Blind source separation for interference cancellation in CDMA systems
Communication is the science of "reliable" transfer of information between two parties, in the sense that the information reaches the intended party with as few errors as possible. Modern wireless systems have many interfering sources that hinder reliable communication. The performance of receivers severely deteriorates in the presence of unknown or unaccounted interference. The goal of a receiver is then to combat these sources of interference in a robust manner while trying to optimize the trade-off between gain and computational complexity.
Conventional methods mitigate these sources of interference by taking into account all available information and at times seeking additional information e.g., channel characteristics, direction of arrival, etc. This usually costs bandwidth. This thesis examines the issue of developing mitigating algorithms that utilize as little as possible or no prior information about the nature of the interference. These methods are either semi-blind, in the former case, or blind in the latter case.
Blind source separation (BSS) involves solving a source separation problem with very little prior information. A popular framework for solving the BSS problem is independent component analysis (ICA). This thesis combines techniques of ICA with conventional signal detection to cancel out unaccounted sources of interference. Combining an ICA element to standard techniques enables a robust and computationally efficient structure. This thesis proposes switching techniques based on BSS/ICA effectively to combat interference. Additionally, a structure based on a generalized framework termed as denoising source separation (DSS) is presented. In cases where more information is known about the nature of interference, it is natural to incorporate this knowledge in the separation process, so finally this thesis looks at the issue of using some prior knowledge in these techniques. In the simple case, the advantage of using priors should at least lead to faster algorithms.reviewe
An Optimization Theoretical Framework for Resource Allocation over Wireless Networks
With the advancement of wireless technologies, wireless networking has become ubiquitous owing to the great demand of pervasive mobile applications. Some fundamental challenges exist for the next generation wireless network design such as time varying nature of wireless channels, co-channel interferences, provisioning of heterogeneous type of services, etc. So how to overcome these difficulties and improve the system performance have become an important research topic.
Dynamic resource allocation is a general strategy to control the interferences and enhance the performance of wireless networks. The basic idea behind dynamic resource allocation is to utilize the channel more efficiently by sharing the spectrum and reducing
interference through optimizing parameters such as the
transmitting power, symbol transmission rate, modulation scheme, coding scheme, bandwidth, etc. Moreover, the network performance can be further improved by introducing diversity, such as
multiuser, time, frequency, and space diversity. In addition, cross layer approach for resource allocation can provide advantages such as low overhead, more efficiency, and direct end-to-end QoS provision.
The designers for next generation wireless networks face the common problem of how to optimize the system objective under the user Quality of Service (QoS) constraint. There is a need of unified but general optimization framework for resource allocation
to allow taking into account a diverse set of objective functions with various QoS requirements, while considering all kinds of diversity and cross layer approach. We propose an optimization
theoretical framework for resource allocation and apply these ideas to different network situations such as:
1.Centralized resource allocation with fairness constraint
2.Distributed resource allocation using game theory
3.OFDMA resource allocation
4.Cross layer approach
On the whole, we develop a universal view of the whole wireless networks from multiple dimensions: time, frequency, space, user, and layers. We develop some schemes to fully utilize the resources. The success of the proposed research will significantly
improve the way how to design and analyze resource allocation over wireless networks. In addition, the cross-layer optimization nature of the problem provides an innovative insight into vertical
integration of wireless networks
Recommended from our members
Interference cancellation for shot-code DS-CDMA in the presence of channel fading
Interference from other adjacent users in wireless applications is a major problem
in direct-sequence code-division multiple-access (DS-CDMA). This is also known as the
near-far problem where a strong signal from one user interferes with other users. The
current approach to deal with the near-far problem in DS-CDMA systems is to use strict
transmitter power control. An alternative approach is to use near-far resistant receivers.
The practical near-far resistance receiver structure is the adaptive decorrelating detectors
since it avoids complex matrix inversion.
The existing CDMA standard known as IS-95 uses a long signature code
sequence. However for simplicity, the adaptive multi-user receiver uses short signature
code sequence. The problem is that adaptive receivers lose near-far resistance as the
number of users increases in the system. This thesis describes a novel method of multistage
decision feedback cancellation (DFC) scheme immune from the near-far problem.
The performance of the new DFC structure is constructed using three different adaptive
algorithms: the least mean squared (LMS), the recursive least squared (RLS) and the
linearly constraint constant modulus (LCCM) adaptive algorithms. It is found that LMS
adaptive algorithm provides the best result considering its simple hardware complexity.
It is also found that the LMS adaptive receiver along with the DFC structure provides a
better bit synchronization capability to the over all system. Since the receiver is near-far
resistant, the LMS adaptive receiver along with the decision feedback cancellation
structure also performs better in the presence of Rayleigh fading
DoA and ToA Estimation, Device Positioning and Network Synchronization in 5G New Radio : Algorithms and Performance Analysis
Location information plays a signiļ¬cant role not only in our everyday life through various location-based services, but also in emerging technologies such as virtual reality, robotics, and autonomous driving. In contrast to the existing and earlier cellular generations, positioning has been considered as a key element in future cellular networks from the very beginning of the ļ¬fth generation (5G) standardization process. Even though the earlier generations are capably of providing coarse location estimates, the achieved accuracy is far from the expected even sub-meter positioning accuracy envisioned in the context of 5G networks. In general, 5G new radio (NR) networks provide a convenient infrastructure for positioning by means of wider bandwidths, larger antenna arrays, and even more densely deployed networks especially at high millimeter wave (mmWave) frequencies. Building on dense 5G NR networks, this thesis focuses on the development of novel network-centric positioning frameworks by exploiting the existing NR reference signals. The contributions in this thesis can be grouped into topics based on the considered frequency ranges and the employed beamforming (BF) schemes therein.
First, novel cascaded algorithms for sequential device positioning are proposed assuming 5G NR networks operating at the lower sub-6 GHz frequency range and equipped with digital BF capabilities. In the ļ¬rst stage of the cascaded solution, two sequential estimators are proposed for joint direction of arrival (DoA) and time of arrival (ToA) estimation facilitating the received reference signals. Thereafter, the second-stage sequential estimators employing the obtained DoA and ToA estimates are proposed for joint positioning and network synchronization resulting in not only device location estimates, but also clock parameter estimates that are obtained as a valuable by-product. Such a choice stems from the fact that the ToA estimates are not feasible for positioning as such due to the clock instabilities in low-cost devices and the insufficient level of synchronization in the cellular networks. Second, a similar cascaded algorithm for joint positioning and network synchronization is proposed in the context of dense mmWave 5G networks and fundamentally diļ¬erent analog BFs. In particular, a novel joint DoA and ToA estimator is proposed by fusing information from multiple received beams based on a novel beam-selection method. In addition, the theoretical performance limits are derived and compared to those obtained using the digital BFs. The cascaded framework is completed with the second-stage positioning solution in a similar manner as in the case of digital BFs.
The performance of both frameworks is evaluated and analyzed in various scenarios using extensive computer simulations relying on the latest 5G NR numerology and a ray-tracing tool. Overall, this thesis provides valuable insights into practical positioning algorithms and their performance when relying solely on the 5G NR networks and available signalling therein. The obtained results in this thesis indicate that the envisioned sub-meter positioning accuracy is technically feasible using NR-based solutions