Rate Splitting for MIMO Wireless Networks: A Promising PHY-Layer Strategy for LTE Evolution

MIMO processing plays a central part towards the recent increase in spectral and energy efficiencies of wireless networks. MIMO has grown beyond the original point-to-point channel and nowadays refers to a diverse range of centralized and distributed deployments. The fundamental bottleneck towards enormous spectral and energy efficiency benefits in multiuser MIMO networks lies in a huge demand for accurate channel state information at the transmitter (CSIT). This has become increasingly difficult to satisfy due to the increasing number of antennas and access points in next generation wireless networks relying on dense heterogeneous networks and transmitters equipped with a large number of antennas. CSIT inaccuracy results in a multi-user interference problem that is the primary bottleneck of MIMO wireless networks. Looking backward, the problem has been to strive to apply techniques designed for perfect CSIT to scenarios with imperfect CSIT. In this paper, we depart from this conventional approach and introduce the readers to a promising strategy based on rate-splitting. Rate-splitting relies on the transmission of common and private messages and is shown to provide significant benefits in terms of spectral and energy efficiencies, reliability and CSI feedback overhead reduction over conventional strategies used in LTE-A and exclusively relying on private message transmissions. Open problems, impact on standard specifications and operational challenges are also discussed.Comment: accepted to IEEE Communication Magazine, special issue on LTE Evolutio

Sparse Signal Processing Concepts for Efficient 5G System Design

As it becomes increasingly apparent that 4G will not be able to meet the emerging demands of future mobile communication systems, the question what could make up a 5G system, what are the crucial challenges and what are the key drivers is part of intensive, ongoing discussions. Partly due to the advent of compressive sensing, methods that can optimally exploit sparsity in signals have received tremendous attention in recent years. In this paper we will describe a variety of scenarios in which signal sparsity arises naturally in 5G wireless systems. Signal sparsity and the associated rich collection of tools and algorithms will thus be a viable source for innovation in 5G wireless system design. We will discribe applications of this sparse signal processing paradigm in MIMO random access, cloud radio access networks, compressive channel-source network coding, and embedded security. We will also emphasize important open problem that may arise in 5G system design, for which sparsity will potentially play a key role in their solution.Comment: 18 pages, 5 figures, accepted for publication in IEEE Acces

Optimize Power Allocation Scheme to Maximize Sum Rate in CoMP with Limited Channel State Information

Extensive use of mobile applications throws many challenges in cellular systems like cell edge throughput, inter cell interference and spectral e�ciency. Many of these challenges have been resolved using Coordinated Multi-Point (CoMP), developed in the Third Generation Partnership Project for LTE-Advanced) to a great extent. CoMP cooperatively process signals from base sta- tions that are connected to various multiple terminals (user equipment (UEs)) at transmission and reception. This CoMP improves throughput, reduces or even removes inter-cell interference and increases spectral e�ciency in the downlink of multi-antenna coordinated multipoint systems. Many researchers addressed these issues assuming that BSs have the knowledge of the common control channels dedicated to all UEs and also about the full or partial channel state information (CSI) of all the links. From the CSI available at the BSs, multiuser interference can be managed at the BSs. To make this feasible, UEs are responsible for collecting downlink CSI. But, CSI measurement (instantaneous and/or statistical) is imperfect in nature because of the randomly varying nature of the channels at random times. These incorrect CSI values available at the BSs may, in turn, create multi-user interference. There are many techniques to suppress the multi-user interference, among which the feedback scheme is the one which is gaining a lot of attention. In feedback schemes, CSI information needs to be fed back to the base station from UEs in the uplink. It is obvious, the question arises on the type and amount of feedback need to be used. Research has been progressing in this front and some feedback techniques have been proposed. Three basic CoMP Feedback schemes are available. Explicit or statistical channel information feedback scheme in which channel information like channels's covariance matrix of the channel are shared between the transmitter and receiver. Next, implicit or statistical channel information feedback which contains information such as Channel quality indication or Precoding matrix indicator or Rank indicator. 1st applied to TDD LTE type structure and 2nd of feedback scheme can be applied in the FDD system. Finally, we have UE which tranmit the sounding reference signal (CSI). This type of feedback scheme is applied to exploit channel reciprocity and to reduce channel intercell interference and this can be applied in the TDD system. We have analyzed the scenario of LTE TDD based system. After this, optimization of power is also required because users at the cell edge required more attention than the user locating at the center of the cell. In my work, it shows estimated power gives exponential divercity for high SNR as low SNR too. In this method, a compression feedback method is analyzed to provide multi-cell spatial channel information. It improves the feedback e�ciency and throughput. The rows and columns of the channel matrix are compressed using Eigenmode of the user and codebook based scheme speci�ed in LTE speci�cation. The main drawback of this scheme is that spectral e�ciency is achieved with the cost of increased overheads for feedback and evolved NodeB (eNB). Other factor is complexity of eNodeB which is to be addressed in future work

Symbol-Level Multiuser MISO Precoding for Multi-level Adaptive Modulation

Symbol-level precoding is a new paradigm for multiuser downlink systems which aims at creating constructive interference among the transmitted data streams. This can be enabled by designing the precoded signal of the multiantenna transmitter on a symbol level, taking into account both channel state information and data symbols. Previous literature has studied this paradigm for MPSK modulations by addressing various performance metrics, such as power minimization and maximization of the minimum rate. In this paper, we extend this to generic multi-level modulations i.e. MQAM and APSK by establishing connection to PHY layer multicasting with phase constraints. Furthermore, we address adaptive modulation schemes which are crucial in enabling the throughput scaling of symbol-level precoded systems. In this direction, we design signal processing algorithms for minimizing the required power under per-user SINR or goodput constraints. Extensive numerical results show that the proposed algorithm provides considerable power and energy efficiency gains, while adapting the employed modulation scheme to match the requested data rate

A Survey of Physical Layer Security Techniques for 5G Wireless Networks and Challenges Ahead

Physical layer security which safeguards data confidentiality based on the information-theoretic approaches has received significant research interest recently. The key idea behind physical layer security is to utilize the intrinsic randomness of the transmission channel to guarantee the security in physical layer. The evolution towards 5G wireless communications poses new challenges for physical layer security research. This paper provides a latest survey of the physical layer security research on various promising 5G technologies, including physical layer security coding, massive multiple-input multiple-output, millimeter wave communications, heterogeneous networks, non-orthogonal multiple access, full duplex technology, etc. Technical challenges which remain unresolved at the time of writing are summarized and the future trends of physical layer security in 5G and beyond are discussed.Comment: To appear in IEEE Journal on Selected Areas in Communication

A limited feedback scheme based on spatially correlated channels for coordinated multipoint systems

High spectral efficiency can be achieved in the downlink of multi-antenna coordinated multi-point systems provided that the multiuser interference is appropriately managed at the transmitter side. For this sake, downlink channel information needs to be sent back by the users, thus reducing the rate available at the uplink channel. The amount and type of feedback information required has been extensively studied and many limited feedback schemes have been proposed lately. A common pattern to all of them is that achieving low rates of feedback information is possible at the cost of increasing complexity at the user side and, sometimes, assuming that some statistics of the channel are known. In this article, we propose a simple and versatile limited feedback scheme that exploits the spatial correlation at each multi-antenna base station (BS) without requiring any previous statistical information of the channel and without adding significant computational complexity. It is based on the separate quantization of the channel impulse response modulus and phase and it shows better mean square error performance than the standard scheme based on quantization of real and imaginary parts. In order to evaluate the performance of the downlink regarding multiuser interference management, different precoding techniques at the BSs, such as zero-forcing (ZF), Tomlinson-Harashima precoding (THP) and lattice reduction Tomlinson- Harashima precoding (LRTHP), have been evaluated. Simulations results show that LRTHP and THP present a higher robustness than ZF precoding against channel quantization errors but at the cost of a higher complexity at the BS. Regarding sum-capacity and bit error rate performances, our versatile scheme achieves better results than the standard one in the medium and high SNR regime, that is, in the region where quantization errors are dominant against noise, for the same feedback cost measured in bits per user