Multiprocessor fixed priority scheduling with limited preemptions

Challenges associated with allowing preemptions and migrations are compounded in multicore systems, particularly under global scheduling policies, because of the potentially high overheads. For example, multiple levels of cache greatly increase preemption and migration related overheads as well as the difficulty involved in accurately accounting for them, leading to substantially inflated worst-case execution times (WCETs). Preemption and migration related overheads can be significantly reduced, both in number and in size, by using fixed preemption points in the tasks' code; thus dividing each task into a series of non-preemptive regions (NPRs). This leads to an additional consideration in the scheduling policy. When a high priority task is released and all of the processors are executing non-preemptive regions of lower priority tasks, then there is a choice to be made in terms of how to manage the next preemption. With an eager approach the first lower priority task to reach a preemption point is preempted even if it is not the lowest priority running task. Alternatively, with a lazy approach, preemption is delayed until the lowest priority currently running task reaches its next preemption point. In this paper, we show that under global fixed priority scheduling with eager preemptions each task suffers from at most a single priority inversion each time it resumes execution. Building on this observation, we derive a new response time based schedulability test for tasks with fixed preemption points. Experimental evaluations show that global fixed priority scheduling with eager preemptions is significantly more effective than with lazy preemption using link based scheduling in terms of task set schedulability

Integrating Job Parallelism in Real-Time Scheduling Theory

We investigate the global scheduling of sporadic, implicit deadline, real-time task systems on multiprocessor platforms. We provide a task model which integrates job parallelism. We prove that the time-complexity of the feasibility problem of these systems is linear relatively to the number of (sporadic) tasks for a fixed number of processors. We propose a scheduling algorithm theoretically optimal (i.e., preemptions and migrations neglected). Moreover, we provide an exact feasibility utilization bound. Lastly, we propose a technique to limit the number of migrations and preemptions

Gang FTP scheduling of periodic and parallel rigid real-time tasks

In this paper we consider the scheduling of periodic and parallel rigid tasks. We provide (and prove correct) an exact schedulability test for Fixed Task Priority (FTP) Gang scheduler sub-classes: Parallelism Monotonic, Idling, Limited Gang, and Limited Slack Reclaiming. Additionally, we study the predictability of our schedulers: we show that Gang FJP schedulers are not predictable and we identify several sub-classes which are actually predictable. Moreover, we extend the definition of rigid, moldable and malleable jobs to recurrent tasks

An Analysis of Lazy and Eager Limited Preemption Approaches under DAG-Based Global Fixed Priority Scheduling

DAG-based scheduling models have been shown to effectively express the parallel execution of current many-core heterogeneous architectures. However, their applicability to real-time settings is limited by the difficulties to find tight estimations of the worst-case timing parameters of tasks that may arbitrarily be preempted/migrated at any instruction. An efficient approach to increase the system predictability is to limit task preemptions to a set of pre-defined points. This limited preemption model supports two different preemption approaches, eager and lazy, which have been analyzed only for sequential task-sets. This paper proposes a new response time analysis that computes an upper bound on the lower priority blocking that each task may incur with eager and lazy preemptions. We evaluate our analysis with both, synthetic DAG-based task-sets and a real case-study from the automotive domain. Results from the analysis demonstrate that, despite the eager approach generates a higher number of priority inversions, the blocking impact is generally smaller than in the lazy approach, leading to a better schedulability performance.This work was funded by the EU projects P-SOCRATES (FP7-ICT-2013-10) and HERCULES (H2020/ICT/2015/688860), and the Spanish Ministry of Science and Innovation under contract TIN2015-65316-P.Peer ReviewedPostprint (author's final draft

Improved CRPD analysis and a secure scheduler against information leakage in real-time systems

Real-time systems are widely applied to the time-critical fields. In order to guarantee that all tasks can be completed on time, predictability becomes a necessary factor when designing a real-time system. Due to more and more requirements about the performance in the real-time embedded system, the cache memory is introduced to the real-time embedded systems. However, the cache behavior is difficult to predict since the data will be loaded either on the cache or the memory. In order to taking the unexpected overhead, execution time are often enlarged by a certain (huge) factor. However, this will cause a waste of computation resource. Hence, in this thesis, we first integrate the cache-related preemption delay to the previous global earliest deadline first schedulability analysis in the direct-mapped cache. Moreover, several analyses for tighter G-EDF schedulability tests are conducted based on the refined estimation of the maximal number of preemptions. The experimental study is conducted to demonstrate the performance of the proposed methods. Furthermore, Under the classic scheduling mechanisms, the execution patterns of tasks on such a system can be easily derived. Therefore, in the second part of the thesis, a novel scheduler, roulette wheel scheduler (RWS), is proposed to randomize the task execution pattern. Unlike traditional schedulers, RWS assigns probabilities to each task at predefined scheduling points, and the choice for execution is randomized, such that the execution pattern is no longer fixed. We apply the concept of schedule entropy to measure the amount of uncertainty introduced by any randomized scheduler, which reflects the unlikelihood of for such attacks to success. Comparing to existing randomized scheduler that gives all eligible tasks equal likelihood at a given time point, the proposed method adjusted such values so that the entropy can be greatly increased --Abstract, page iii

Control techniques for thermal-aware energy-efficient real time multiprocessor scheduling

La utilización de microprocesadores multinúcleo no sólo es atractiva para la industria sino que en muchos ámbitos es la única opción. La planificación tiempo real sobre estas plataformas es mucho más compleja que sobre monoprocesadores y en general empeoran el problema de sobre-diseño, llevando a la utilización de muchos más procesadores /núcleos de los necesarios. Se han propuesto algoritmos basados en planificación fluida que optimizan la utilización de los procesadores, pero hasta el momento presentan en general inconvenientes que los alejan de su aplicación práctica, no siendo el menor el elevado número de cambios de contexto y migraciones.Esta tesis parte de la hipótesis de que es posible diseñar algoritmos basados en planificación fluida, que optimizan la utilización de los procesadores, cumpliendo restricciones temporales, térmicas y energéticas, con un bajo número de cambios de contexto y migraciones, y compatibles tanto con la generación fuera de línea de ejecutivos cíclicos atractivos para la industria, como de planificadores que integran técnicas de control en tiempo de ejecución que permiten la gestión eficiente tanto de tareas aperiódicas como de desviaciones paramétricas o pequeñas perturbaciones.A este respecto, esta tesis contribuye con varias soluciones. En primer lugar, mejora una metodología de modelo que representa todas las dimensiones del problema bajo un único formalismo (Redes de Petri Continuas Temporizadas). En segundo lugar, propone un método de generación de un ejecutivo cíclico, calculado en ciclos de procesador, para un conjunto de tareas tiempo real duro sobre multiprocesadores que optimiza la utilización de los núcleos de procesamiento respetando también restricciones térmicas y de energía, sobre la base de una planificación fluida. Considerar la sobrecarga derivada del número de cambios de contexto y migraciones en un ejecutivo cíclico plantea un dilema de causalidad: el número de cambios de contexto (y en consecuencia su sobrecarga) no se conoce hasta generar el ejecutivo cíclico, pero dicho número no se puede minimizar hasta que se ha calculado. La tesis propone una solución a este dilema mediante un método iterativo de convergencia demostrada que logra minimizar la sobrecarga mencionada.En definitiva, la tesis consigue explotar la idea de planificación fluida para maximizar la utilización (donde maximizar la utilización es un gran problema en la industria) generando un sencillo ejecutivo cíclico de mínima sobrecarga (ya que la sobrecarga implica un gran problema de los planificadores basados en planificación fluida).Finalmente, se propone un método para utilizar las referencias de la planificación fuera de línea establecida en el ejecutivo cíclico para su seguimiento por parte de un controlador de frecuencia en línea, de modo que se pueden afrontar pequeñas perturbaciones y variaciones paramétricas, integrando la gestión de tareas aperiódicas (tiempo real blando) mientras se asegura la integridad de la ejecución del conjunto de tiempo real duro.Estas aportaciones constituyen una novedad en el campo, refrendada por las publicaciones derivadas de este trabajo de tesis.<br /

Reinforcement learning based multi core scheduling (RLBMCS) for real time systems

Embedded systems with multi core processors are increasingly popular because of the diversity of applications that can be run on it. In this work, a reinforcement learning based scheduling method is proposed to handle the real time tasks in multi core systems with effective CPU usage and lower response time. The priority of the tasks is varied dynamically to ensure fairness with reinforcement learning based priority assignment and Multi Core MultiLevel Feedback queue (MCMLFQ) to manage the task execution in multi core system

Escalonar sistemas de tempo-real de alta críticalidade

Cyclic executives are used to schedule safety-critical real-time systems because of their determinism, simplicity, and efficiency. One major challenge of the cyclic executive model is to produce the cyclic scheduling timetable. This problem is related to the bin-packing problem [34] and is NP-Hard in the strong sense. Unnecessary context switches within the scheduling table can introduce significant overhead; in IMA (Integrated Modular Avionics), cache-related overheads can increase task execution times up to 33% [18]. Developed in the context of the Software Engineering Master’s Degree at ISEP, the Polytechnic Institute of Engineering in Porto Portugal, this thesis contains two contributions to the scheduling literature. The first is a precise and exact approach to computing the slack of a job set that is schedule policy independent. The method introduces several operations to update and maintain the slack at runtime, ensuring the slack of all jobs is valid and coherent. The second contribution is the definition of a state-of-the-art preemptive scheduling algorithm focused on minimizing the number of system preemptions for real-time safety-critical applications within a reasonable amount of time. Both contributions have been implemented and extensively tested in scala. Experimental results suggest our scheduling algorithm has similar non-preemptive schedulability ratio than Chain Window RM [69], yet lower ratio in high utilizations than Chain Window EDF [69] and BB-Moore [68]. For ask sets that failed to be scheduled non-preemptively, 98-99% of all jobs are scheduled without preemptions. Considering the fact that our scheduler is preemptive, being able to compete with non-preemptive schedulers is an excellent result indeed. In terms of execution time, our proposal is multiple orders of magnitude faster than the aforementioned algorithms. Both contributions of this work are planned to be presented at future conferences such as RTSS@Work and RTAS

Task Scheduling for Multiprocessor Systems Using Queuing Theory

This research focuses on comparing different multi-processor task scheduling algorithms. Each algorithm has been simulated using one of queuing theory models in Operations Research (OR) science to evaluate its behavior and efficiency. The comparison includes an analysis of the behavior of central processing unit (CPU) when receiving number of jobs at four random job duration patterns that are; (random, ascending, descending, and volatile low-high). Microsoft Excel 2010 was used to form the data of each case, and the result shows convergence and divergence among the studied algorithms at different patterns. Also it has been found that the Fleischer algorithm is very efficient in enhancing and minimizing the waiting duration for each job at the total job queue of the CPU. Keywords: Operations Research, Queuing Theory, Multiprocessor, Scheduling Algorithms, Simulation