7 research outputs found

    Low-Complexity Multicarrier Waveform Processing Schemes fo Future Wireless Communications

    Get PDF
    Wireless communication systems deliver enormous variety of services and applications. Nowa- days, wireless communications play a key-role in many fields, such as industry, social life, education, and home automation. The growing demand for wireless services and applications has motivated the development of the next generation cellular radio access technology called fifth-generation new radio (5G-NR). The future networks are required to magnify the delivered user data rates to gigabits per second, reduce the communication latency below 1 ms, and en- able communications for massive number of simple devices. Those main features of the future networks come with new demands for the wireless communication systems, such as enhancing the efficiency of the radio spectrum use at below 6 GHz frequency bands, while supporting various services with quite different requirements for the waveform related key parameters. The current wireless systems lack the capabilities to handle those requirements. For exam- ple, the long-term evolution (LTE) employs the cyclic-prefix orthogonal frequency-division multiplexing (CP-OFDM) waveform, which has critical drawbacks in the 5G-NR context. The basic drawback of CP-OFDM waveform is the lack of spectral localization. Therefore, spectrally enhanced variants of CP-OFDM or other multicarrier waveforms with well localized spectrum should be considered. This thesis investigates spectrally enhanced CP-OFDM (E-OFDM) schemes to suppress the out-of-band (OOB) emissions, which are normally produced by CP-OFDM. Commonly, the weighted overlap-and-add (WOLA) scheme applies smooth time-domain window on the CP- OFDM waveform, providing spectrally enhanced subcarriers and reducing the OOB emissions with very low additional computational complexity. Nevertheless, the suppression perfor- mance of WOLA-OFDM is not sufficient near the active subband. Another technique is based on filtering the CP-OFDM waveform, which is referred to as F-OFDM. F-OFDM is able to provide well-localized spectrum, however, with significant increase in the computational com- plexity in the basic scheme with time-domain filters. Also filter-bank multicarrier (FBMC) waveforms are included in this study. FBMC has been widely studied as a potential post- OFDM scheme with nearly ideal subcarrier spectrum localization. However, this scheme has quite high computational complexity while being limited to uniformly distributed sub- bands. Anyway, filter-bank based waveform processing is one of the main topics of this work. Instead of traditional polyphase network (PPN) based uniform filter banks, the focus is on fast-convolution filter banks (FC-FBs), which utilize fast Fourier transform (FFT) domain processing to realize effectively filter-banks with high flexibility in terms of subcarrier bandwidths and center frequencies. FC-FBs are applied for both FBMC and F-OFDM waveform genera- tion and processing with greatly increased flexibility and significantly reduced computational complexity. This study proposes novel structures for FC-FB processing based on decomposition of the FC-FB structure consisting of forward and inverse discrete Fourier transforms (DFT and IDFT). The decomposition of multirate FC provides means of reducing the computational complexity in some important specific scenarios. A generic FC decomposition model is proposed and analyzed. This scheme is mathematically equivalent to the corresponding direct FC imple- mentation, with exactly the same performance. The benefits of the optimized decomposition structure appear mainly in communication scenarios with relatively narrow active transmis- sion band, resulting in significantly reduced computational complexity compared to the direct FC structure. The narrowband scenarios find their places in the recent 3GPP specification of cellular low- power wide-area (LPWA) access technology called narrowband internet-of-things (NB-IoT). NB-IoT aims at introducing the IoT to LTE and GSM frequency bands in coexistence with those technologies. NB-IoT uses CP-OFDM based waveforms with parameters compatible with the LTE. However, additional means are needed also for NB-IoT transmitters to improve the spec- trum localization. For NB-IoT user devices, it is important to consider ultra-low complexity solutions, and a look-up table (LUT) based approach is proposed to implement NB-IoT uplink transmitters with filtered waveforms. This approach provides completely multiplication-free digital baseband implementations and the addition rates are similar or smaller than in the basic NB-IoT waveform generation without the needed elements for spectrum enhancement. The basic idea includes storing full or partial waveforms for all possible data symbol combinations. Then the transmitted waveform is composed through summation of needed stored partial waveforms and trivial phase rotations. The LUT based scheme is developed with different vari- ants tackling practical implementations issues of NB-IoT device transmitters, considering also the effects of nonlinear power amplifier. Moreover, a completely multiplication and addition- free LUT variant is proposed and found to be feasible for very narrowband transmission, with up to 3 subcarriers. The finite-wordlength performance of LUT variants is evaluated through simulations

    Investigations on Filtered OFDM with Selective Mapping Method and Partial Transmit Sequence Technique for Future Generation Mobile Communication Systems

    Get PDF
    Future generation mobile communication system requires asynchronous transmission of data, reduced out-of-band power emission, low peak-to-average power ratio, low latency, high data transmission rate, better spectrum, energy, and power efficiency, etc. Investigations on suitable waveform candidates for future-generation mobile communication have been reported in this paper. Filtered Orthogonal Frequency Division Multiplexing (F- OFDM), F- OFDM with Selective Mapping Method (SLM), and F- OFDM with Partial Transmit Sequence (PTS) technique, have been investigated. Its performances have been evaluated in terms of peak-to-average power ratio (PAPR), bit error rate (BER), and out-of-band power emissions. F–OFDM is a suitable candidate for future-generation mobile communication systems that can be used with single-rate or multirate filters. It can also be used in combination with other PAPR reduction techniques. F-OFDM with PTS technique requires a smaller number of IFFT operations than F-OFDM with SLM. The result obtained from my present investigations reveals that F-OFDM with the PTS technique has 4.3 dB less PAPR than that of OFDM at the cost of marginal increase in the BER value

    Novel evaluation framework for sensing spread spectrum in cognitive radio

    Get PDF
    The cognitive radio network is designed to cater to the optimization demands of restricted spectrum availability. A review of existing literature on spectrum sensing shows that there is still a broader scope for its improvement. Therefore, this paper introduces an efficient computational framework capable of evaluating the effectiveness of the spread spectrum concept in the context of cognitive radio network in a more scalable and granular way. The proposed method introduces a dual hypothesis using a different set of dependable parameters to emphasize the detection of optimal energy for a low signal quality state over the noise. The proposed evaluation framework is benchmarked using a statistical analysis method not present in any existing approaches toward spread spectrum sensing. The simulated outcome of the study exhibits that the proposed system offers a significantly better probability of detection than the current system using a simplified evaluation scheme with multiple test parameters

    Filtered Multicarrier Transmission

    Get PDF
    Orthogonal frequency‐division multiplexing (OFDM) has been adopted as the waveform of choice in the existing and emerging broadband wireless communication systems for a number of advantages it can offer. Nevertheless, investigations of more advanced multicarrier transmission schemes have continued with the aim of eliminating or mitigating its essential limitations. This article discusses multicarrier schemes with enhanced spectrum localization, which manage to reduce the spectral sidelobes of plain OFDM that are problematic in various advanced communication scenarios. These include schemes for enhancing the OFDM waveform characteristics through additional signal processing as well as filter‐bank multicarrier (FBMC) waveforms utilizing frequency‐selective filter banks instead of plain (inverse) discrete Fourier transform processing for waveform generation and demodulation.acceptedVersionPeer reviewe

    Design and Realization of Fully-digital Microwave and Mm-wave Multi-beam Arrays with FPGA/RF-SOC Signal Processing

    Get PDF
    There has been a constant increase in data-traffic and device-connections in mobile wireless communications, which led the fifth generation (5G) implementations to exploit mm-wave bands at 24/28 GHz. The next-generation wireless access point (6G and beyond) will need to adopt large-scale transceiver arrays with a combination of multi-input-multi-output (MIMO) theory and fully digital multi-beam beamforming. The resulting high gain array factors will overcome the high path losses at mm-wave bands, and the simultaneous multi-beams will exploit the multi-directional channels due to multi-path effects and improve the signal-to-noise ratio. Such access points will be based on electronic systems which heavily depend on the integration of RF electronics with digital signal processing performed in Field programmable gate arrays (FPGA)/ RF-system-on-chip (SoC). This dissertation is directed towards the investigation and realization of fully-digital phased arrays that can produce wideband simultaneous multi-beams with FPGA or RF-SoC digital back-ends. The first proposed approach is a spatial bandpass (SBP) IIR filter-based beamformer, and is based on the concepts of space-time network resonance. A 2.4 GHz, 16-element array receiver, has been built for real-time experimental verification of this approach. The second and third approaches are respectively based on Discrete Fourier Transform (DFT) theory, and a lens plus focal planar array theory. Lens based approach is essentially an analog model of DFT. These two approaches are verified for a 28 GHz 800 MHz mm-wave implementation with RF-SoC as the digital back-end. It has been shown that for all proposed multibeam beamformer implementations, the measured beams are well aligned with those of the simulated. The proposed approaches differ in terms of their architectures, hardware complexity and costs, which will be discussed as this dissertation opens up. This dissertation also presents an application of multi-beam approaches for RF directional sensing applications to explore white spaces within the spatio-temporal spectral regions. A real-time directional sensing system is proposed to capture the white spaces within the 2.4 GHz Wi-Fi band. Further, this dissertation investigates the effect of electro-magnetic (EM) mutual coupling in antenna arrays on the real-time performance of fully-digital transceivers. Different algorithms are proposed to uncouple the mutual coupling in digital domain. The first one is based on finding the MC transfer function from the measured S-parameters of the antenna array and employing it in a Frost FIR filter in the beamforming backend. The second proposed method uses fast algorithms to realize the inverse of mutual coupling matrix via tridiagonal Toeplitz matrices having sparse factors. A 5.8 GHz 32-element array and 1-7 GHz 7-element tightly coupled dipole array (TCDA) have been employed to demonstrate the proof-of-concept of these algorithms

    Wavelet Theory

    Get PDF
    The wavelet is a powerful mathematical tool that plays an important role in science and technology. This book looks at some of the most creative and popular applications of wavelets including biomedical signal processing, image processing, communication signal processing, Internet of Things (IoT), acoustical signal processing, financial market data analysis, energy and power management, and COVID-19 pandemic measurements and calculations. The editor’s personal interest is the application of wavelet transform to identify time domain changes on signals and corresponding frequency components and in improving power amplifier behavior
    corecore