Design of Network Coding Schemes and RF Energy Transfer in Wireless Communication Networks

This thesis focuses on the design of network coding schemes and radio frequency (RF) energy transfer in wireless communication networks. During the past few years, network coding has attracted significant attention because of its capability to transmit maximum possible information in a network from multiple sources to multiple destinations via a relay. Normally, the destinations are only able to decode the information with sufficient prior knowledge. To enable the destinations to decode the information in the cases with less/no prior knowledge, a pattern of nested codes with multiple interpretations using binary convolutional codes is constructed in a multi-source multi-destination wireless relay network. Then, I reconstruct nested codes with convolutional codes and lattice codes in multi-way relay channels to improve the spectrum efficiency. Moreover, to reduce the high decoding complexity caused by the adopted convolutional codes, a network coded non-binary low-density generator matrix (LDGM) code structure is proposed for a multi-access relay system. Another focus of this thesis is on the design of RF-enabled wireless energy transfer (WET) schemes. Much attention has been attracted by RF-enabled WET technology because of its capability enabling wireless devices to harvest energy from wireless signals for their intended applications. I first configure a power beacon (PB)-assisted wireless-powered communication network (PB-WPCN), which consists of a set of hybrid access point (AP)-source pairs and a PB. Both cooperative and non-cooperative scenarios are considered, based on whether the PB is cooperative with the APs or not. Besides, I develop a new distributed power control scheme for a power splitting-based interference channel (IFC) with simultaneous wireless information and power transfer (SWIPT), where the considered IFC consists of multiple source-destination pairs

Network Code Design for Orthogonal Two-hop Network with Broadcasting Relay: A Joint Source-Channel-Network Coding Approach

This paper addresses network code design for robust transmission of sources over an orthogonal two-hop wireless network with a broadcasting relay. The network consists of multiple sources and destinations in which each destination, benefiting the relay signal, intends to decode a subset of the sources. Two special instances of this network are orthogonal broadcast relay channel and the orthogonal multiple access relay channel. The focus is on complexity constrained scenarios, e.g., for wireless sensor networks, where channel coding is practically imperfect. Taking a source-channel and network coding approach, we design the network code (mapping) at the relay such that the average reconstruction distortion at the destinations is minimized. To this end, by decomposing the distortion into its components, an efficient design algorithm is proposed. The resulting network code is nonlinear and substantially outperforms the best performing linear network code. A motivating formulation of a family of structured nonlinear network codes is also presented. Numerical results and comparison with linear network coding at the relay and the corresponding distortion-power bound demonstrate the effectiveness of the proposed schemes and a promising research direction.Comment: 27 pages, 9 figures, Submited to IEEE Transaction on Communicatio

Capacity of wireless erasure networks

In this paper, a special class of wireless networks, called wireless erasure networks, is considered. In these networks, each node is connected to a set of nodes by possibly correlated erasure channels. The network model incorporates the broadcast nature of the wireless environment by requiring each node to send the same signal on all outgoing channels. However, we assume there is no interference in reception. Such models are therefore appropriate for wireless networks where all information transmission is packetized and where some mechanism for interference avoidance is already built in. This paper looks at multicast problems over these networks. The capacity under the assumption that erasure locations on all the links of the network are provided to the destinations is obtained. It turns out that the capacity region has a nice max-flow min-cut interpretation. The definition of cut-capacity in these networks incorporates the broadcast property of the wireless medium. It is further shown that linear coding at nodes in the network suffices to achieve the capacity region. Finally, the performance of different coding schemes in these networks when no side information is available to the destinations is analyzed

Optimal relay location and power allocation for low SNR broadcast relay channels

We consider the broadcast relay channel (BRC), where a single source transmits to multiple destinations with the help of a relay, in the limit of a large bandwidth. We address the problem of optimal relay positioning and power allocations at source and relay, to maximize the multicast rate from source to all destinations. To solve such a network planning problem, we develop a three-faceted approach based on an underlying information theoretic model, computational geometric aspects, and network optimization tools. Firstly, assuming superposition coding and frequency division between the source and the relay, the information theoretic framework yields a hypergraph model of the wideband BRC, which captures the dependency of achievable rate-tuples on the network topology. As the relay position varies, so does the set of hyperarcs constituting the hypergraph, rendering the combinatorial nature of optimization problem. We show that the convex hull C of all nodes in the 2-D plane can be divided into disjoint regions corresponding to distinct hyperarcs sets. These sets are obtained by superimposing all k-th order Voronoi tessellation of C. We propose an easy and efficient algorithm to compute all hyperarc sets, and prove they are polynomially bounded. Using the switched hypergraph approach, we model the original problem as a continuous yet non-convex network optimization program. Ultimately, availing on the techniques of geometric programming and $p$-norm surrogate approximation, we derive a good convex approximation. We provide a detailed characterization of the problem for collinearly located destinations, and then give a generalization for arbitrarily located destinations. Finally, we show strong gains for the optimal relay positioning compared to seemingly interesting positions.Comment: In Proceedings of INFOCOM 201

Relaying for Multiuser Networks in the Absence of Codebook Information

This work considers relay assisted transmission for multiuser networks when the relay has no access to the codebooks used by the transmitters. The relay is called oblivious for this reason. Of particular interest is the generalized compress-and-forward (GCF) strategy, where the destinations jointly decode the compression indices and the transmitted messages, and their optimality in this setting. The relay-to-destination links are assumed to be out-of-band with finite capacity. Two models are investigated: the multiple access relay channel (MARC) and the interference relay channel (IFRC). For the MARC with an oblivious relay, a new outerbound is derived and it is shown to be tight by means of achievability of the capacity region using GCF scheme. For the IFRC with an oblivious relay, a new strong interference condition is established, under which the capacity region is found by deriving a new outerbound and showing that it is achievable using GCF scheme. The result is further extended to establish the capacity region of M-user MARC with an oblivious relay, and multicast networks containing M sources and K destinations with an oblivious relay.Comment: submitted to IEEE Transactions on Information Theor