EXEL : a language for interactive behavioral synthesis

This paper describes a new input language for behavioral synthesis called EXEL. EXEL is a powerful language that permits the user to specify partially designed structures in the language. It employs a mixed graphic/textual user interface to enhance user interactivity. EXEL's design model is comprehensive: it permits specification of synchronous and asynchronous behavior, and allows specification of general timing constraints. A flexible type construct permits the user to define operators and components to be used in the description. Finally, it simplifies compilation by using a small set of constructs for specifying timing and asynchronouos behavior. The compiler for EXEL runs on SUN-3 workstations and is written in C and SUNVIEW

Behavioral synthesis from VHDL using structured modeling

This dissertation describes work in behavioral synthesis involving the development of a VHDL Synthesis System VSS which accepts a VHDL behavioral input specification and performs technology independent synthesis to generate a circuit netlist of generic components. The VHDL language is used for input and output descriptions. An intermediate representation which incorporates signal typing and component attributes simplifies compilation and facilitates design optimization.A Structured Modeling methodology has been developed to suggest standard VHDL modeling practices for synthesis. Structured modeling provides recommendations for the use of available VHDL description styles so that optimal designs will be synthesized.A design composed of generic components is synthesized from the input description through a process of Graph Compilation, Graph Criticism, and Design Compilation. Experiments were performed to demonstrate the effects of different modeling styles on the quality of the design produced by VSS. Several alternative VHDL models were examined for each benchmark, illustrating the improvements in design quality achieved when Structured Modeling guidelines were followed

EXTEND-L : an input language for extensible register transfer compilation

This report discusses the model and input language for EXTEND, a synthesis system that permits extensible register transfer synthesis. EXTEND-L fills the need for a language that bridges the gap between existing behavioral input descriptions, which are too abstract, and structural schematics, which cannot capture the high-level behavior. The report first discusses previous work in behavioral synthesis and summarizes the deficiencies of these behavioral specifications. The report then describes the proposed langauge in detail, and concludes with a few examples that show its utility

Efficient Simulation of Structural Faults for the Reliability Evaluation at System-Level

In recent technology nodes, reliability is considered a part of the standard design ¿ow at all levels of embedded system design. While techniques that use only low-level models at gate- and register transfer-level offer high accuracy, they are too inefficient to consider the overall application of the embedded system. Multi-level models with high abstraction are essential to efficiently evaluate the impact of physical defects on the system. This paper provides a methodology that leverages state-of-the-art techniques for efficient fault simulation of structural faults together with transaction-level modeling. This way it is possible to accurately evaluate the impact of the faults on the entire hardware/software system. A case study of a system consisting of hardware and software for image compression and data encryption is presented and the method is compared to a standard gate/RT mixed-level approac

Realizing live sequence charts in SystemVerilog.

The design of an embedded control system starts with an investigation of properties and behaviors of the process evolving within its environment, and an analysis of the requirement for its safety performance. In early stages, system requirements are often specified as scenarios of behavior using sequence charts for different use cases. This specification must be precise, intuitive and expressive enough to capture different aspects of embedded control systems. As a rather rich and useful extension to the classical message sequence charts, live sequence charts (LSC), which provide a rich collection of constructs for specifying both possible and mandatory behaviors, are very suitable for designing an embedded control system. However, it is not a trivial task to realize a high-level design model in executable program codes effectively and correctly. This paper tackles the challenging task by providing a mapping algorithm to automatically synthesize SystemVerilog programs from given LSC specifications

From FPGA to ASIC: A RISC-V processor experience

This work document a correct design flow using these tools in the Lagarto RISC- V Processor and the RTL design considerations that must be taken into account, to move from a design for FPGA to design for ASIC

Implementation of a Combined OFDM-Demodulation and WCDMA-Equalization Module

For a dual-mode baseband receiver for the OFDMWireless LAN andWCDMA standards, integration of the demodulation and equalization tasks on a dedicated hardware module has been investigated. For OFDM demodulation, an FFT algorithm based on cascaded twiddle factor decomposition has been selected. This type of algorithm combines high spatial and temporal regularity in the FFT data-flow graphs with a minimal number of computations. A frequency-domain algorithm based on a circulant channel approximation has been selected for WCDMA equalization. It has good performance, low hardware complexity and a low number of computations. Its main advantage is the reuse of the FFT kernel, which contributes to the integration of both tasks. The demodulation and equalization module has been described at the register transfer level with the in-house developed Arx language. The core of the module is a pipelined radix-23 butterfly combined with a complex multiplier and complex divider. The module has an area of 0.447 mm2 in 0.18 ¿m technology and a power consumption of 10.6 mW. The proposed module compares favorably with solutions reported in literature

High-level synthesis under I/O Timing and Memory constraints

The design of complex Systems-on-Chips implies to take into account communication and memory access constraints for the integration of dedicated hardware accelerator. In this paper, we present a methodology and a tool that allow the High-Level Synthesis of DSP algorithm, under both I/O timing and memory constraints. Based on formal models and a generic architecture, this tool helps the designer to find a reasonable trade-off between both the required I/O timing behavior and the internal memory access parallelism of the circuit. The interest of our approach is demonstrated on the case study of a FFT algorithm