83,250 research outputs found
Energy-efficient wireless communication
In this chapter we present an energy-efficient highly adaptive network interface architecture and a novel data link layer protocol for wireless networks that provides Quality of Service (QoS) support for diverse traffic types. Due to the dynamic nature of wireless networks, adaptations in bandwidth scheduling and error control are necessary to achieve energy efficiency and an acceptable quality of service. In our approach we apply adaptability through all layers of the protocol stack, and provide feedback to the applications. In this way the applications can adapt the data streams, and the network protocols can adapt the communication parameters
Reliable Physical Layer Network Coding
When two or more users in a wireless network transmit simultaneously, their
electromagnetic signals are linearly superimposed on the channel. As a result,
a receiver that is interested in one of these signals sees the others as
unwanted interference. This property of the wireless medium is typically viewed
as a hindrance to reliable communication over a network. However, using a
recently developed coding strategy, interference can in fact be harnessed for
network coding. In a wired network, (linear) network coding refers to each
intermediate node taking its received packets, computing a linear combination
over a finite field, and forwarding the outcome towards the destinations. Then,
given an appropriate set of linear combinations, a destination can solve for
its desired packets. For certain topologies, this strategy can attain
significantly higher throughputs over routing-based strategies. Reliable
physical layer network coding takes this idea one step further: using
judiciously chosen linear error-correcting codes, intermediate nodes in a
wireless network can directly recover linear combinations of the packets from
the observed noisy superpositions of transmitted signals. Starting with some
simple examples, this survey explores the core ideas behind this new technique
and the possibilities it offers for communication over interference-limited
wireless networks.Comment: 19 pages, 14 figures, survey paper to appear in Proceedings of the
IEE
Optical multiple access techniques for on-board routing
The purpose of this research contract was to design and analyze an optical multiple access system, based on Code Division Multiple Access (CDMA) techniques, for on board routing applications on a future communication satellite. The optical multiple access system was to effect the functions of a circuit switch under the control of an autonomous network controller and to serve eight (8) concurrent users at a point to point (port to port) data rate of 180 Mb/s. (At the start of this program, the bit error rate requirement (BER) was undefined, so it was treated as a design variable during the contract effort.) CDMA was selected over other multiple access techniques because it lends itself to bursty, asynchronous, concurrent communication and potentially can be implemented with off the shelf, reliable optical transceivers compatible with long term unattended operations. Temporal, temporal/spatial hybrids and single pulse per row (SPR, sometimes termed 'sonar matrices') matrix types of CDMA designs were considered. The design, analysis, and trade offs required by the statement of work selected a temporal/spatial CDMA scheme which has SPR properties as the preferred solution. This selected design can be implemented for feasibility demonstration with off the shelf components (which are identified in the bill of materials of the contract Final Report). The photonic network architecture of the selected design is based on M(8,4,4) matrix codes. The network requires eight multimode laser transmitters with laser pulses of 0.93 ns operating at 180 Mb/s and 9-13 dBm peak power, and 8 PIN diode receivers with sensitivity of -27 dBm for the 0.93 ns pulses. The wavelength is not critical, but 830 nm technology readily meets the requirements. The passive optical components of the photonic network are all multimode and off the shelf. Bit error rate (BER) computations, based on both electronic noise and intercode crosstalk, predict a raw BER of (10 exp -3) when all eight users are communicating concurrently. If better BER performance is required, then error correction codes (ECC) using near term electronic technology can be used. For example, the M(8,4,4) optical code together with Reed-Solomon (54,38,8) encoding provides a BER of better than (10 exp -11). The optical transceiver must then operate at 256 Mb/s with pulses of 0.65 ns because the 'bits' are now channel symbols
Random Linear Network Coding for 5G Mobile Video Delivery
An exponential increase in mobile video delivery will continue with the
demand for higher resolution, multi-view and large-scale multicast video
services. Novel fifth generation (5G) 3GPP New Radio (NR) standard will bring a
number of new opportunities for optimizing video delivery across both 5G core
and radio access networks. One of the promising approaches for video quality
adaptation, throughput enhancement and erasure protection is the use of
packet-level random linear network coding (RLNC). In this review paper, we
discuss the integration of RLNC into the 5G NR standard, building upon the
ideas and opportunities identified in 4G LTE. We explicitly identify and
discuss in detail novel 5G NR features that provide support for RLNC-based
video delivery in 5G, thus pointing out to the promising avenues for future
research.Comment: Invited paper for Special Issue "Network and Rateless Coding for
Video Streaming" - MDPI Informatio
- …