14,452 research outputs found
Secure Communications in Millimeter Wave Ad Hoc Networks
Wireless networks with directional antennas, like millimeter wave (mmWave)
networks, have enhanced security. For a large-scale mmWave ad hoc network in
which eavesdroppers are randomly located, however, eavesdroppers can still
intercept the confidential messages, since they may reside in the signal beam.
This paper explores the potential of physical layer security in mmWave ad hoc
networks. Specifically, we characterize the impact of mmWave channel
characteristics, random blockages, and antenna gains on the secrecy
performance. For the special case of uniform linear array (ULA), a tractable
approach is proposed to evaluate the average achievable secrecy rate. We also
characterize the impact of artificial noise in such networks. Our results
reveal that in the low transmit powerregime, the use of low mmWave frequency
achieves better secrecy performance, and when increasing transmit power, a
transition from low mmWave frequency to high mmWave frequency is demanded for
obtaining a higher secrecy rate. More antennas at the transmitting nodes are
needed to decrease the antenna gain obtained by the eavesdroppers when using
ULA. Eavesdroppers can intercept more information by using a wide beam pattern.
Furthermore, the use of artificial noise may be ineffective for enhancing the
secrecy rate.Comment: Accepted by IEEE Transactions on Wireless Communication
60 GHz MAC Standardization: Progress and Way Forward
Communication at mmWave frequencies has been the focus in the recent years.
In this paper, we discuss standardization efforts in 60 GHz short range
communication and the progress therein. We compare the available standards in
terms of network architecture, medium access control mechanisms, physical layer
techniques and several other features. Comparative analysis indicates that IEEE
802.11ad is likely to lead the short-range indoor communication at 60 GHz. We
bring to the fore resolved and unresolved issues pertaining to robust WLAN
connectivity at 60 GHz. Further, we discuss the role of mmWave bands in 5G
communication scenarios and highlight the further efforts required in terms of
research and standardization
Regulatory and Policy Implications of Emerging Technologies to Spectrum Management
This paper provides an overview of the policy implications of technological developments, and how these technologies can accommodate an increased level of market competition. It is based on the work carried out in the SPORT VIEWS (Spectrum Policies and Radio Technologies Viable In Emerging Wireless Societies) research project for the European Commission (FP6)spectrum, new radio technologies, UWB, SDR, cognitive radio, Telecommunications, regulation, Networks, Interconnection
Understanding Noise and Interference Regimes in 5G Millimeter-Wave Cellular Networks
With the severe spectrum shortage in conventional cellular bands,
millimeter-wave (mmWave) frequencies have been attracting growing attention for
next-generation micro- and picocellular wireless networks. A fundamental and
open question is whether mmWave cellular networks are likely to be noise- or
interference-limited. Identifying in which regime a network is operating is
critical for the design of MAC and physical-layer procedures and to provide
insights on how transmissions across cells should be coordinated to cope with
interference. This work uses the latest measurement-based statistical channel
models to accurately assess the Interference-to-Noise Ratio (INR) in a wide
range of deployment scenarios. In addition to cell density, we also study
antenna array size and antenna patterns, whose effects are critical in the
mmWave regime. The channel models also account for blockage, line-of-sight and
non-line-of-sight regimes as well as local scattering, that significantly
affect the level of spatial isolation
Hybrid Satellite-Terrestrial Communication Networks for the Maritime Internet of Things: Key Technologies, Opportunities, and Challenges
With the rapid development of marine activities, there has been an increasing
number of maritime mobile terminals, as well as a growing demand for high-speed
and ultra-reliable maritime communications to keep them connected.
Traditionally, the maritime Internet of Things (IoT) is enabled by maritime
satellites. However, satellites are seriously restricted by their high latency
and relatively low data rate. As an alternative, shore & island-based base
stations (BSs) can be built to extend the coverage of terrestrial networks
using fourth-generation (4G), fifth-generation (5G), and beyond 5G services.
Unmanned aerial vehicles can also be exploited to serve as aerial maritime BSs.
Despite of all these approaches, there are still open issues for an efficient
maritime communication network (MCN). For example, due to the complicated
electromagnetic propagation environment, the limited geometrically available BS
sites, and rigorous service demands from mission-critical applications,
conventional communication and networking theories and methods should be
tailored for maritime scenarios. Towards this end, we provide a survey on the
demand for maritime communications, the state-of-the-art MCNs, and key
technologies for enhancing transmission efficiency, extending network coverage,
and provisioning maritime-specific services. Future challenges in developing an
environment-aware, service-driven, and integrated satellite-air-ground MCN to
be smart enough to utilize external auxiliary information, e.g., sea state and
atmosphere conditions, are also discussed
The history of WiMAX: a complete survey of the evolution in certification and standarization for IEEE 802.16 and WiMAX
Most researchers are familiar with the technical features of WiMAX technology but the evolution that WiMAX went through, in terms of standardization and certification, is missing and unknown to most people. Knowledge of this historical process would however aid to understand how WiMAX has become the widespread technology that it is today. Furthermore, it would give insight in the steps to undertake for anyone aiming at introducing a new wireless technology on a worldwide scale. Therefore, this article presents a survey on all relevant activities that took place within three important organizations: the 802.16 Working Group of the IEEE (Institute of Electrical and Electronics Engineers) for technology development and standardization, the WiMAX Forum for product certification and the ITU (International Telecommunication Union) for international recognition. An elaborated and comprehensive overview of all those activities is given, which reveals the importance of the willingness to innovate and to continuously incorporate new ideas in the IEEE standardization process and the importance of the WiMAX Forum certification label granting process to ensure interoperability. We also emphasize the steps that were taken in cooperating with the ITU to improve the international esteem of the technology. Finally, a WiMAX trend analysis is made. We showed how industry interest has fluctuated over time and quantified the evolution in WiMAX product certification and deployments. It is shown that most interest went to the 2.5 GHz and 3.5GHz frequencies, that most deployments are in geographic regions with a lot of developing countries and that the highest people coverage is achieved in Asia Pacific. This elaborated description of all standardization and certification activities, from the very start up to now, will make the reader comprehend how past and future steps are taken in the development process of new WiMAX features
- …