Antenna and Random Access Solutions for nano-satellite and 5G networks operating in the millimiter-wave domain

L\u2019obiettivo di questa tesi \ue8 la discussione di soluzioni per reti satellitari basate su nano-satelliti e reti 5G, operanti in onde millimetriche. I contributi originali di questo lavoro interessano due settori che ricoprono un ruolo chiave nel contesto delle comunicazioni digitali ad alta velocit\ue0 e alta capacit\ue0: i meccanismi di condivisione del mezzo trasmissivo basati sull\u2019accesso casuale e le antenne a schiera riconfigurabili e compatte. I risultati ottenuti in questi due ambiti sono poi applicati in un\u2019architettura di rete che integra sistemi 5G terrestri e una costellazione di nanosatelliti in orbita bassa. Le comunicazioni satellitari sono sempre pi\uf9 parte integrante della vita quotidiana. Negli ultimi anni, si \ue8 registrata una crescita notevole dei piccoli satelliti (da 1 a 100 kg), sia in termini di tecnologia, che di frequenza di utilizzo. Non solo vengono lanciati in gran numero, ma si \ue8 iniziato ad utilizzarli in costellazioni da diverse decine di unit\ue0. Questa attivit\ue0 \ue8 l\u2019indicatore di una prospettiva ormai prossima: gli sviluppi nel settore dell\u2019Information and Communication Technology hanno avviato diverse iniziative che puntano ad utilizzare megacostellazioni di satelliti come reti per la fornitura di servizi di comunicazione a banda larga. Lo sfruttamento delle onde millimetriche rappresenta quindi un punto cardine per soddisfare la crescente richiesta di capacit\ue0 dei sistemi radio di prossima generazione. Inoltre, lo scenario che ne risulta \ue8 tale da richiedere una connettivit\ue0 completa, cos\uec che ogni satellite operi come un nodo di rete a tutto tondo, con possibilit\ue0 di collegamento tra la terra e lo spazio, e da satellite a satellite. In tale contesto, il ricorso a moderne tecniche di accesso casuale \ue8 particolarmente indicato. Negli ultimi anni si \ue8 assistito a un rinnovato interesse per i protocolli di tipo Aloha, grazie alla possibilit\ue0 di dotare i ricevitori di sistemi di cancellazione dell\u2019interferenza. A tale proposito, viene presentato un nuovo algoritmo che affianca alla cancellazione iterativa di interferenza lo sfruttamento dell\u2019effetto cattura, tenendo al tempo stesso presente la possibile non idealit\ue0 della cancellazione, e quindi la presenza di un residuo. Le sue prestazioni sono confrontate con i metodi attualmente adottati negli standard, mostrando un miglioramento del throughput pari al 31%. Viene inoltre presentata la sintesi di un\u2019antenna a schiera operante in banda Ka adatta per l\u2019uso su nanosatelliti. La schiera risultante offre interessanti benefici in termini di larghezza di banda, polarizzazione e versatilit\ue0, essendo possibile un utilizzo dual-task (downlink verso terra e collegamentointersatellitare). I risultati cos\uec ottenuti sono poi utilizzati per dimostrare, in un simulatore tempo discreto ed evento discreto, le prestazioni ottenibili da un\u2019architettura di rete integrante segmenti di rete radiomobile 5G con una dorsale costituita da una costellazione di nanosatellti. Il simulatore si avvale inoltre di un modello teorico per valutare l\u2019impatto della distribuzione geometrica dei nodi interferenti su una comunicazione in onde millimetriche di tipo line-of-sight. Tale modello, validato con simulazioni di tipo Monte Carlo, contempla i diagrammi di radiazione delle antenne e i recenti modelli di canale in onde millimetriche, che tengono in considerazione rumore, dispersione angolare, fading e bounded path loss. Sono state ricavate delle formulazioni analitiche per la distribuzione della potenza di rumore e interferenza, che consentono di valutare in forma chiusa la probabilit\ue0 di cattura. Tale impostazione \ue8 stata infine usata per discutere gli effetti dell\u2019interferenza sulla capacit\ue0 di Shannon di un collegamento in uplink operante in onde millimetriche, prendendo in considerazione delle condizioni realistiche per il canale

A STUDY OF ERASURE CORRECTING CODES

This work focus on erasure codes, particularly those that of high performance, and the related decoding algorithms, especially with low computational complexity. The work is composed of different pieces, but the main components are developed within the following two main themes. Ideas of message passing are applied to solve the erasures after the transmission. Efficient matrix-representation of the belief propagation (BP) decoding algorithm on the BEG is introduced as the recovery algorithm. Gallager's bit-flipping algorithm are further developed into the guess and multi-guess algorithms especially for the application to recover the unsolved erasures after the recovery algorithm. A novel maximum-likelihood decoding algorithm, the In-place algorithm, is proposed with a reduced computational complexity. A further study on the marginal number of correctable erasures by the In-place algoritinn determines a lower bound of the average number of correctable erasures. Following the spirit in search of the most likable codeword based on the received vector, we propose a new branch-evaluation- search-on-the-code-tree (BESOT) algorithm, which is powerful enough to approach the ML performance for all linear block codes. To maximise the recovery capability of the In-place algorithm in network transmissions, we propose the product packetisation structure to reconcile the computational complexity of the In-place algorithm. Combined with the proposed product packetisation structure, the computational complexity is less than the quadratic complexity bound. We then extend this to application of the Rayleigh fading channel to solve the errors and erasures. By concatenating an outer code, such as BCH codes, the product-packetised RS codes have the performance of the hard-decision In-place algorithm significantly better than that of the soft-decision iterative algorithms on optimally designed LDPC codes

Cellular, Wide-Area, and Non-Terrestrial IoT: A Survey on 5G Advances and the Road Towards 6G

The next wave of wireless technologies is proliferating in connecting things among themselves as well as to humans. In the era of the Internet of things (IoT), billions of sensors, machines, vehicles, drones, and robots will be connected, making the world around us smarter. The IoT will encompass devices that must wirelessly communicate a diverse set of data gathered from the environment for myriad new applications. The ultimate goal is to extract insights from this data and develop solutions that improve quality of life and generate new revenue. Providing large-scale, long-lasting, reliable, and near real-time connectivity is the major challenge in enabling a smart connected world. This paper provides a comprehensive survey on existing and emerging communication solutions for serving IoT applications in the context of cellular, wide-area, as well as non-terrestrial networks. Specifically, wireless technology enhancements for providing IoT access in fifth-generation (5G) and beyond cellular networks, and communication networks over the unlicensed spectrum are presented. Aligned with the main key performance indicators of 5G and beyond 5G networks, we investigate solutions and standards that enable energy efficiency, reliability, low latency, and scalability (connection density) of current and future IoT networks. The solutions include grant-free access and channel coding for short-packet communications, non-orthogonal multiple access, and on-device intelligence. Further, a vision of new paradigm shifts in communication networks in the 2030s is provided, and the integration of the associated new technologies like artificial intelligence, non-terrestrial networks, and new spectra is elaborated. Finally, future research directions toward beyond 5G IoT networks are pointed out.Comment: Submitted for review to IEEE CS&

Location-aware and Cooperative Communication in an OFDM based Ultra-wideband Radio System

Die auf dem orthogonalen Frequenzmultiplex (OFDM, Orthogonal Frequency Division Multiplexing) basierende Ultra-Breitband-(UWB, Ultra-wideband) Technologie stellt eine verheißungsvolle Technologie dar, um hohe Datenübertragungsraten und Lokalisierungs- und deren Tracking-Anwendungen zu realisieren. Im Gegensatz zu anderen Systemen ist die Reichweite von OFDM UWB Systemen durch eine strenge Regulierung sehr stark begrenzt. Darüber hinaus ist die Lokalisierung nicht zufriedenstellend. Damit sind bereits die beiden größten Nachteile im Bezug auf bestehende OFDM UWB System benannt. Die Motivation und Hauptaufgabe dieser Arbeit ist damit die Lösung der eben genannten Nachteile. Es wird ein OFDM UWB System vorgestellt, das Space Frequency Block Coding (SFBC) und FFH OFDM miteinander verbindet. Dieses vereinte System wertet die räumliche und frequentielle Diversität eines OFDM-Symbols aus und zeigt dabei eine hohe Güte in der Punkt-zu-Punkt Kommunikation. Beim Design von kooperativen UWB-Systemen wird ein AF-(Amplify-and-Forward) basiertes echtzeitfähriges SFBC-TFC (Time Frequency Code) Protokoll vorgestellt. In Kombination mit den oben genannten Strategien, kann eine Erhöhung in den Reichweite von OFDM UWB Systemen erreicht werden. In den Ausführungen zur Ortung anhand von OFDM UWB Signalen wird ein Algorithmus entwickelt, der aufgrund einer Kanalschätzung eine Minimierung des Phasenversatzes zwischen geschätztem und realem Kanal im Frequenzbereich durchführt. Diese Minimierung erwirkt eine Unterdrückung der Energie am Ende der Kanalimpulsantwort (CIR, Channel Impulse Response) im Zeitbereich. Zum Zweck der einfachen Implementierbarkeit wird das RTT (Round-Trip-Time) Messprotokoll in WiMedia UWB Systemen dahingehend verändert, dass das mobile Gerät keine Minimierung vornimmt. Es leitet seine Informationen an das mit ihm Kommunizierende, stationäre Gerät weiter, das direkt den gesamten Zeitversatz innerhalb des RTT berechnet. Der vorgeschlagene Algorithmus und das vorgeschlagene Protokoll haben ein besseres Ortungsvermögen als bekannte UWB Lokalisierungsprozeduren und bedürfen nur etwas zusätzlicher Berechnungsleistung. Diese Arbeit zeigt, dass Systeme mit hohen Datenraten wie OFDM UWB auch eine gute Lokalisierungsgenauigkeit erreichen können. Zusätzlich ist die Schwachstelle einer limitierten Reichweite ebenso kompensiert worden. Diese Erweiterungen dienen der Entwicklung von nützlichen UWB-Applikationen und sichern den Anteil der OFDM UWB Technik im Markt der drahtlosen Kommunikationssysteme der Zukunft.The Orthogonal Frequency Division Multiplexing (OFDM) based Ultra-wideband (UWB) is one of the most promising technologies for high data rate transmission and localization and tracking applications. However, the restricted transmit power causes a shorter communication range compared to other indoor radio systems. In addition, the ranging functionality is still not well supported by the current OFDM based UWB technology. These two drawbacks are the main disadvantages existing in the current OFDM UWB systems. To get rid of the two drawbacks, is the motivation and main task of this thesis. Within the scope of this thesis, a joint design of Space Frequency Block Coding (SFBC) with Fast Frequency Hopping (FFH) OFDM scheme is investigated in a multiple antenna OFDM UWB system. The joint scheme is able to exploit spatial and frequency domain diversity within one OFDM symbol, and can improve the data transmission quality in point-to-point communication. To the cooperative communication in UWB systems, an Amplify-and-Forward (AF) based distributed SFBC-TFC (Time Frequency Code) protocol is designed. In combination with the aforementioned strategies an increase in the communication range is achieved. Within the scope of this thesis, accurate ranging schemes for the OFDM UWB systems are designed. Fine ToA detection method based on the estimated channel is developed. The fine ToA is estimated by minimizing the accumulated energy of the tail taps of the estimated Channel Impulse Response (CIR). For the purpose of a feasible implementation, the Round-Trip-Time (RTT) measurement protocol in [WiM09] is modified in a way that the complicated computational tasks are burden onto the powerful device. The proposed fine ToA detection method and modified RTT protocol provides an accurate ranging capability and ensures feasible implementation to the MB-OFDM UWB systems. In carrying out this scheme, only some computational tasks are needed, no extra hardware support is required. It is shown in this thesis, OFDM UWB systems with very high data rate transmission and good ranging capability could be achieved, and the weakness of limited communication range is also compensated. These improvements will cause the rise of more valuable UWB applications for customers and ensures a bright future for the OFDM UWB technique

A General Framework for Analyzing, Characterizing, and Implementing Spectrally Modulated, Spectrally Encoded Signals

Fourth generation (4G) communications will support many capabilities while providing universal, high speed access. One potential enabler for these capabilities is software defined radio (SDR). When controlled by cognitive radio (CR) principles, the required waveform diversity is achieved via a synergistic union called CR-based SDR. Research is rapidly progressing in SDR hardware and software venues, but current CR-based SDR research lacks the theoretical foundation and analytic framework to permit efficient implementation. This limitation is addressed here by introducing a general framework for analyzing, characterizing, and implementing spectrally modulated, spectrally encoded (SMSE) signals within CR-based SDR architectures. Given orthogonal frequency division multiplexing (OFDM) is a 4G candidate signal, OFDM-based signals are collectively classified as SMSE since modulation and encoding are spectrally applied. The proposed framework provides analytic commonality and unification of SMSE signals. Applicability is first shown for candidate 4G signals, and resultant analytic expressions agree with published results. Implementability is then demonstrated in multiple coexistence scenarios via modeling and simulation to reinforce practical utility

Evaluation of unidirectional background push content download services for the delivery of television programs

Este trabajo de tesis presenta los servicios de descarga de contenido en modo push como un mecanismo eficiente para el envío de contenido de televisión pre-producido sobre redes de difusión. Hoy en día, los operadores de red dedican una cantidad considerable de recursos de red a la entrega en vivo de contenido televisivo, tanto sobre redes de difusión como sobre conexiones unidireccionales. Esta oferta de servicios responde únicamente a requisitos comerciales: disponer de los contenidos televisivos en cualquier momento y lugar. Sin embargo, desde un punto de vista estrictamente académico, el envío en vivo es únicamente un requerimiento para el contenido en vivo, no para contenidos que ya han sido producidos con anterioridad a su emisión. Más aún, la difusión es solo eficiente cuando el contenido es suficientemente popular. Los servicios bajo estudio en esta tesis utilizan capacidad residual en redes de difusión para enviar contenido pre-producido para que se almacene en los equipos de usuario. La propuesta se justifica únicamente por su eficiencia. Por un lado, genera valor de recursos de red que no se aprovecharían de otra manera. Por otro lado, realiza la entrega de contenidos pre-producidos y populares de la manera más eficiente: sobre servicios de descarga de contenidos en difusión. Los resultados incluyen modelos para la popularidad y la duración de contenidos, valiosos para cualquier trabajo de investigación basados en la entrega de contenidos televisivos. Además, la tesis evalúa la capacidad residual disponible en redes de difusión, por medio de estudios empíricos. Después, estos resultados son utilizados en simulaciones que evalúan las prestaciones de los servicios propuestos en escenarios diferentes y para aplicaciones diferentes. La evaluación demuestra que este tipo de servicios son un recurso muy útil para la entrega de contenido televisivo.This thesis dissertation presents background push Content Download Services as an efficient mechanism to deliver pre-produced television content through existing broadcast networks. Nowadays, network operators dedicate a considerable amount of network resources to live streaming live, through both broadcast and unicast connections. This service offering responds solely to commercial requirements: Content must be available anytime and anywhere. However, from a strictly academic point of view, live streaming is only a requirement for live content and not for pre-produced content. Moreover, broadcasting is only efficient when the content is sufficiently popular. The services under study in this thesis use residual capacity in broadcast networks to push popular, pre-produced content to storage capacity in customer premises equipment. The proposal responds only to efficiency requirements. On one hand, it creates value from network resources otherwise unused. On the other hand, it delivers popular pre-produced content in the most efficient way: through broadcast download services. The results include models for the popularity and the duration of television content, valuable for any research work dealing with file-based delivery of television content. Later, the thesis evaluates the residual capacity available in broadcast networks through empirical studies. These results are used in simulations to evaluate the performance of background push content download services in different scenarios and for different applications. The evaluation proves that this kind of services can become a great asset for the delivery of television contentFraile Gil, F. (2013). Evaluation of unidirectional background push content download services for the delivery of television programs [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/31656TESI

Optical Communication

Optical communication is very much useful in telecommunication systems, data processing and networking. It consists of a transmitter that encodes a message into an optical signal, a channel that carries the signal to its desired destination, and a receiver that reproduces the message from the received optical signal. It presents up to date results on communication systems, along with the explanations of their relevance, from leading researchers in this field. The chapters cover general concepts of optical communication, components, systems, networks, signal processing and MIMO systems. In recent years, optical components and other enhanced signal processing functions are also considered in depth for optical communications systems. The researcher has also concentrated on optical devices, networking, signal processing, and MIMO systems and other enhanced functions for optical communication. This book is targeted at research, development and design engineers from the teams in manufacturing industry, academia and telecommunication industries

Coherent receiver design and analysis for interleaved division multiple access (IDMA)

This thesis discusses a new multiuser detection technique for cellular wireless communications. Multiuser communications is critical in cellular systems as multiple terminals (users) transmit to base stations (or wireless infrastructure). Efficient receiver methods are needed to maximise the performance of these links and maximise overall throughput and coverage while minimising inter-cell interference. Recently a new technique, Interleave-Division Multiple Access (IDMA), was developed as a variant of direct-sequence code division multiple access (DS-CDMA). In this new scheme users are separated by user specific interleavers, and each user is allocated a low rate code. As a result, the bandwidth expansion is devoted to the low rate code and not weaker spreading codes. IDMA has shown to have significant performance gains over traditional DS-CDMA with a modest increase in complexity. The literature on IDMA primarily focuses on the design of low rate forward error correcting (FEC) codes, as well as channel estimation. However, the practical aspects of an IDMA receiver such as timing acquisition, tracking, block asynchronous detection, and cellular analysis are rarely studied. The objective of this thesis is to design and analyse practical synchronisation, detection and power optimisation techniques for IDMA systems. It also, for the first time, provides a novel analysis and design of a multi-cell system employing a general multiuser receiver. These tools can be used to optimise and evaluate the performance of an IDMA communication system. The techniques presented in this work can be easily employed for DS-CDMA or other multiuser receiver designs with slight modification. Acquisition and synchronisation are essential processes that a base-station is required to perform before user's data can be detected and decoded. For high capacity IDMA systems, which can be heavily loaded and operate close to the channel capacity, the performance of acquisition and tracking can be severely affected by multiple access interference as well as severe drift. This thesis develops acquisition and synchronisation algorithms which can cope with heavy multiple access interference as well as high levels of drift. Once the timing points have been estimated for an IDMA receiver the detection and decoding process can proceed. An important issue with uplink systems is the alignment of frame boundaries for efficient detection. This thesis demonstrates how a fully asynchronous system can be modelled for detection. This thesis presents a model for the frame asynchronous IDMA system, and then develops a maximum likelihood receiver for the proposed system. This thesis develops tools to analyse and optimise IDMA receivers. The tools developed are general enough to be applied to other multiuser receiver techniques. The conventional EXIT chart analysis of unequal power allocated multiuser systems use an averaged EXIT chart analysis for all users to reduce the complexity of the task. This thesis presents a multidimensional analysis for power allocated IDMA, and shows how it can be utilised in power optimisation. Finally, this work develops a novel power zoning technique for multicell multiuser receivers using the optimised power levels, and illustrates a particular example where there is a 50% capacity improvement using the proposed scheme. -- provided by Candidate

Joint signal detection and channel estimation in rank-deficient MIMO systems

L'évolution de la prospère famille des standards 802.11 a encouragé le développement des technologies appliquées aux réseaux locaux sans fil (WLANs). Pour faire face à la toujours croissante nécessité de rendre possible les communications à très haut débit, les systèmes à antennes multiples (MIMO) sont une solution viable. Ils ont l'avantage d'accroître le débit de transmission sans avoir recours à plus de puissance ou de largeur de bande. Cependant, l'industrie hésite encore à augmenter le nombre d'antennes des portables et des accésoires sans fil. De plus, à l'intérieur des bâtiments, la déficience de rang de la matrice de canal peut se produire dû à la nature de la dispersion des parcours de propagation, ce phénomène est aussi occasionné à l'extérieur par de longues distances de transmission. Ce projet est motivé par les raisons décrites antérieurement, il se veut un étude sur la viabilité des transcepteurs sans fil à large bande capables de régulariser la déficience de rang du canal sans fil. On vise le développement des techniques capables de séparer M signaux co-canal, même avec une seule antenne et à faire une estimation précise du canal. Les solutions décrites dans ce document cherchent à surmonter les difficultés posées par le medium aux transcepteurs sans fil à large bande. Le résultat de cette étude est un algorithme transcepteur approprié aux systèmes MIMO à rang déficient