Tracking algorithms for multistatic sonar systems

Abstract Activated reconnaissance systems based on target illumination are of high importance for surveillance tasks where targets are nonemitting. Multistatic configurations, where multiple illuminators and multiple receivers are located separately, are of particular interest. The fusion of measurements is a prerequisite for extracting and maintaining target tracks. The inherent ambiguity of the data makes the use of adequate algorithms, such as multiple hypothesis tracking, inevitable. For their design, the understanding of the residual clutter, the sensor resolution and the characteristic impact of the propagation medium is important. This leads to precise sensor models, which are able to determine the performance of the surveillance team. Incorporating these models in multihypothesis tracking leads to a situationally aware data fusion and tracking algorithm. Various implementations of this algorithm are evaluated with the help of simulated and measured data sets. Incorporating model knowledge leads to increased performance, but only if the model is in line with the physical reality: we need to find a compromise between refined and robust tracking models. Furthermore, to implement the model, which is inherently nonlinear for multistatic sonar, approximations have to be made. When engineering the multistatic tracking system, sensitivity studies help to tune model assumptions and approximations

Multistatic Tracking with the Maximum Likelihood Probabilistic Multi-Hypothesis Tracker

Multistatic sonar tracking is a difficult proposition. The ocean environment typically features very complex propagation conditions, causing low target probabilities of detection and high clutter levels. Additionally, most sonar targets are relatively low speed, which makes it difficult to use Doppler (if available) to separate target returns from clutter returns. The Maximum Likelihood Probabilistic Data Association Tracker (ML-PDA) and the Maximum Likelihood Probabilistic Multi-Hypothesis Tracker (ML-PMHT) --- a similar algorithm to ML-PDA --- can be implemented as effective multistatic trackers. This dissertation will develop a tracking framework for these algorithms. This framework will focus mainly on ML-PMHT, which has an inherent advantage in that its log-likelihood ratio (LLR) has a simple multitarget formulation, which allows it to be implemented as a true multitarget tracker. First, this multitarget LLR will be implemented for ML-PMHT, which will give it superior performance over ML-PDA for instances where multiple targets are closely spaced with similar motion dynamics. Next, the performance of ML-PMHT will be compared when it is applied in Cartesian measurement space and in delay-bearing measurement space, where the measurement covariance is more accurately represented. Following this, a maneuver-model parameterization will be introduced that will allow ML-PDA and ML-PMHT to follow sharply maneuvering targets; their previous straight-line parameterization only allowed them to follow moderately maneuvering targets. Finally, a novel method of determining a tracking threshold for ML-PMHT will be developed by applying extreme value theory to the probabilistic properties of the clutter. This will also be done with target measurements, which will allow the issue of trackability for ML-PMHT to be explored. Probabilistic expressions for the maximum values of the LLR surface caused by both clutter and the target will be developed, which will allow for the determination of target trackability in any given scenario

3D Localization and Tracking Methods for Multi-Platform Radar Networks

Multi-platform radar networks (MPRNs) are an emerging sensing technology due to their ability to provide improved surveillance capabilities over plain monostatic and bistatic systems. The design of advanced detection, localization, and tracking algorithms for efficient fusion of information obtained through multiple receivers has attracted much attention. However, considerable challenges remain. This article provides an overview on recent unconstrained and constrained localization techniques as well as multitarget tracking (MTT) algorithms tailored to MPRNs. In particular, two data-processing methods are illustrated and explored in detail, one aimed at accomplishing localization tasks the other tracking functions. As to the former, assuming a MPRN with one transmitter and multiple receivers, the angular and range constrained estimator (ARCE) algorithm capitalizes on the knowledge of the transmitter antenna beamwidth. As to the latter, the scalable sum-product algorithm (SPA) based MTT technique is presented. Additionally, a solution to combine ARCE and SPA-based MTT is investigated in order to boost the accuracy of the overall surveillance system. Simulated experiments show the benefit of the combined algorithm in comparison with the conventional baseline SPA-based MTT and the stand-alone ARCE localization, in a 3D sensing scenario

Novel methods for multi-target tracking with applications in sensor registration and fusion

Maintaining surveillance over vast volumes of space is an increasingly important capability for the defence industry. A clearer and more accurate picture of a surveillance region could be obtained through sensor fusion between a network of sensors. However, this accurate picture is dependent on the sensor registration being resolved. Any inaccuracies in sensor location or orientation can manifest themselves into the sensor measurements that are used in the fusion process, and lead to poor target tracking performance. Solutions previously proposed in the literature for the sensor registration problem have been based on a number of assumptions that do not always hold in practice, such as having a synchronous network and having small, static registration errors. This thesis will propose a number of solutions to resolving the sensor registration and sensor fusion problems jointly in an efficient manner. The assumptions made in previous works will be loosened or removed, making the solutions more applicable to problems that we are likely to see in practice. The proposed methods will be applied to both simulated data, and a segment of data taken from a live trial in the field

On particle filters in radar target tracking

The dissertation focused on the research, implementation, and evaluation of particle filters for radar target track filtering of a maneuvering target, through quantitative simulations and analysis thereof. Target track filtering, also called target track smoothing, aims to minimize the error between a radar target's predicted and actual position. From the literature it had been suggested that particle filters were more suitable for filtering in non-linear/non-Gaussian systems. Furthermore, it had been determined that particle filters were a relatively newer field of research relating to radar target track filtering for non-linear, non-Gaussian maneuvering target tracking problems, compared to the more traditional and widely known and implemented approaches and techniques. The objectives of the research project had been achieved through the development of a software radar target tracking filter simulator, which implemented a sequential importance re-sampling particle filter algorithm and suitable target and noise models. This particular particle filter had been identified from a review of the theory of particle filters. The theory of the more conventional tracking filters used in radar applications had also been reviewed and discussed. The performance of the sequential importance re-sampling particle filter for radar target track filtering had been evaluated through quantitative simulations and analysis thereof, using predefined metrics identified from the literature. These metrics had been the root mean squared error metric for accuracy, and the normalized processing time metric for computational complexity. It had been shown that the sequential importance re-sampling particle filter achieved improved accuracy performance in the track filtering of a maneuvering radar target in a non-Gaussian (Laplacian) noise environment, compared to a Gaussian noise environment. It had also been shown that the accuracy performance of the sequential importance re-sampling particle filter is a function of the number of particles used in the sequential importance re-sampling particle filter algorithm. The sequential importance re-sampling particle filter had also been compared to two conventional tracking filters, namely the alpha-beta filter and the Singer-Kalman filter, and had better accuracy performance in both cases. The normalized processing time of the sequential importance re-sampling particle filter had been shown to be a function of the number of particles used in the sequential importance re-sampling particle filter algorithm. The normalized processing time of the sequential importance re-sampling particle filter had been shown to be higher than that of both the alpha-beta filter and the Singer-Kalman filter. Analysis of the posterior Cramér-Rao lower bound of the sequential importance re-sampling particle filter had also been conducted and presented in the dissertation

Robust Multi-target Tracking with Bootstrapped-GLMB Filter

This dissertation presents novel multi-target tracking algorithms that obviate the need for prior knowledge of system parameters such as clutter rate, detection probabilities, and birth models. Information on these parameters is unknown but important to tracking performance. The proposed algorithms exploit the advantages of existing RFS trackers and filters by bootstrapping them. This configuration inherits the efficiency of tracking target trajectories from the RFS trackers and low complexity in parameter estimation from the RFS filters

Integrated perception, modeling, and control paradigm for bistatic sonar tracking by autonomous underwater vehicles

Thesis (Sc. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2012.Cataloged from PDF version of thesis.Includes bibliographical references (p. 357-364).In this thesis, a fully autonomous and persistent bistatic anti-submarine warfare (ASW) surveillance solution is developed using the autonomous underwater vehicles (AUVs). The passive receivers are carried by these AUVs, and are physically separated from the cooperative active sources. These sources are assumed to be transmitting both the frequency-modulated (FM) and continuous wave (CW) sonar pulse signals. The thesis then focuses on providing novel methods for the AUVs/receivers to enhance the bistatic sonar tracking performance. Firstly, the surveillance procedure, called the Automated Perception, is developed to automatically abstract the sensed acoustical data from the passive receiver to the track report that represents the situation awareness. The procedure is executed sequentially by two algorithms: (i) the Sonar Signal Processing algorithm - built with a new dual-waveform fusion of the FM and CW signals to achieve reliable stream of contacts for improved tracking; and (ii) the Target Tracking algorithm - implemented by exploiting information and environmental adaptations to optimize tracking performance. Next, a vehicular control strategy, called the Perception-Driven Control, is devised to move the AUV in reaction to the track report provided by the Automated Perception. The thesis develops a new non-myopic and adaptive control for the vehicle. This is achieved by exploiting the predictive information and environmental rewards to optimize the future tracking performance. The formulation eventually leads to a new information-theoretic and environmental-based control. The main challenge of the surveillance solution then rests upon formulating a model that allows tracking performance to be enhanced via adaptive processing in the Automated Perception, and adaptive mobility by the Perception-Driven Control. A Unified Model is formulated in this thesis that amalgamates two models: (i) the Information-Theoretic Model - developed to define the manner at which the FM and CW acoustical, the navigational, and the environmental measurement uncertainties are propagated to the bistatic measurement uncertainties in the contacts; and (ii) the Environmental-Acoustic Model - built to predict the signal-to-noise power ratios (SNRs) of the FM and CW contacts. Explicit relationships are derived in this thesis using information theory to amalgamate these two models. Finally, an Integrated System is developed onboard each AUV that brings together all the above technologies to enhance the bistatic sonar tracking performance. The system is formulated as a closed-loop control system. This formulation provides a new Integrated Perception, Modeling, and Control Paradigm for an autonomous bistatic ASW surveillance solution using AUVs. The system is validated using the simulated data, and the real data collected from the Generic Littoral Interoperable Network Technology (GLINT) 2009 and 2010 experiments. The experiments were conducted jointly with the NATO Undersea Research Centre (NURC).by Raymond Hon Kit Lum.Sc.D

Improvement of detection and tracking techniques in multistatic passive radar systems. (Mejora de técnicas de detección y seguimiento en sistemas radar pasivos multiestáticos)

Esta tesis doctoral es el resultado de una intensa actividad investigadora centrada en los sensores radar pasivos para la mejora de las capacidades de detección y seguimiento en escenarios complejos con blancos terrestres y pequeños drones. El trabajo de investigación se ha llevado a cabo en el grupo de investigación coordinado por la Dra. María Pilar Jarabo Amores, dentro del marco diferentes proyectos: IDEPAR (“Improved DEtection techniques for PAssive Radars”), MASTERSAT (“MultichAnnel paSsive radar receiver exploiting TERrestrial and SATellite Illuminators”) y KRIPTON (“A Knowledge based appRoach to passIve radar detection using wideband sPace adapTive prOcessiNg”) financiados por el Ministerio de Economía y Competitividad de España; MAPIS (Multichannel passive ISAR imaging for military applications) y JAMPAR (“JAMmer-based PAssive Radar”), financiados por la Agencia Europea de Defensa (EDA) . El objetivo principal es la mejora de las técnicas de detección y seguimiento en radares pasivos con configuraciones biestáticas y multiestaticas. En el documento se desarrollan algoritmos para el aprovechamiento de señales procedentes de distintos iluminadores de oportunidad (transmisores DVB-T, satélites DVB-S y señales GPS). Las soluciones propuestas han sido integradas en el demostrador tecnológico IDEPAR, desarrollado y actualizado bajo los proyectos mencionados, y validadas en escenarios reales declarados de interés por potenciales usuarios finales (Direccion general de armamento y material, instituto nacional de tecnología aeroespacial y la armada española). Para el desarrollo y evaluación de cadenas de las cadenas de procesado, se plantean dos casos de estudio: blancos terrestres en escenarios semiurbanos edificios y pequeños blancos aéreos en escenarios rurales y costeros. Las principales contribuciones se pueden resumir en los siguientes puntos: • Diseño de técnicas de seguimiento 2D en el espacio de trabajo rango biestático-frecuencia Doppler: se desarrollan técnicas de seguimiento para los dos casos de estudio, localización de blancos terrestres y pequeños drones. Para es último se implementan técnicas capaces de seguir tanto el movimiento del dron como su firma Doppler, lo que permite implementar técnicas de clasificación de blancos. • Diseño de técnicas de seguimiento de blancos capaces de integrar información en el espacio 3D (rango, Doppler y acimut): se diseñan técnicas basadas en procesado en dos etapas, una primera con seguimiento en 2D para el filtrado de falsas alarmas y la segunda para el seguimiento en 3D y la conversión de coordenadas a un plano local cartesiano. Se comparan soluciones basadas en filtros de Kalman para sistemas tanto lineales como no lineales. • Diseño de cadenas de procesado para sistemas multiestáticos: la información estimada del blanco sobre múltiples geometrías biestáticas es utilizada para incremento de las capacidades de localización del blanco en el plano cartesiano local. Se presentan soluciones basadas en filtros de Kalman para sistemas no lineales explotando diferentes medidas biestáticas en el proceso de transformación de coordenadas, analizando las mejoras de precisión en la localización del blanco. • Diseño de etapas de procesado para radares pasivos basados en señales satelitales de las constelaciones GPS DVB-S. Se estudian las características de las señales satelitales identificando sus inconvenientes y proponiendo cadenas de procesado que permitan su utilización para la detección y seguimiento de blancos terrestres. • Estudio del uso de señales DVB-T multicanal con gaps de transmisión entre los diferentes canales en sistemas radares pasivos. Con ello se incrementa la resolución del sistema, y las capacidades de detección, seguimiento y localización. Se estudia el modelo de señal multicanal, sus efectos sobre el procesado coherente y se proponen cadenas de procesado para paliar los efectos adversos de este tipo de señales