5,662 research outputs found
Coded DS-CDMA Systems with Iterative Channel Estimation and no Pilot Symbols
In this paper, we describe direct-sequence code-division multiple-access
(DS-CDMA) systems with quadriphase-shift keying in which channel estimation,
coherent demodulation, and decoding are iteratively performed without the use
of any training or pilot symbols. An expectation-maximization
channel-estimation algorithm for the fading amplitude, phase, and the
interference power spectral density (PSD) due to the combined interference and
thermal noise is proposed for DS-CDMA systems with irregular repeat-accumulate
codes. After initial estimates of the fading amplitude, phase, and interference
PSD are obtained from the received symbols, subsequent values of these
parameters are iteratively updated by using the soft feedback from the channel
decoder. The updated estimates are combined with the received symbols and
iteratively passed to the decoder. The elimination of pilot symbols simplifies
the system design and allows either an enhanced information throughput, an
improved bit error rate, or greater spectral efficiency. The interference-PSD
estimation enables DS-CDMA systems to significantly suppress interference.Comment: To appear, IEEE Transactions on Wireless Communication
Massive MIMO-based Localization and Mapping Exploiting Phase Information of Multipath Components
In this paper, we present a robust multipath-based localization and mapping
framework that exploits the phases of specular multipath components (MPCs)
using a massive multiple-input multiple-output (MIMO) array at the base
station. Utilizing the phase information related to the propagation distances
of the MPCs enables the possibility of localization with extraordinary accuracy
even with limited bandwidth. The specular MPC parameters along with the
parameters of the noise and the dense multipath component (DMC) are tracked
using an extended Kalman filter (EKF), which enables to preserve the
distance-related phase changes of the MPC complex amplitudes. The DMC comprises
all non-resolvable MPCs, which occur due to finite measurement aperture. The
estimation of the DMC parameters enhances the estimation quality of the
specular MPCs and therefore also the quality of localization and mapping. The
estimated MPC propagation distances are subsequently used as input to a
distance-based localization and mapping algorithm. This algorithm does not need
prior knowledge about the surrounding environment and base station position.
The performance is demonstrated with real radio-channel measurements using an
antenna array with 128 ports at the base station side and a standard cellular
signal bandwidth of 40 MHz. The results show that high accuracy localization is
possible even with such a low bandwidth.Comment: 14 pages (two columns), 13 figures. This work has been submitted to
the IEEE Transaction on Wireless Communications for possible publication.
Copyright may be transferred without notice, after which this version may no
longer be accessibl
Estimation of Sparse MIMO Channels with Common Support
We consider the problem of estimating sparse communication channels in the
MIMO context. In small to medium bandwidth communications, as in the current
standards for OFDM and CDMA communication systems (with bandwidth up to 20
MHz), such channels are individually sparse and at the same time share a common
support set. Since the underlying physical channels are inherently
continuous-time, we propose a parametric sparse estimation technique based on
finite rate of innovation (FRI) principles. Parametric estimation is especially
relevant to MIMO communications as it allows for a robust estimation and
concise description of the channels. The core of the algorithm is a
generalization of conventional spectral estimation methods to multiple input
signals with common support. We show the application of our technique for
channel estimation in OFDM (uniformly/contiguous DFT pilots) and CDMA downlink
(Walsh-Hadamard coded schemes). In the presence of additive white Gaussian
noise, theoretical lower bounds on the estimation of SCS channel parameters in
Rayleigh fading conditions are derived. Finally, an analytical spatial channel
model is derived, and simulations on this model in the OFDM setting show the
symbol error rate (SER) is reduced by a factor 2 (0 dB of SNR) to 5 (high SNR)
compared to standard non-parametric methods - e.g. lowpass interpolation.Comment: 12 pages / 7 figures. Submitted to IEEE Transactions on Communicatio
Low Complexity Blind Equalization for OFDM Systems with General Constellations
This paper proposes a low-complexity algorithm for blind equalization of data
in OFDM-based wireless systems with general constellations. The proposed
algorithm is able to recover data even when the channel changes on a
symbol-by-symbol basis, making it suitable for fast fading channels. The
proposed algorithm does not require any statistical information of the channel
and thus does not suffer from latency normally associated with blind methods.
We also demonstrate how to reduce the complexity of the algorithm, which
becomes especially low at high SNR. Specifically, we show that in the high SNR
regime, the number of operations is of the order O(LN), where L is the cyclic
prefix length and N is the total number of subcarriers. Simulation results
confirm the favorable performance of our algorithm
Cramer-Rao bounds in the estimation of time of arrival in fading channels
This paper computes the Cramer-Rao bounds for the time of arrival estimation in a multipath Rice and Rayleigh fading scenario, conditioned to the previous estimation of a set of propagation channels, since these channel estimates (correlation between received signal and the pilot sequence) are sufficient statistics in the estimation of delays. Furthermore, channel estimation is a constitutive block in receivers, so we can take advantage of this information to improve timing estimation by using time and space diversity. The received signal is modeled as coming from a scattering environment that disperses the signal both in space and time. Spatial scattering is modeled with a Gaussian distribution and temporal dispersion as an exponential random variable. The impact of the sampling rate, the roll-off factor, the spatial and temporal correlation among channel estimates, the number of channel estimates, and the use of multiple sensors in the antenna at the receiver is studied and related to the mobile subscriber positioning issue. To our knowledge, this model is the only one of its kind as a result of the relationship between the space-time diversity and the accuracy of the timing estimation.Peer ReviewedPostprint (published version
- …