8 research outputs found

    Mobility and QoS-Aware Service Management for Cellular Networks

    Get PDF

    An optimised QPSK-based receiver structure for possibly sparse data transmission over narrowband and wideband communication systems

    Get PDF
    In this dissertation an in-depth study was conducted into the design, implementation and evaluation of a QPSK-based receiver structure for application in a UMTS WCDMA environment. The novelty of this work lies with the specific receiver architecture aimed to optimise the BER performance when possibly sparse data streams are transmitted. This scenario is a real possibility according to Verd´u et al [1] and Hagenauer et al [2–6]. A novel receiver structure was conceptualised, developed and evaluated in both narrowband and wideband scenarios, where it was found to outperform conventional receivers when a sparse data stream is transmitted. In order to reach the main conclusions of this study, it was necessary to develop a realistic simulation platform. The developed platform is capable of simulating a communication system meeting the physical layer requirements of the UMTS WCDMA standard. The platform can also perform narrowband simulations. A flexible channel emulator was developed that may be configured to simulate AWGN channel conditions, frequency non-selective fading (either Rayleigh or Rician with a configurable LOS component and Doppler spread), or a full multipath scenario where each path has a configurable LOS component, Doppler spread, path gain and path delay. It is therefore possible to even simulate a complex, yet realistic, COST207-TU channel model. The platform is also capable of simulating MUI. Each interfering user has a unique and independent multipath fading channel, while sharing the same bandwidth. Finally, the entire platform executes all simulations in baseband for improved simulation times. The research outputs of this work are summarised below: A parameter, the sparseness measure, was defined in order to quantify the level by which a data stream differs from an equiprobable data stream. A novel source model was proposed and developed to simulate data streams with a specified amount of sparseness. An introductory investigation was undertaken to determine the effect of simple FEC techniques on the sparseness of an encoded data stream. Novel receiver structures for both narrowband and wideband systems were proposed, developed and evaluated for systems where possibly sparse data streams may be transmitted. Analytic expressions were derived to take the effect of sparseness into account in communication systems, including expressions for the joint PDF of a BPSK branch, the optimal decision region of a detector in AWGN conditions as well as the BER performance of a communication system employing the proposed optimal receiver in both AWGN channel conditions as well as in flat fading channel conditions. Numerous BER performance curves were obtained comparing the proposed receiver structure with conventional receivers in a variety of channel conditions, including AWGN, frequency non-selective fading and a multipath COST207-TU channel environment, as well as the effect of MUI. AFRIKAANS : In hierdie verhandeling word ’n in-diepte studie gedoen rakende die ontwerp, implementasie en evaluasie van ’n KPSK-gebaseerde ontvanger struktuur wat in ’n UMTS WKVVT omgewing gebruik kan word. Die bydrae van hierdie werk lˆe in die spesifieke ontvanger argitektuur wat daarop mik om die BFT werksverrigting te optimeer wanneer yl data strome versend word. Hierdie is ’n realistiese moontlikheid volgens Verd´u et al [1] en Hagenauer et al [2–6]. ’n Nuwe ontvanger struktuur is gekonsepsualiseer, ontwikkel en evalueer vir beide noueband en wyeband stelsels, waar dit gevind is dat dit beter werksverrigting lewer as tradisionele ontvangers wanneer yl data strome versend word. Dit was nodig om ’n realistiese simulasie platform te ontwikkel om die belangrikste gevolgtrekkings van hierdie studie te kan maak. Die ontwikkelde platform is in staat om ’n kommunikasie stelsel te simuleer wat aan die fisiese laag vereistes van die UMTS WKVVT standaard voldoen. Die platform kan ook noueband stelsels simuleer. ’n Aanpasbare kanaal simulator is ontwikkel wat opgestel kan word om SWGR kanaal toestande, plat duining (beide Rayleigh of Ricies met ’n verstelbare siglyn komponent en Doppler verspreiding), sowel as ’n veelvuldige pad omgewing (waar elke unieke pad ’n verstelbare siglyn komponent, Doppler verspreiding, pad wins en pad vertraging het) te emuleer. Dit is selfs moontlik om ’n komplekse, maar steeds realistiese COST207-TU kanaal model te simuleer. Die platform het ook die vermo¨e om VGS te simuleer. Elke steurende gebruiker het ’n unieke en onafhanklike veelvuldige pad deinende kanaal, terwyl dieselfde bandwydte gedeel word. Laastens, alle simulasies van die platvorm word in basisband uitgevoer wat verkorte simulasie periodes verseker. Die navorsingsuitsette van hierdie werk kan as volg opgesom word: ’n Parameter, die ylheidsmaatstaf, is gedefin¨ýeer om dit moontlik te maak om die vlak waarmee die ylheid van ’n datastroom verskil van ’n ewekansige stroom te versyfer. ’n Nuwe bronmodel is voorgestel en ontwikkel om datastrome met ’n spesifieke ylheid te emuleer. ’n Inleidende ondersoek is onderneem om vas te stel wat die effek van VFK tegnieke op die ylheid van ’n enkodeerde datastroom is. Nuwe ontvanger strukture is voorgestel, ontwikkel en evalueer vir beide noueband en wyeband stelsels waar yl datastrome moontlik versend kan word. Analitiese uitdrukkings is afgelei om die effek van ylheid in ag te neem in kommunikasie stelsels. Uitdrukkings vir onder andere die gedeelte WDF van ’n BFVK tak, die optimale beslissingspunt van ’n detektor in SWGR toestande, sowel as die BFT werksverrigting van ’n kommunikasie stelsel wat van die voorgestelde optimale ontvangers gebruik maak, hetsy in SWGR of in plat duinende kanaal toestande. Talryke BFT werksverrigting krommes is verkry wat die voorgestelde ontvanger struktuur vergelyk met die konvensionele ontvangers in ’n verskeidenheid kanaal toestande, insluitend SWGR, plat duinende kanale en ’n veelvuldige pad COST207-TU kanaal omgewing, sowel as in die teenwoordigheid van VGS.</p CopyrightDissertation (MEng)--University of Pretoria, 2010.Electrical, Electronic and Computer Engineeringunrestricte

    Time diversity solutions to cope with lost packets

    Get PDF
    A dissertation submitted to Departamento de Engenharia Electrotécnica of Faculdade de Ciências e Tecnologia of Universidade Nova de Lisboa in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Engenharia Electrotécnica e de ComputadoresModern broadband wireless systems require high throughputs and can also have very high Quality-of-Service (QoS) requirements, namely small error rates and short delays. A high spectral efficiency is needed to meet these requirements. Lost packets, either due to errors or collisions, are usually discarded and need to be retransmitted, leading to performance degradation. An alternative to simple retransmission that can improve both power and spectral efficiency is to combine the signals associated to different transmission attempts. This thesis analyses two time diversity approaches to cope with lost packets that are relatively similar at physical layer but handle different packet loss causes. The first is a lowcomplexity Diversity-Combining (DC) Automatic Repeat reQuest (ARQ) scheme employed in a Time Division Multiple Access (TDMA) architecture, adapted for channels dedicated to a single user. The second is a Network-assisted Diversity Multiple Access (NDMA) scheme, which is a multi-packet detection approach able to separate multiple mobile terminals transmitting simultaneously in one slot using temporal diversity. This thesis combines these techniques with Single Carrier with Frequency Division Equalizer (SC-FDE) systems, which are widely recognized as the best candidates for the uplink of future broadband wireless systems. It proposes a new NDMA scheme capable of handling more Mobile Terminals (MTs) than the user separation capacity of the receiver. This thesis also proposes a set of analytical tools that can be used to analyse and optimize the use of these two systems. These tools are then employed to compare both approaches in terms of error rate, throughput and delay performances, and taking the implementation complexity into consideration. Finally, it is shown that both approaches represent viable solutions for future broadband wireless communications complementing each other.Fundação para a Ciência e Tecnologia - PhD grant(SFRH/BD/41515/2007); CTS multi-annual funding project PEst-OE/EEI/UI0066/2011, IT pluri-annual funding project PEst-OE/EEI/LA0008/2011, U-BOAT project PTDC/EEATEL/ 67066/2006, MPSat project PTDC/EEA-TEL/099074/2008 and OPPORTUNISTICCR project PTDC/EEA-TEL/115981/200

    Multi-carrier CDMA using convolutional coding and interference cancellation

    Get PDF
    SIGLEAvailable from British Library Document Supply Centre-DSC:DXN016251 / BLDSC - British Library Document Supply CentreGBUnited Kingdo

    On the capacity of rate adaptive modulation systems over fading channel

    Get PDF
    Ph.DDOCTOR OF PHILOSOPH

    Resource allocation for CDMA downlink to achieve maximum throughput

    Get PDF
    Growing interest in cellular phones, wireless modems, instant messaging, pagers with the increasing use of the Internet in daily life indicate that wireless high speed Internet access and wireless multimedia applications are in great demand. The barrier to satisfy this demand is the provision of sufficiently high bit rates in severe wireless mobile channel conditions, for a multitude of services, each requiring different and perhaps even time-varying quality of services (QoS) that can be more demanding than the QoS required by today\u27s voice service. New generation systems will enable provision of a multitude of services each with different QoS and data rate requirements. To resolve problems lying in the integration of new generation systems with today\u27s wireless voice services, several contributions are made as listed below. Signal processing techniques that help analyze the spectral properties and models representing the mobile wireless channel are increasingly important in new generation wireless systems for applications such as multipath mitigation, geolocation, line of sight detection. Models representing the mobile wireless channel and methods to trace the energy concentration in its spectrum are tested and effects of the channel environment are examined. After irregular subbands, equal bin subbands in frequency spectrum which corresponds to Discrete Multitone or Orthogonal Frequency Division Multiplexing methods are analyzed for multicarrier option of next generation wireless services. Noise levels in the multicarriers, environmental effects and availability of the channel are related to achievable bit rates using generic adaptive loading. Advantages/disadvantages ages of using multicarrier systems versus single carrier systems are analyzed with decision feedback equalization. In CDMA systems, for a fixed bandwidth allocation, the transmission rate can be altered by varying one or more of the coding, interleaving, modulation and spreading block parameters. In the downlink of DS-CDMA systems, once the parameters of the above mentioned blocks are set, the base station will transmit at the lowest power level that can provide the QoS requirements of the service provided. Different QoS and data rate requirements of communication channels can be satisfied by varying one or more of the coding, digital modulation and spreading blocks. By varying interblock data rates, bit error rate performance simulations are done with the constraint of keeping transmission bandwidth fixed for all configurations as in IS-95. Various coding, digital modulation and spreading rate combinations yield different performance characteristics in AWGN, flat fading and multipath fading environments allowing trade-off decisions on choices of rate, QoS, and implementation. In addition, performance characteristics of multicode CDMA downlink with systematic convolutional (Turbo) coding are obtained under shadowed multipath fading mobile channel. Two different iterative decoding methods are compared in two different synchronous downlink schemes operating under given channel conditions with the same transmission bandwidth as in IS-95. Multicode CDMA with LogMAP decoding is observed to provide better QoS with lower bit and frame error rates, reasonable complexity and shorter decoding delay compared to DS-CDMA downlink with single code pair assigned to each user. With this scheme, higher rate services can be overlayed on existing voice services without any modifications to existing active system architecture
    corecore