1,257 research outputs found
Carbon Black Reinforcement of Tyre Tread Compounds
The tyre industry is the leading consumer of rubber materials, accounting for approximately 70% of annual natural rubber production. The inherent properties and strength of rubber makes it suitable for engineering applications. However, to have useful lifetimes, rubber needs to be reinforced with fillers such as carbon black or silica. Fillers account for approximately 30% of materials by weight used in tyre tread compounds with CB being the most widely used reinforcing filler in tyres and engineering rubber materials. Various studies have shown that CB generally enhances properties such as modulus, tensile and tear strength, crack growth and abrasion resistance. For tyre tread applications, CB also influences other properties such as rolling resistance and grip. Less understood though, is how the morphological properties of CB influence fatigue and fracture properties of the rubber composite. The aim of this thesis is to conduct a systematic study to understand how these CB morphological properties including the structure and surface area affect reinforcement in tyre tread compounds. Eight different CB fillers varying widely in their structure and surface area were examined. The wide variation of CBs allows quantitative correlations to be drawn to understand the extent the CB properties affect these parameters. The CBs had an equivalent loading of 50 parts per hundred (phr) in natural rubber. An unfilled equivalent was also included. A series of experiments including conventional static and dynamic mechanical tests, strain induced crystallisation estimations, heat build-up and energy dissipation characterisation, fatigue crack growth resistance measurements, intrinsic and critical tear strength tests were conducted. Abrasion resistance as well as cut and chip resistance experiments were also performed. The results show the controlling CB morphological property is influenced by parameters such as the applied strain level, strain rate, severity of loading and the predominant deformation type (strain-, energy- or stress- controlled) in the test or application. Increasing CB surface area generally increases heat build-up and energy dissipation while CB structure affects crystallinity due to strain amplification effects. There is a step change in crack growth resistance below certain tearing energies which is attributed to the kinetics of strain induced crystallisation. There is a flip in ranking of cut and chip damage, with high structure CB compounds preferred at low impact forces and low structure CB compounds preferred at high impact forces. Abrasion tests show the formation of smear wear causes better abrasion resistance. The formation of smear wear is a factor of both the CB structure and surface area. Overall, the results highlight the difficulty to simultaneously optimise different parameters in tyre tread design. However, this work provides the tyre design engineer greater clarity on which CB to use to obtain a desired performance
Evaluation of Data Processing and Artifact Removal Approaches Used for Physiological Signals Captured Using Wearable Sensing Devices during Construction Tasks
Wearable sensing devices (WSDs) have enormous promise for monitoring construction worker safety. They can track workers and send safety-related information in real time, allowing for more effective and preventative decision making. WSDs are particularly useful on construction sites since they can track workers’ health, safety, and activity levels, among other metrics that could help optimize their daily tasks. WSDs may also assist workers in recognizing health-related safety risks (such as physical fatigue) and taking appropriate action to mitigate them. The data produced by these WSDs, however, is highly noisy and contaminated with artifacts that could have been introduced by the surroundings, the experimental apparatus, or the subject’s physiological state. These artifacts are very strong and frequently found during field experiments. So, when there is a lot of artifacts, the signal quality drops. Recently, artifacts removal has been greatly enhanced by developments in signal processing, which has vastly enhanced the performance. Thus, the proposed review aimed to provide an in-depth analysis of the approaches currently used to analyze data and remove artifacts from physiological signals obtained via WSDs during construction-related tasks. First, this study provides an overview of the physiological signals that are likely to be recorded from construction workers to monitor their health and safety. Second, this review identifies the most prevalent artifacts that have the most detrimental effect on the utility of the signals. Third, a comprehensive review of existing artifact-removal approaches were presented. Fourth, each identified artifact detection and removal approach was analyzed for its strengths and weaknesses. Finally, in conclusion, this review provides a few suggestions for future research for improving the quality of captured physiological signals for monitoring the health and safety of construction workers using artifact removal approaches
Vibration-based damage localisation: Impulse response identification and model updating methods
Structural health monitoring has gained more and more interest over the recent decades. As the technology has matured and monitoring systems are employed commercially, the development of more powerful and precise methods is the logical next step in this field. Especially vibration sensor networks with few measurement points combined with utilisation of ambient vibration sources are attractive for practical applications, as this approach promises to be cost-effective while requiring minimal modification to the monitored structures. Since efficient methods for damage detection have already been developed for such sensor networks, the research focus shifts towards extracting more information from the measurement data, in particular to the localisation and quantification of damage.
Two main concepts have produced promising results for damage localisation. The first approach involves a mechanical model of the structure, which is used in a model updating scheme to find the damaged areas of the structure. Second, there is a purely data-driven approach, which relies on residuals of vibration estimations to find regions where damage is probable. While much research has been conducted following these two concepts, different approaches are rarely directly compared using the same data sets. Therefore, this thesis presents advanced methods for vibration-based damage localisation using model updating as well as a data-driven method and provides a direct comparison using the same vibration measurement data.
The model updating approach presented in this thesis relies on multiobjective optimisation. Hence, the applied numerical optimisation algorithms are presented first. On this basis, the model updating parameterisation and objective function formulation is developed. The data-driven approach employs residuals from vibration estimations obtained using multiple-input finite impulse response filters. Both approaches are then verified using a simulated cantilever beam considering multiple damage scenarios. Finally, experimentally obtained data from an outdoor girder mast structure is used to validate the approaches. In summary, this thesis provides an assessment of model updating and residual-based damage localisation by means of verification and validation cases. It is found that the residual-based method exhibits numerical performance sufficient for real-time applications while providing a high sensitivity towards damage. However, the localisation accuracy is found to be superior using the model updating method
Advances and Applications of DSmT for Information Fusion. Collected Works, Volume 5
This fifth volume on Advances and Applications of DSmT for Information Fusion collects theoretical and applied contributions of researchers working in different fields of applications and in mathematics, and is available in open-access. The collected contributions of this volume have either been published or presented after disseminating the fourth volume in 2015 in international conferences, seminars, workshops and journals, or they are new. The contributions of each part of this volume are chronologically ordered.
First Part of this book presents some theoretical advances on DSmT, dealing mainly with modified Proportional Conflict Redistribution Rules (PCR) of combination with degree of intersection, coarsening techniques, interval calculus for PCR thanks to set inversion via interval analysis (SIVIA), rough set classifiers, canonical decomposition of dichotomous belief functions, fast PCR fusion, fast inter-criteria analysis with PCR, and improved PCR5 and PCR6 rules preserving the (quasi-)neutrality of (quasi-)vacuous belief assignment in the fusion of sources of evidence with their Matlab codes.
Because more applications of DSmT have emerged in the past years since the apparition of the fourth book of DSmT in 2015, the second part of this volume is about selected applications of DSmT mainly in building change detection, object recognition, quality of data association in tracking, perception in robotics, risk assessment for torrent protection and multi-criteria decision-making, multi-modal image fusion, coarsening techniques, recommender system, levee characterization and assessment, human heading perception, trust assessment, robotics, biometrics, failure detection, GPS systems, inter-criteria analysis, group decision, human activity recognition, storm prediction, data association for autonomous vehicles, identification of maritime vessels, fusion of support vector machines (SVM), Silx-Furtif RUST code library for information fusion including PCR rules, and network for ship classification.
Finally, the third part presents interesting contributions related to belief functions in general published or presented along the years since 2015. These contributions are related with decision-making under uncertainty, belief approximations, probability transformations, new distances between belief functions, non-classical multi-criteria decision-making problems with belief functions, generalization of Bayes theorem, image processing, data association, entropy and cross-entropy measures, fuzzy evidence numbers, negator of belief mass, human activity recognition, information fusion for breast cancer therapy, imbalanced data classification, and hybrid techniques mixing deep learning with belief functions as well
On the Utility of Representation Learning Algorithms for Myoelectric Interfacing
Electrical activity produced by muscles during voluntary movement is a reflection of the firing patterns of relevant motor neurons and, by extension, the latent motor intent driving the movement. Once transduced via electromyography (EMG) and converted into digital form, this activity can be processed to provide an estimate of the original motor intent and is as such a feasible basis for non-invasive efferent neural interfacing. EMG-based motor intent decoding has so far received the most attention in the field of upper-limb prosthetics, where alternative means of interfacing are scarce and the utility of better control apparent. Whereas myoelectric prostheses have been available since the 1960s, available EMG control interfaces still lag behind the mechanical capabilities of the artificial limbs they are intended to steer—a gap at least partially due to limitations in current methods for translating EMG into appropriate motion commands. As the relationship between EMG signals and concurrent effector kinematics is highly non-linear and apparently stochastic, finding ways to accurately extract and combine relevant information from across electrode sites is still an active area of inquiry.This dissertation comprises an introduction and eight papers that explore issues afflicting the status quo of myoelectric decoding and possible solutions, all related through their use of learning algorithms and deep Artificial Neural Network (ANN) models. Paper I presents a Convolutional Neural Network (CNN) for multi-label movement decoding of high-density surface EMG (HD-sEMG) signals. Inspired by the successful use of CNNs in Paper I and the work of others, Paper II presents a method for automatic design of CNN architectures for use in myocontrol. Paper III introduces an ANN architecture with an appertaining training framework from which simultaneous and proportional control emerges. Paper Iv introduce a dataset of HD-sEMG signals for use with learning algorithms. Paper v applies a Recurrent Neural Network (RNN) model to decode finger forces from intramuscular EMG. Paper vI introduces a Transformer model for myoelectric interfacing that do not need additional training data to function with previously unseen users. Paper vII compares the performance of a Long Short-Term Memory (LSTM) network to that of classical pattern recognition algorithms. Lastly, paper vIII describes a framework for synthesizing EMG from multi-articulate gestures intended to reduce training burden
The 2023 wearable photoplethysmography roadmap
Photoplethysmography is a key sensing technology which is used in wearable devices such as smartwatches and fitness trackers. Currently, photoplethysmography sensors are used to monitor physiological parameters including heart rate and heart rhythm, and to track activities like sleep and exercise. Yet, wearable photoplethysmography has potential to provide much more information on health and wellbeing, which could inform clinical decision making. This Roadmap outlines directions for research and development to realise the full potential of wearable photoplethysmography. Experts discuss key topics within the areas of sensor design, signal processing, clinical applications, and research directions. Their perspectives provide valuable guidance to researchers developing wearable photoplethysmography technology
Seamless Multimodal Biometrics for Continuous Personalised Wellbeing Monitoring
Artificially intelligent perception is increasingly present in the lives of
every one of us. Vehicles are no exception, (...) In the near future, pattern
recognition will have an even stronger role in vehicles, as self-driving cars
will require automated ways to understand what is happening around (and within)
them and act accordingly. (...) This doctoral work focused on advancing
in-vehicle sensing through the research of novel computer vision and pattern
recognition methodologies for both biometrics and wellbeing monitoring. The
main focus has been on electrocardiogram (ECG) biometrics, a trait well-known
for its potential for seamless driver monitoring. Major efforts were devoted to
achieving improved performance in identification and identity verification in
off-the-person scenarios, well-known for increased noise and variability. Here,
end-to-end deep learning ECG biometric solutions were proposed and important
topics were addressed such as cross-database and long-term performance,
waveform relevance through explainability, and interlead conversion. Face
biometrics, a natural complement to the ECG in seamless unconstrained
scenarios, was also studied in this work. The open challenges of masked face
recognition and interpretability in biometrics were tackled in an effort to
evolve towards algorithms that are more transparent, trustworthy, and robust to
significant occlusions. Within the topic of wellbeing monitoring, improved
solutions to multimodal emotion recognition in groups of people and
activity/violence recognition in in-vehicle scenarios were proposed. At last,
we also proposed a novel way to learn template security within end-to-end
models, dismissing additional separate encryption processes, and a
self-supervised learning approach tailored to sequential data, in order to
ensure data security and optimal performance. (...)Comment: Doctoral thesis presented and approved on the 21st of December 2022
to the University of Port
Synthetic Aperture Radar (SAR) Meets Deep Learning
This reprint focuses on the application of the combination of synthetic aperture radars and depth learning technology. It aims to further promote the development of SAR image intelligent interpretation technology. A synthetic aperture radar (SAR) is an important active microwave imaging sensor, whose all-day and all-weather working capacity give it an important place in the remote sensing community. Since the United States launched the first SAR satellite, SAR has received much attention in the remote sensing community, e.g., in geological exploration, topographic mapping, disaster forecast, and traffic monitoring. It is valuable and meaningful, therefore, to study SAR-based remote sensing applications. In recent years, deep learning represented by convolution neural networks has promoted significant progress in the computer vision community, e.g., in face recognition, the driverless field and Internet of things (IoT). Deep learning can enable computational models with multiple processing layers to learn data representations with multiple-level abstractions. This can greatly improve the performance of various applications. This reprint provides a platform for researchers to handle the above significant challenges and present their innovative and cutting-edge research results when applying deep learning to SAR in various manuscript types, e.g., articles, letters, reviews and technical reports
On factor models for high-dimensional time series
The aim of this thesis is to develop statistical methods for use with factor models for high-dimensional time series. We consider three broad areas: estimation, changepoint detection, and determination of the number of factors. In Chapter 1, we sketch the backdrop for our thesis and review key aspects of the literature. In Chapter 2, we develop a method to estimate the factors and parameters in an approximate dynamic factor model. Specifically, we present a spectral expectation-maximisation (or \spectral EM") algorithm, whereby we derive the E and M step equations in the frequency domain. Our E step relies on the Wiener-Kolmogorov smoother, the frequency domain counterpart of the Kalman smoother, and our M step is based on maximisation of the Whittle Likelihood with respect to the parameters of the model. We initialise our procedure using dynamic principal components analysis (or \dynamic PCA"), and by leveraging results on lag-window estimators of spectral density by Wu and Zaffaroni (2018), we establish consistency-with-rates of our spectral EM estimator of the parameters and factors as both the dimension (N) and the sample size (T) go to infinity. We find rates commensurate with the literature. Finally, we conduct a simulation study to numerically validate our theoretical results. In Chapter 3, we develop a sequential procedure to detect changepoints in an approximate static factor model. Specifically, we define a ratio of eigenvalues of the covariance matrix of N observed variables. We compute this ratio each period using a rolling window of size m over time, and declare a changepoint when its value breaches an alarm threshold. We investigate the asymptotic behaviour (as N;m ! 1) of our ratio, and prove that, for specific eigenvalues, the ratio will spike upwards when a changepoint is encountered but not otherwise. We use a block-bootstrap to obtain alarm thresholds. We present simulation results and an empirical application based on Financial Times Stock Exchange 100 Index (or \FTSE 100") data. In Chapter 4, we conduct an exploratory analysis which aims to extend the randomised sequential procedure of Trapani (2018) into the frequency domain. Specifically, we aim to estimate the number of dynamically loaded factors by applying the test of Trapani (2018) to eigenvalues of the estimated spectral density matrix (as opposed to the covariance matrix) of the data
Complexity Science in Human Change
This reprint encompasses fourteen contributions that offer avenues towards a better understanding of complex systems in human behavior. The phenomena studied here are generally pattern formation processes that originate in social interaction and psychotherapy. Several accounts are also given of the coordination in body movements and in physiological, neuronal and linguistic processes. A common denominator of such pattern formation is that complexity and entropy of the respective systems become reduced spontaneously, which is the hallmark of self-organization. The various methodological approaches of how to model such processes are presented in some detail. Results from the various methods are systematically compared and discussed. Among these approaches are algorithms for the quantification of synchrony by cross-correlational statistics, surrogate control procedures, recurrence mapping and network models.This volume offers an informative and sophisticated resource for scholars of human change, and as well for students at advanced levels, from graduate to post-doctoral. The reprint is multidisciplinary in nature, binding together the fields of medicine, psychology, physics, and neuroscience
- …