Quarc: a novel network-on-chip architecture

This paper introduces the Quarc NoC, a novel NoC architecture inspired by the Spidergon NoC. The Quarc scheme significantly outperforms the Spidergon NoC through balancing the traffic which is the result of the modifications applied to the topology and the routing elements.The proposed architecture is highly efficient in performing collective communication operations including broadcast and multicast. We present the topology, routing discipline and switch architecture for the Quarc NoC and demonstrate the performance with the results obtained from discrete event simulations

A performance model of multicast communication in wormhole-routed networks on-chip

Collective communication operations form a part of overall traffic in most applications running on platforms employing direct interconnection networks. This paper presents a novel analytical model to compute communication latency of multicast as a widely used collective communication operation. The novelty of the model lies in its ability to predict the latency of the multicast communication in wormhole-routed architectures employing asynchronous multi-port routers scheme. The model is applied to the Quarc NoC and its validity is verified by comparing the model predictions against the results obtained from a discrete-event simulator developed using OMNET++

Quarc: a high-efficiency network on-chip architecture

The novel Quarc NoC architecture, inspired by the Spidergon scheme is introduced as a NoC architecture that is highly efficient in performing collective communication operations including broadcast and multicast. The efficiency of the Quarc architecture is achieved through balancing the traffic which is the result of the modifications applied to the topology and the routing elements of the Spidergon NoC. This paper provides an ASIC implementation of both architectures using UMCpsilas 0.13 mum CMOS technology and demonstrates an analysis and comparison of the cost and performance between the Quarc and the Spidergon NoCs

Issues in designing transport layer multicast facilities

Multicasting denotes a facility in a communications system for providing efficient delivery from a message's source to some well-defined set of locations using a single logical address. While modem network hardware supports multidestination delivery, first generation Transport Layer protocols (e.g., the DoD Transmission Control Protocol (TCP) (15) and ISO TP-4 (41)) did not anticipate the changes over the past decade in underlying network hardware, transmission speeds, and communication patterns that have enabled and driven the interest in reliable multicast. Much recent research has focused on integrating the underlying hardware multicast capability with the reliable services of Transport Layer protocols. Here, we explore the communication issues surrounding the design of such a reliable multicast mechanism. Approaches and solutions from the literature are discussed, and four experimental Transport Layer protocols that incorporate reliable multicast are examined

A performance model of communication in the quarc NoC

Networks on-chip (NoC) emerged as a promising communication medium for future MPSoC development. To serve this purpose, the NoCs have to be able to efficiently exchange all types of traffic including the collective communications at a reasonable cost. The Quarc NoC is introduced as a NOC which is highly efficient in performing collective communication operations such as broadcast and multicast. This paper presents an introduction to the Quarc scheme and an analytical model to compute the average message latency in the architecture. To validate the model we compare the model latency prediction against the results obtained from discrete-event simulations

Roaming Real-Time Applications - Mobility Services in IPv6 Networks

Emerging mobility standards within the next generation Internet Protocol, IPv6, promise to continuously operate devices roaming between IP networks. Associated with the paradigm of ubiquitous computing and communication, network technology is on the spot to deliver voice and videoconferencing as a standard internet solution. However, current roaming procedures are too slow, to remain seamless for real-time applications. Multicast mobility still waits for a convincing design. This paper investigates the temporal behaviour of mobile IPv6 with dedicated focus on topological impacts. Extending the hierarchical mobile IPv6 approach we suggest protocol improvements for a continuous handover, which may serve bidirectional multicast communication, as well. Along this line a multicast mobility concept is introduced as a service for clients and sources, as they are of dedicated importance in multipoint conferencing applications. The mechanisms introduced do not rely on assumptions of any specific multicast routing protocol in use.Comment: 15 pages, 5 figure

Rapid Convergecast on Commodity Hardware: Performance Limits and Optimal Policies

ReSensePromo

Digital Switching in the Quantum Domain

In this paper, we present an architecture and implementation algorithm such that digital data can be switched in the quantum domain. First we define the connection digraph which can be used to describe the behavior of a switch at a given time, then we show how a connection digraph can be implemented using elementary quantum gates. The proposed mechanism supports unicasting as well as multicasting, and is strict-sense non-blocking. It can be applied to perform either circuit switching or packet switching. Compared with a traditional space or time domain switch, the proposed switching mechanism is more scalable. Assuming an n-by-n quantum switch, the space consumption grows linearly, i.e. O(n), while the time complexity is O(1) for unicasting, and O(log n) for multicasting. Based on these advantages, a high throughput switching device can be built simply by increasing the number of I/O ports.Comment: 24 pages, 16 figures, LaTe

Making Networks Robust to Component Failures

In this thesis, we consider instances of component failure in the Internet and in networked cyber-physical systems, such as the communication network used by the modern electric power grid (termed the smart grid). We design algorithms that make these networks more robust to various component failures, including failed routers, failures of links connecting routers, and failed sensors. This thesis divides into three parts: recovery from malicious or misconfigured nodes injecting false information into a distributed system (e.g., the Internet), placing smart grid sensors to provide measurement error detection, and fast recovery from link failures in a smart grid communication network. First, we consider the problem of malicious or misconfigured nodes that inject and spread incorrect state throughout a distributed system. Such false state can degrade the performance of a distributed system or render it unusable. For example, in the case of network routing algorithms, false state corresponding to a node incorrectly declaring a cost of 0 to all destinations (maliciously or due to misconfiguration) can quickly spread through the network. This causes other nodes to (incorrectly) route via the misconfigured node, resulting in suboptimal routing and network congestion. We propose three algorithms for efficient recovery in such scenarios and evaluate their efficacy. The last two parts of this thesis consider robustness in the context of the electric power grid. We study the use and placement of a sensor, called a Phasor Measurement Unit (PMU), currently being deployed in electric power grids worldwide. PMUs provide voltage and current measurements at a sampling rate orders of magnitude higher than the status quo. As a result, PMUs can both drastically improve existing power grid operations and enable an entirely new set of applications, such as the reliable integration of renewable energy resources. However, PMU applications require correct (addressed in thesis part 2) and timely(covered in thesis part 3) PMU data. Without these guarantees, smart grid operators and applications may make incorrect decisions and take corresponding (incorrect) actions. The second part of this thesis addresses PMU measurement errors, which have been observed in practice. We formulate a set of PMU placement problems that aim to satisfy two constraints: place PMUs near each other to allow for measurement error detection and use the minimal number of PMUs to infer the state of the maximum number of system buses and transmission lines. For each PMU placement problem, we prove it is NP-Complete, propose a simple greedy approximation algorithm, and evaluate our greedy solutions. In the last part of this thesis, we design algorithms for fast recovery from link failures in a smart grid communication network. We propose, design, and evaluate solutions to all three aspects of link failure recovery: (a) link failure detection, (b) algorithms for pre-computing backup multicast trees, and (c) fast backup tree installation. To address (a), we design link-failure detection and reporting mechanisms that use OpenFlow to detect link failures when and where they occur inside the network. OpenFlow is an open source framework that cleanly separates the control and data planes for use in network management and control. For part (b), we formulate a new problem, Multicast Recycling, that pre-computes backup multicast trees that aim to minimize control plane signaling overhead. We prove Multicast Recycling is at least NP-hard and present a corresponding approximation algorithm. Lastly, two control plane algorithms are proposed that signal data plane switches to install pre-computed backup trees. An optimized version of each installation algorithm is designed that finds a near minimum set of forwarding rules by sharing forwarding rules across multicast groups. This optimization reduces backup tree install time and associated control state. We implement these algorithms using the POX open-source OpenFlow controller and evaluate them using the Mininet emulator, quantifying control plane signaling and installation time

Protocols for collaborative applications on overlay networks.

Third, we address the limitations of traditional multicasting models. Towards this, we propose a model where a source node has different switching time for each child node and the message arrival time at each child depends on the order in which the source chooses to send the messages. This model captures the heterogeneous nature of communication links and node hardware on the overlay network. Given a multicast tree with link delays and generalized switching delay vectors at each non-leaf node, we provide an algorithm which schedules the message delivery at each non-leaf node in order to minimize the delay of the multicast tree.First, we consider the floor control problem wherein the participating users coordinate among themselves to gain exclusive access to the communication channel. To solve the floor control problem, we present an implementation and evaluation of distributed Medium Access Control (MAC) protocols on overlay networks. As an initial step in the implementation of these MAC protocols, we propose an algorithm to construct an efficient communication channel among the participating users in the overlay network. We also show that our implementation scheme (one of the first among decentralized floor control protocols) preserves the causal ordering of messages.Our research is focused on the development of algorithms for the construction of overlay networks that meet the demands of the distributed applications. In addition, we have provided network protocols that can be executed on these overlay networks for a chosen set of collaborative applications: floor control and multicasting. Our contribution in this research is four fold.Fourth, we address the problem of finding an arbitrary application designer specific overlay network on the Internet. This problem is equivalent to the problem of subgraph homeomorphism and it is NP-Complete. We have designed a polynomial-time algorithm to determine if a delay constrained multicasting tree (call it a guest) can be homeomorphically embedded in a general network (call it a host). A delay constrained multicasting tree is a tree wherein the link weights correspond to the maximum allowable delay between the end nodes of the link and in addition, the link of the guest should be mapped to a shortest path in the host. Such embeddings will allow distributed application to be executed in such a way that application specific quality-of-service demands can be met. (Abstract shortened by UMI.)Second, we address the problem of designing multicasting sub-network for collaborative applications using which messages are required to arrive at the destinations within a specified delay bound and all the destinations must receive the message from a source at 'approximately' the same time. The problem of finding a multicasting sub-network with delay and delay-variation bound has been proved to be NP-Complete in the literature and several heuristics have been proposed