496 research outputs found
Proposition of Dynamic Virtual Link for IPv6 GeoNetworking (GN6) in ETSI
A proposition to ETSI ITS WP3.First, we describe the limitation of Draft EN 302 636-6-1 V0.1.2 (2012-11). Note that this study is based on year November 2012 versions of the ETSI Standards and that the standards constantly evolve. As a result, parameters, primitives and virtual links on GN6ASL may have changed at the time of reading. To overcome the limitation, we propose Dynamic Virtual Link (DVL)
A practical approach to network-based processing
The usage of general-purpose processors externally attached to routers to play virtually the role of active coprocessors seems a safe and cost-effective approach to add active network capabilities to existing routers. This paper reviews this router-assistant way of making active nodes, addresses the benefits and limitations of this technique, and describes a new platform based on it using an enhanced commercial router. The features new to this type of architecture are transparency, IPv4 and IPv6 support, and full control over layer 3 and above. A practical experience with two applications for path characterization and a transport gateway managing multi-QoS is described.Most of this work has been funded by the IST project GCAP (Global Communication Architecture and Protocols for new QoS services over IPv6 networks) IST-1999-10 504. Further development and application to practical scenarios is being supported by IST project Opium (Open Platform for Integration of UMTS Middleware) IST-2001-36063 and the Spanish MCYT under projects TEL99-0988-C02-01 and AURAS TIC2001-1650-C02-01.Publicad
Secure Network Access via LDAP
Networks need the ability to be access by secure accounts and users. The goal of this project is to configure and expand on LDAP configurations with considerations for AAA via TACACS+ and Radius for network equipment. This will provide adequate security for any given network in terms of access and prevent lose of access to devices which happens all to often with locally configured accounts on devices
Communication Architecture For Distributed Interactive Simulation (CADIS): Rationale Document Draft
Report on necessary communication system protocol data unit standards which must be accepted and adopted for supporting distributed interactive simulation
Software Defined Radio for NB-IoT
The next generation of mobile radio systems is expected to providing wireless connectivity for a wide range of new applications and services involving not only people but also machines and objects. Within few years, billions of low-cost and low-complexity devices and sensors will be connected to the Internet, forming a converged ecosystem called Internet of Things
(IoT). As a result, in 2016, 3GPP standardizes NB-IoT, the new narrowband radio technology developed for the IoT market. Massive connectivity, reduced UE complexity, coverage
extension and deployment flexibility are the targets for this new radio interface, which also ensures harmonious coexistence with current GSM, GPRS and LTE systems. In parallel, the rise of open-source software combined with Software Defined Radio (SDR) solutions has completely changed radio systems engineering in the late years. This thesis focuses on developing the NB-IoTâs protocol stack on the EURECOMâs open-source software platform OpenAirInterface (OAI). First part of this work aims to implement NB-IoTâs Radio Resource Control functionalities on OAI. After an introduction to the platform architecture, a new RRC layer code structure and related interfaces are defined, along with a new approach for Signalling Radio Bearers management. A deep analysis on System Information scheduling is conducted and a subframe-based transmission scheme is then proposed. The last part of this thesis addresses the implementation of a multi-vendor platform interface based on Small Cell Forumâs Functional Application Platform Interface (FAPI) standard. A configurable and dynamically loadable Interface Module (IF-Module) is designed between OAIâs MAC and PHY layers. Primitives and related code structures are presented as well as corresponding Data
and Configurationâs procedures. Finally, the convergence of both NB-IoT and FAPI requirements lead to re-design PHY layer mechanisms for which a downlink transmission scheme is
proposed
Guidance Document Draft: Communication Architecture For Distributed Interactive Simulation (CADIS)
Report on necessary communication system protocol data unit standards which must be accepted and adopted for supporting distributed interactive simulation
Management of Digital Video Broadcasting Services in Open Delivery Platforms
The future of Digital Video Broadcasting (DVB) is moving towards solutions offering an efficient way of carrying interactive IP multimedia services over digital terrestrial broadcasting networks to handheld terminals. One of the most promising technologies is Digital Video Broadcasting-Handheld (DVB-H), at present under standardisation. Services deployed via this type of DVB technologies should enjoy reliability comparable to TV services and high quality standards. However, the market at present does not provide effective and economical solutions for the deployment of such services over multi-domain IP networks, due to their high level of unreliability. This paper focuses on service management, service level agreement (SLA) and network performance requirements of DVB-H services. Experimental results are presented concerning QoS sensitivity to network performance of DVB-H services delivered over a multi-domain IP network. Moreover, a solution for efficient and cost effective service management via QoS monitoring and control and network SLA design is proposed. The solution gives DVB-H operators the possibility of fully managing service QoS without being tied to third party operators
Efficient Broadcast for Multicast-Capable Interconnection Networks
The broadcast function MPI_Bcast() from the
MPI-1.1 standard is one of the most heavily
used collective operations for the message
passing programming paradigm.
This diploma thesis makes use of a feature called
"Multicast", which is supported by several
network technologies (like Ethernet or
InfiniBand), to create an efficient MPI_Bcast()
implementation, especially for large communicators
and small-sized messages.
A preceding analysis of existing real-world
applications leads to an algorithm which does not
only perform well for synthetical benchmarks
but also even better for a wide class of
parallel applications. The finally derived
broadcast has been implemented for the
open source MPI library "Open MPI" using
IP multicast.
The achieved results prove that
the new broadcast is usually always better
than existing point-to-point implementations,
as soon as the number of MPI processes exceeds the
8 node boundary. The performance gain reaches
a factor of 4.9 on 342 nodes, because the
new algorithm scales practically independently
of the number of involved processes.Die Broadcastfunktion MPI_Bcast() aus dem MPI-1.1
Standard ist eine der meistgenutzten kollektiven
Kommunikationsoperationen des nachrichtenbasierten
Programmierparadigmas.
Diese Diplomarbeit nutzt die MulticastfÀhigkeit,
die von mehreren Netzwerktechnologien (wie Ethernet
oder InfiniBand) bereitgestellt wird, um eine
effiziente MPI_Bcast() Implementation zu erschaffen,
insbesondere fĂŒr groĂe Kommunikatoren und kleinere
NachrichtengröĂen.
Eine vorhergehende Analyse von existierenden
parallelen Anwendungen fĂŒhrte dazu, dass der neue
Algorithmus nicht nur bei synthetischen Benchmarks
gut abschneidet, sondern sein Potential bei echten
Anwendungen noch besser entfalten kann. Der
letztendlich daraus entstandene Broadcast wurde
fĂŒr die Open-Source MPI Bibliothek "Open MPI"
entwickelt und basiert auf IP Multicast.
Die erreichten Ergebnisse belegen, dass der neue
Broadcast ĂŒblicherweise immer besser als jegliche
Punkt-zu-Punkt Implementierungen ist, sobald die
Anzahl von MPI Prozessen die Grenze von 8 Knoten
ĂŒberschreitet. Der Geschwindigkeitszuwachs
erreicht einen Faktor von 4,9 bei 342 Knoten,
da der neue Algorithmus praktisch unabhÀngig
von der Knotenzahl skaliert
- âŠ