1,675 research outputs found
An Inverse Dynamics Approach to Control Lyapunov Functions
With the goal of moving towards implementation of increasingly dynamic behaviors on underactuated systems, this paper presents an optimization-based approach for solving full-body dynamics based controllers on underactuated bipedal robots. The primary focus of this paper is on the development of an alternative approach to the implementation of controllers utilizing control Lyapunov function based quadratic programs. This approach utilizes many of the desirable aspects from successful inverse dynamics based controllers in the literature, while also incorporating a variant of control Lyapunov functions that renders better convergence in the context of tracking outputs. The principal benefits of this formulation include a greater ability to add costs which regulate the resulting behavior of the robot. In addition, the model error-prone inertia matrix is used only once, in a non-inverted form. The result is a successful demonstration of the controller for walking in simulation, and applied on hardware in real-time for dynamic crouching
Dynamic modeling, property investigation, and adaptive controller design of serial robotic manipulators modeled with structural compliance
Research results on general serial robotic manipulators modeled with structural compliances are presented. Two compliant manipulator modeling approaches, distributed and lumped parameter models, are used in this study. System dynamic equations for both compliant models are derived by using the first and second order influence coefficients. Also, the properties of compliant manipulator system dynamics are investigated. One of the properties, which is defined as inaccessibility of vibratory modes, is shown to display a distinct character associated with compliant manipulators. This property indicates the impact of robot geometry on the control of structural oscillations. Example studies are provided to illustrate the physical interpretation of inaccessibility of vibratory modes. Two types of controllers are designed for compliant manipulators modeled by either lumped or distributed parameter techniques. In order to maintain the generality of the results, neither linearization is introduced. Example simulations are given to demonstrate the controller performance. The second type controller is also built for general serial robot arms and is adaptive in nature which can estimate uncertain payload parameters on-line and simultaneously maintain trajectory tracking properties. The relation between manipulator motion tracking capability and convergence of parameter estimation properties is discussed through example case studies. The effect of control input update delays on adaptive controller performance is also studied
Human-friendly robotic manipulators: safety and performance issues in controller design
Recent advances in robotics have spurred its adoption into new application areas such as medical, rescue, transportation, logistics, personal care and entertainment. In the personal care domain, robots are expected to operate in human-present environments and provide non-critical assistance. Successful and flourishing deployment of such robots present different opportunities as well as challenges. Under a national research project, Bobbie, this dissertation analyzes challenges associated with these robots and proposes solutions for identified problems. The thesis begins by highlighting the important safety concern and presenting a comprehensive overview of safety issues in a typical domestic robot system. By using functional safety concept, the overall safety of the complex robotic system was analyzed through subsystem level safety issues. Safety regions in the world model of the perception subsystem, dependable understanding of the unstructured environment via fusion of sensory subsystems, lightweight and compliant design of mechanical components, passivity based control system and quantitative metrics used to assert safety are some important points discussed in the safety review. The main research focus of this work is on controller design of robotic manipulators against two conflicting requirements: motion performance and safety. Human-friendly manipulators used on domestic robots exhibit a lightweight design and demand a stable operation with a compliant behavior injected via a passivity based impedance controller. Effective motion based manipulation using such a controller requires a highly stiff behavior while important safety requirements are achieved with compliant behaviors. On the basis of this intuitive observation, this research identifies suitable metrics to identify the appropriate impedance for a given performance and safety requirement. This thesis also introduces a domestic robot design that adopts a modular design approach to minimize complexity, cost and development time. On the basis of functional modularity concept where each module has a unique functional contribution in the system, the robot “Bobbie-UT‿ is built as an interconnection of interchangeable mobile platform, torso, robotic arm and humanoid head components. Implementation of necessary functional and safety requirements, design of interfaces and development of suitable software architecture are also discussed with the design
Performance of modified jatropha oil in combination with hexagonal boron nitride particles as a bio-based lubricant for green machining
This study evaluates the machining performance of newly developed modified jatropha oils (MJO1, MJO3 and MJO5), both with and without hexagonal boron nitride (hBN) particles (ranging between 0.05 and 0.5 wt%) during turning of AISI 1045 using minimum quantity lubrication (MQL). The experimental results indicated that, viscosity improved with the increase in MJOs molar ratio and hBN concentration. Excellent tribological behaviours is found to correlated with a better machining performance were achieved by MJO5a with 0.05 wt%. The MJO5a sample showed the lowest values of cutting force, cutting temperature and surface roughness, with a prolonged tool life and less tool wear, qualifying itself to be a potential alternative to the synthetic ester, with regard to the environmental concern
Safe Robotic Grasping: Minimum Impact-Force Grasp Selection
This paper addresses the problem of selecting from a choice of possible
grasps, so that impact forces will be minimised if a collision occurs while the
robot is moving the grasped object along a post-grasp trajectory. Such
considerations are important for safety in human-robot interaction, where even
a certified "human-safe" (e.g. compliant) arm may become hazardous once it
grasps and begins moving an object, which may have significant mass, sharp
edges or other dangers. Additionally, minimising collision forces is critical
to preserving the longevity of robots which operate in uncertain and hazardous
environments, e.g. robots deployed for nuclear decommissioning, where removing
a damaged robot from a contaminated zone for repairs may be extremely difficult
and costly. Also, unwanted collisions between a robot and critical
infrastructure (e.g. pipework) in such high-consequence environments can be
disastrous. In this paper, we investigate how the safety of the post-grasp
motion can be considered during the pre-grasp approach phase, so that the
selected grasp is optimal in terms applying minimum impact forces if a
collision occurs during a desired post-grasp manipulation. We build on the
methods of augmented robot-object dynamics models and "effective mass" and
propose a method for combining these concepts with modern grasp and trajectory
planners, to enable the robot to achieve a grasp which maximises the safety of
the post-grasp trajectory, by minimising potential collision forces. We
demonstrate the effectiveness of our approach through several experiments with
both simulated and real robots.Comment: To be appeared in IEEE/RAS IROS 201
Autonomy Infused Teleoperation with Application to BCI Manipulation
Robot teleoperation systems face a common set of challenges including
latency, low-dimensional user commands, and asymmetric control inputs. User
control with Brain-Computer Interfaces (BCIs) exacerbates these problems
through especially noisy and erratic low-dimensional motion commands due to the
difficulty in decoding neural activity. We introduce a general framework to
address these challenges through a combination of computer vision, user intent
inference, and arbitration between the human input and autonomous control
schemes. Adjustable levels of assistance allow the system to balance the
operator's capabilities and feelings of comfort and control while compensating
for a task's difficulty. We present experimental results demonstrating
significant performance improvement using the shared-control assistance
framework on adapted rehabilitation benchmarks with two subjects implanted with
intracortical brain-computer interfaces controlling a seven degree-of-freedom
robotic manipulator as a prosthetic. Our results further indicate that shared
assistance mitigates perceived user difficulty and even enables successful
performance on previously infeasible tasks. We showcase the extensibility of
our architecture with applications to quality-of-life tasks such as opening a
door, pouring liquids from containers, and manipulation with novel objects in
densely cluttered environments
Robot Manipulators
Robot manipulators are developing more in the direction of industrial robots than of human workers. Recently, the applications of robot manipulators are spreading their focus, for example Da Vinci as a medical robot, ASIMO as a humanoid robot and so on. There are many research topics within the field of robot manipulators, e.g. motion planning, cooperation with a human, and fusion with external sensors like vision, haptic and force, etc. Moreover, these include both technical problems in the industry and theoretical problems in the academic fields. This book is a collection of papers presenting the latest research issues from around the world
- …