1,877 research outputs found
Performance Comparison of Dual Connectivity and Hard Handover for LTE-5G Tight Integration
Communications at frequencies above 10 GHz (the mmWave band) are expected to
play a major role for the next generation of cellular networks (5G), because of
the potential multi-gigabit, ultra-low latency performance of this technology.
mmWave frequencies however suffer from very high isotropic pathloss, which may
result in cells with a much smaller coverage area than current LTE macrocells.
High directionality techniques will be used to improve signal quality and
extend coverage area, along with a high density deployment of mmWave base
stations (BS). However, when propagation conditions are hard and it is
difficult to provide high quality coverage with mmWave BS, it is necessary to
rely on previous generation LTE base stations, which make use of lower
frequencies (900 MHz - 3.5 GHz), which are less sensitive to blockage and
experience lower pathloss. In order to provide ultra-reliable services to
mobile users there is a need for network architectures that tightly and
seamlessly integrate the LTE and mmWave Radio Access Technologies. In this
paper we will present two possible alternatives for this integration and show
how simulation tools can be used to assess and compare their performance.Comment: This paper was accepted for presentation at the ninth EAI SIMUtools
2016 conference, August 22 - 23, 2016, Prague, Czech Republi
60 GHz MAC Standardization: Progress and Way Forward
Communication at mmWave frequencies has been the focus in the recent years.
In this paper, we discuss standardization efforts in 60 GHz short range
communication and the progress therein. We compare the available standards in
terms of network architecture, medium access control mechanisms, physical layer
techniques and several other features. Comparative analysis indicates that IEEE
802.11ad is likely to lead the short-range indoor communication at 60 GHz. We
bring to the fore resolved and unresolved issues pertaining to robust WLAN
connectivity at 60 GHz. Further, we discuss the role of mmWave bands in 5G
communication scenarios and highlight the further efforts required in terms of
research and standardization
An Efficient Uplink Multi-Connectivity Scheme for 5G mmWave Control Plane Applications
The millimeter wave (mmWave) frequencies offer the potential of orders of
magnitude increases in capacity for next-generation cellular systems. However,
links in mmWave networks are susceptible to blockage and may suffer from rapid
variations in quality. Connectivity to multiple cells - at mmWave and/or
traditional frequencies - is considered essential for robust communication. One
of the challenges in supporting multi-connectivity in mmWaves is the
requirement for the network to track the direction of each link in addition to
its power and timing. To address this challenge, we implement a novel uplink
measurement system that, with the joint help of a local coordinator operating
in the legacy band, guarantees continuous monitoring of the channel propagation
conditions and allows for the design of efficient control plane applications,
including handover, beam tracking and initial access. We show that an
uplink-based multi-connectivity approach enables less consuming, better
performing, faster and more stable cell selection and scheduling decisions with
respect to a traditional downlink-based standalone scheme. Moreover, we argue
that the presented framework guarantees (i) efficient tracking of the user in
the presence of the channel dynamics expected at mmWaves, and (ii) fast
reaction to situations in which the primary propagation path is blocked or not
available.Comment: Submitted for publication in IEEE Transactions on Wireless
Communications (TWC
Caching-Aided Collaborative D2D Operation for Predictive Data Dissemination in Industrial IoT
Industrial automation deployments constitute challenging environments where
moving IoT machines may produce high-definition video and other heavy sensor
data during surveying and inspection operations. Transporting massive contents
to the edge network infrastructure and then eventually to the remote human
operator requires reliable and high-rate radio links supported by intelligent
data caching and delivery mechanisms. In this work, we address the challenges
of contents dissemination in characteristic factory automation scenarios by
proposing to engage moving industrial machines as device-to-device (D2D)
caching helpers. With the goal to improve reliability of high-rate
millimeter-wave (mmWave) data connections, we introduce the alternative
contents dissemination modes and then construct a novel mobility-aware
methodology that helps develop predictive mode selection strategies based on
the anticipated radio link conditions. We also conduct a thorough system-level
evaluation of representative data dissemination strategies to confirm the
benefits of predictive solutions that employ D2D-enabled collaborative caching
at the wireless edge to lower contents delivery latency and improve data
acquisition reliability
Integration of Carrier Aggregation and Dual Connectivity for the ns-3 mmWave Module
Thanks to the wide availability of bandwidth, the millimeter wave (mmWave)
frequencies will provide very high data rates to mobile users in next
generation 5G cellular networks. However, mmWave links suffer from high
isotropic pathloss and blockage from common materials, and are subject to an
intermittent channel quality. Therefore, protocols and solutions at different
layers in the cellular network and the TCP/IP protocol stack have been proposed
and studied. A valuable tool for the end-to-end performance analysis of mmWave
cellular networks is the ns-3 mmWave module, which already models in detail the
channel, Physical (PHY) and Medium Access Control (MAC) layers, and extends the
Long Term Evolution (LTE) stack for the higher layers. In this paper we present
an implementation for the ns-3 mmWave module of multi connectivity techniques
for 3GPP New Radio (NR) at mmWave frequencies, namely Carrier Aggregation (CA)
and Dual Connectivity (DC), and discuss how they can be integrated to increase
the functionalities offered by the ns-3 mmWave module.Comment: 9 pages, 7 figures, submitted to the Workshop on ns-3 (WNS3) 201
Toward End-to-End, Full-Stack 6G Terahertz Networks
Recent evolutions in semiconductors have brought the terahertz band in the
spotlight as an enabler for terabit-per-second communications in 6G networks.
Most of the research so far, however, has focused on understanding the physics
of terahertz devices, circuitry and propagation, and on studying physical layer
solutions. However, integrating this technology in complex mobile networks
requires a proper design of the full communication stack, to address link- and
system-level challenges related to network setup, management, coordination,
energy efficiency, and end-to-end connectivity. This paper provides an overview
of the issues that need to be overcome to introduce the terahertz spectrum in
mobile networks, from a MAC, network and transport layer perspective, with
considerations on the performance of end-to-end data flows on terahertz
connections.Comment: Published on IEEE Communications Magazine, THz Communications: A
Catalyst for the Wireless Future, 7 pages, 6 figure
End-to-End Simulation of 5G mmWave Networks
Due to its potential for multi-gigabit and low latency wireless links,
millimeter wave (mmWave) technology is expected to play a central role in 5th
generation cellular systems. While there has been considerable progress in
understanding the mmWave physical layer, innovations will be required at all
layers of the protocol stack, in both the access and the core network.
Discrete-event network simulation is essential for end-to-end, cross-layer
research and development. This paper provides a tutorial on a recently
developed full-stack mmWave module integrated into the widely used open-source
ns--3 simulator. The module includes a number of detailed statistical channel
models as well as the ability to incorporate real measurements or ray-tracing
data. The Physical (PHY) and Medium Access Control (MAC) layers are modular and
highly customizable, making it easy to integrate algorithms or compare
Orthogonal Frequency Division Multiplexing (OFDM) numerologies, for example.
The module is interfaced with the core network of the ns--3 Long Term Evolution
(LTE) module for full-stack simulations of end-to-end connectivity, and
advanced architectural features, such as dual-connectivity, are also available.
To facilitate the understanding of the module, and verify its correct
functioning, we provide several examples that show the performance of the
custom mmWave stack as well as custom congestion control algorithms designed
specifically for efficient utilization of the mmWave channel.Comment: 25 pages, 16 figures, submitted to IEEE Communications Surveys and
Tutorials (revised Jan. 2018
- …